Kjøp brukt Turck Bi40-Cp80-Vp4X2-H1141 (50)

Tilstand: god (brukt), Induktiv sensor - 10–65 VDC, 200 mA - Sn: 40 mm - B5MNH Dsdpfxsb A N Nre Ap Iocl - Antall: 10 stk tilgjengelig - Pris: per stk - Vekt: 0,5 kg

Tilstand: som ny (utstillingsmaskin), Byggeår: 2020, Her tilbyr vi et motstandssveiseanlegg. Anlegget er designet for automatisert motstandssveising av følgende forbindelser: - Housing + QLT - Housing + Heater Service Unit P450 - Welding pump + Flens P 800 Anlegget mates inn og tømmes manuelt av operatør. Annet bruk av anlegget enn det som er beskrevet ovenfor, anses ikke som forskriftsmessig og er således ikke tillatt! Layout av anlegget: - Sveiseenhet - Slaydeenhet - Rengjøringsenhet for sveiseelektrode - Basis - Lineærenhet - Analysemodul DMC Mål (LxB) mm: 1700x1200 Syklustid sek.: ≤ 30–35 Teknisk tilgjengelighet %: ≥ 95 Antall operatører: 1 Spenning V: 400 AC Frekvens Hz: 50 Styrespenning V: 24 DC Forsikring A: 50 Nominell strøm A: ca. 17 Trykkluftforsyning bar: 6 Produksjonsår: 2020 Komponenter i anlegget: - Styreskap - Sikkerhetsinnkapsling - Lineærenhet - Tannremsakse Festo DGE-25-700-ZR-LKRV - Bosch servomotor: MSK030C-0900-NN-M1-UG0-NNNN - Utveksling i=5 - Mating konstant = 63 mm/omdr - Referansebryter: BES 516-324-G-E5-C-S49 - Slaydeenhet - Balluff BES M08EC-PSC15B-S49G - Analysemodul DMC: Keyence SR-1000 - Sveiseenhet - Spindelakse horisontal Dedpfezd Rmgox Ap Iecl - Compact Modul CKK 110-250 uten brems - Bosch servomotor: MSK030C-0900-NN-M1-UG0-NNNN - i=1 - p=5mm - Integrert referansebryter: Hall PNP lukker - Spindelakse vertikal - Compact Modul CKK 110-100 med brems - Bosch servomotor: MSK030C-0900-NN-M1-UG1-NNNN - i=1 - p=5mm - Integrert referansebryter: Hall PNP lukker - Sveisetang - Crede PSZ-K - Styring: ST-T13V2.0 - Effektmodul: LT-L05-T13V13.0 (5 000A) - Vannkjøler: DLK 1002-C - Grensesnitt: ProfiNet - Proporsjonalventilblokk PVB V1.0 - Adapterboks AB V3.0 for SZ og PSZ - Avtrekk - TBH GmbH GL 265 Z - Strømningsvakt - Turck GmbH & Co. KG - FCS-M18-AP8X, Type: BDE11154003 Tilstand: ubrukt, maskinen har aldri vært i produksjon Leveringsomfang: (se bilde) (Endringer og feil i tekniske data forbeholdes!) Ta gjerne kontakt på telefon for ytterligere spørsmål.

Tilstand: god (brukt), Byggeår: 2005, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 107.44.00.072, vandring X-akse: 800 mm, vandring Y-aksen: 650 mm, bevegelsesavstand Z-akse: 500 mm, hurtigmating X-akse: 30 m/min, hurtig tverrslag Y-akse: 30 m/min, hurtigmating Z-akse: 30 m/min, mating X-akse: 15 m/min, matingshastighet Y-akse: 15 m/min, mating Z-akse: 20 m/min, emnevekt (maks.): 500 kg, bordbredde: 600 mm, bordlengde: 600 mm, bordbelastning: 500 kg, totalvekt: 9 900 kg, spindelhastighet (maks.): 20 000 o/min, antall plasser i verktøymagasinet: 30, Utstyr: dokumentasjon / manual, spontransportør, Mikron UCP 800 Duro – 5-akset CNC maskineringssenter Vi tilbyr for salg et presist 5-akset CNC maskineringssenter Mikron UCP 800 Duro fra det anerkjente sveitsiske merket GF Machining Solutions. Maskinen er ideell for bearbeiding av komplekse deler, former, presser og komponenter som krever høyeste nøyaktighet og overflatekvalitet. Dodpfx Apewww Rhs Iscl

