10°C til +250°C / 749 literMemmert Universal - Wärmeschrank
UFP 800
10°C til +250°C / 749 liter
Memmert Universal - Wärmeschrank
UFP 800
Tilstand
Brukt
Plassering
Borken 

Bilder viser
Vis kart
Data om maskinen
- Maskinbetegnelse:
- 10°C til +250°C / 749 liter
- Produsent:
- Memmert Universal - Wärmeschrank
- Modell:
- UFP 800
- Tilstand:
- svært god (brukt)
Pris og beliggenhet
- Plassering:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Ring
Detaljer om tilbudet
- Annonse-ID:
- A21310222
- Referansenummer:
- 25067
- Oppdatering:
- sist oppdatert 24.02.2026
Beskrivelse
Memmert
Type: UFP 800
Standard Equipment of the Device
- Electronic fuzzy-assisted PID process controller with continuous power adjustment and a time-saving self-diagnostic system for rapid fault detection (see chapter "Error Messages")
- Language selection
- Alphanumeric text display
- Internal protocol memory with 1024 kB for recording actual temperature, setpoint temperature, air turbine, air flap, and fault conditions with timestamp
- Device control and logging of actual values on MEMoryCard XL
- Program sequence control for up to 40 ramp segments
- Adjustable air turbine in convection ovens (setting in 10% increments)
- Servo-motor controlled adjustable air flap (setting in 10% increments) for convection or fresh air operation
- Integrated weekly timer with group function (e.g., all working days)
- Retractable push/turn encoder for easy operation
- Visual alarm indicator
- Built-in buzzer for alarm in case of limit violation, as an acoustic signal at program end and confirmation of input (key click)
- Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint tracking monitor (ASF)
- Mechanical temperature limiter (TB safety class 1)
- Monitoring relay for heater shutdown in case of malfunction
- Two separate PT100 temperature sensors, DIN class A, 4-wire configuration for regulation and monitoring
- Convenient integrated 3-point temperature calibration
Lsdpfxoymm Erj Agtjhc
- Temperature-dependent control chamber and door ventilation
- Parallel printer interface (PCL3 compatible)
- Serial RS-232C interface for computer-aided temperature programs and for reading the controller’s internal protocol memory
Technical Data:
- Interior: made of stainless steel, highly stable and easy to clean due to deep-drawn ribbing.
- Housing (exterior body): textured stainless steel, rear panel made of hot-dip galvanized steel sheet.
- UFP 800 mobile and lockable on wheels.
- External dimensions: width 1190 mm, depth 750 mm, height 1620 mm
- Internal dimensions: width 1040 mm, depth 600 mm, height 1200 mm
- Volume approx. 749 liters
- Weight approx. 170 kg
- Power supply: 3N~ 400 V 50/60 Hz
- Power consumption approx. 4800 W, 7A
- Condition: used
- Scope of delivery: (see picture)
(Specifications and details subject to change and errors excepted!)
We are happy to answer further questions by phone.
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Type: UFP 800
Standard Equipment of the Device
- Electronic fuzzy-assisted PID process controller with continuous power adjustment and a time-saving self-diagnostic system for rapid fault detection (see chapter "Error Messages")
- Language selection
- Alphanumeric text display
- Internal protocol memory with 1024 kB for recording actual temperature, setpoint temperature, air turbine, air flap, and fault conditions with timestamp
- Device control and logging of actual values on MEMoryCard XL
- Program sequence control for up to 40 ramp segments
- Adjustable air turbine in convection ovens (setting in 10% increments)
- Servo-motor controlled adjustable air flap (setting in 10% increments) for convection or fresh air operation
- Integrated weekly timer with group function (e.g., all working days)
- Retractable push/turn encoder for easy operation
- Visual alarm indicator
- Built-in buzzer for alarm in case of limit violation, as an acoustic signal at program end and confirmation of input (key click)
- Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint tracking monitor (ASF)
- Mechanical temperature limiter (TB safety class 1)
- Monitoring relay for heater shutdown in case of malfunction
- Two separate PT100 temperature sensors, DIN class A, 4-wire configuration for regulation and monitoring
- Convenient integrated 3-point temperature calibration
Lsdpfxoymm Erj Agtjhc
- Temperature-dependent control chamber and door ventilation
- Parallel printer interface (PCL3 compatible)
- Serial RS-232C interface for computer-aided temperature programs and for reading the controller’s internal protocol memory
Technical Data:
- Interior: made of stainless steel, highly stable and easy to clean due to deep-drawn ribbing.
- Housing (exterior body): textured stainless steel, rear panel made of hot-dip galvanized steel sheet.
- UFP 800 mobile and lockable on wheels.
- External dimensions: width 1190 mm, depth 750 mm, height 1620 mm
- Internal dimensions: width 1040 mm, depth 600 mm, height 1200 mm
- Volume approx. 749 liters
- Weight approx. 170 kg
- Power supply: 3N~ 400 V 50/60 Hz
- Power consumption approx. 4800 W, 7A
- Condition: used
- Scope of delivery: (see picture)
(Specifications and details subject to change and errors excepted!)
We are happy to answer further questions by phone.
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2012
Send forespørsel
Telefon & Faks
+49 2861 ... annonser
Disse annonsene kan også være av interesse for deg.
Annonse
Borken
964 km
10°C til +250°C / 749 liter
Memmert Universal - WärmeschrankUFP 800
Memmert Universal - WärmeschrankUFP 800
Annonsen din har blitt slettet
Det har oppstått en feil