Byggeår: 1990, Tilstand: brukt, Funksjonalitet: fullt funksjonell, Vi tilbyr denne brukte BCS COMPUTERS CP 801-x maskinen for stansing av hull langs kanten på folie, beregnet for bruk med plottere. Årsmodell er 1990. Dcedpfxoznt Uno Ap Isl Produsent: BCS COMPUTERS Modell: CP 801-x Årsmodell: 1990 Tilstand: brukt Kategori-ID: 16 Maskintype: Maskin for stansing av hull langs kanten på folie for plottere CP801-x gir alltid et perfekt resultat Unøyaktigheter ved stansing kan føre til alvorlige problemer for produktet ditt. Plotteren fungerer ikke lenger som den skal, noe som fører til uønskede problemer … Stansemaskinen CP801-x løser dette problemet! Denne stansemaskinen garanterer høyest mulig nøyaktighet og skarpe hullkanter. Dette sikrer at produktet behandles nøyaktig i henhold til de oppgitte dataene i CAD/CAM-plotteren. CP801-x produserer ti forskjellige hullmønstre med en maksimal diameter på opptil 6 mm. Ved hjelp av de samme verktøyene kan du også stanse lange hull i lengden på rullene. Det ønskede mønsteret kan enkelt justeres ved hjelp av en enkel fingerbevegelse. CP801-x utfører dette på et øyeblikk! Stansemaskinen CP801-x tilbyr mange fordeler. For eksempel er den maksimale lengdetoleransen bare 0,2 %. Og vi må ikke glemme den variable breddejusteringen. I tillegg er den utstyrt med automatisk lengdejustering. En annen viktig fordel er den raske avskrivningstiden for maskinen, takket være den høye stanskapasiteten: opptil 300 m/time. Intelligent programvare gjør maskinen spesielt brukervennlig. Det svært enkle og lett tilgjengelige kontrollpanelet krever bare grunnleggende kunnskaper. Hvis du har spørsmål eller trenger mer informasjon, kan du gjerne sende oss en melding eller ringe oss.

Tilstand: brukt, Grensesignalgiver, logikkontroller, utløserpunktstyring, multisafe koblingsforsterker, nivåvakt - Produsent: Turck, multi safe grensesignalgiver Ovp - Type: MS43-12-R Dcodpelfig Uofx Ap Ijl - Antall: 3x moduler tilgjengelig - Pris: per stk. - Kartongmål: 130/60 (H80) mm - Vekt: 0,3 kg/stk.

Tilstand: brukt, Måletransformator, effektmåletransformator, aktiv effektmåletransformator, analogomformer, frekvens-til-analog-omformer, frekvensdeler, galvanisk skilleomformer, signalomformer, skilletransformator, bryterforsterker - Produsent: Turck, multi safe bryterforsterker Switching Amplifier Ovp - Type: MS13-22ExO-T Dcjdpfolfihcjx Ap Iel - Kartongdimensjoner: 130/60/H80 mm - Vekt: 0,4 kg

Tilstand: brukt, Grensesignalomformer, logikkontroller, utløserpunktstyring, Multisafe koblingsforsterker, nivåvakt - Produsent: Turck, multisafe grensesignalomformer Ovp - Type: MS91-12-R - Antall: 1x modul tilgjengelig - Pris: per stykk - Kartongmål: 130/60(H80) mm - Vekt: 0,4 kg/stk. Dcsdpfx Apslfihre Iol

Tilstand: ny,

Tilstand: ny,

Tilstand: god (brukt), Sensor, skrivehode, lesehode, skrive-/lesehode - Produsent: Turck Blident, skrive-/lesehode Dodpegpri Tjfx Ap Ijcl - Type: TNLR-Q80L400-H1147 - Spenning: 24 VDC - Mål: 415/80/H25 mm - Vekt: 1,1 kg

Tilstand: brukt, Byggeår: 2000, 2 x fresemaskin Mikron VCP 800, modellår 1999 og 2000. Dsdpfx Apjzu Ivaj Iocl

Tilstand: klar til bruk (brukt), Byggeår: 2018, driftstimer: 4 231 h, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 107.44.00.407, vandring X-akse: 800 mm, vandring Y-aksen: 650 mm, bevegelsesavstand Z-akse: 500 mm, kontrollermodell: Heidenhain iTNC 530, totalvekt: 11 000 kg, TEKNISKE DETALJER Bevegelsesområde X-akse: 800 mm Bevegelsesområde Y-akse: 650 mm Bevegelsesområde Z-akse: 500 mm C-akse svingområde: 360° Dcsdpfxszf E I Io Ap Ijl Verktøyholder: HSK-E63 MASKINDETALJER Styring: Heidenhain iTNC 530 Spindeltyper: NCD 150 PL, NCD 200 PL Driftstimer Kontroll PÅ: 30 064 t Driftstimer Maskin PÅ: 10 322 t Driftstimer Programutførelse: 4 159 t Driftstimer Drivenheter PÅ: 7 331 t Driftstimer Spindel PÅ: 4 231 t Mål & Vekt Mål (L x B x H): 3 400 x 3 000 x 2 800 mm Totalvekt: 11 000 kg UTSTYR Spontransportør Kjølevæskeanlegg med filtersystem Dokumentasjon tilgjengelig

Tilstand: god (brukt), Byggeår: 2006, vandring X-akse: 800 mm, vandring Y-aksen: 650 mm, bevegelsesavstand Z-akse: 500 mm, mating X-akse: 30 000 m/min, matingshastighet Y-akse: 30 000 m/min, mating Z-akse: 30 000 m/min, kontrollerprodusent: HeidenHain iTNC530, total høyde: 3 200 mm, total lengde: 3 200 mm, total bredde: 2 400 mm, bordbredde: 600 mm, bordlengde: 600 mm, bordbelastning: 500 kg, totalvekt: 10 000 kg, spindelhastighet (maks.): 20 000 o/min, spindelmotoreffekt: 18 000 W, 5-akse maskineringssenter MIKRON - UCP 800 MACH-ID 9640 Produsent: MIKRON Modell: UCP 800 Styring: HeidenHain iTNC530 X-akse: 800 mm Y-akse: 650 mm Z-akse: 500 mm A-akse: +120 til -100° B-akse: 360.000° Bordlengde: 600 mm Bordbredde: 600 mm Bordbelastning: 500 kg Matehastighet X-akse: 30.000 mm/min Matehastighet Y-akse: 30.000 mm/min Matehastighet Z-akse: 30.000 mm/min Verktøyholder: HSK63ISO/Bt/Mk Spindeleffekt: 18 kW Spindelhastighet: 20.000 o/min Verktøyskifter: 30 IKZ (innvendig kjøling gjennom verktøy): 20 bar Antall styrte akser: 5 Spontransportør: ja Kjøleanlegg: ja Lengde: 3.200 mm Bredde: 2.400 mm Høyde: 3.200 mm Vekt: 10.000 kg Vennligst merk: Informasjonen på denne siden er hentet etter beste evne fra oss og, så langt det er mulig, fra produsenten. Informasjonen gis i god tro, men nøyaktighet kan ikke garanteres. Dette utgjør derfor ikke noen representasjon eller kontraktsvilkår. Vi anbefaler at du kontrollerer alle viktige detaljer. Dcsdpfx Apjzkry Ie Iol

Tilstand: ny, Byggeår: 2019, maskin-/kjøretøynummer: DF0369, pressekraft: 220 t, Rettetangspresse – Produsent Calende – 220 t dobbeltstativpresse – Bord 2.000 × 600 mm Til salgs er en kraftig rettetangspresse fra Calende i dobbeltstativutførelse med en presskraft på 220 t. Maskinen har stor arbeidsbredde på 1.500 mm, solid konstruksjon samt moderne styringsteknologi, og egner seg utmerket til retting, bøying og omforming i industriell produksjon. ==== Tekniske data + informasjon: Rettetangspresse Calende – 220 t dobbeltstativpresse ==== Generelle opplysninger - Produsent: Calende - Modell: Rettetangspresse - Utførelse: Dobbeltstativpresse - Presskraft: 220 t - Maskinvekt: ca. 5,2 t - Dimensjoner (L × B × H): ca. 4.000 × 1.950 × 2.900 mm ==== Arbeidsområde - Fri passasjebredde: 1.500 mm - Slaglengde: 400 mm - Maks. arbeidshøyde: 500 mm - Bordhøyde: ca. 900 mm ==== Bord og stempleplate - Bordstørrelse: 2.000 × 600 mm - Stempleplate: 2.000 × 400 mm ==== Krefter - Tilbakedragerkraft: 20 t ==== Hastigheter - Fremføringshastighet: opp til 10 mm/s - Arbeidshastighet: 10 mm/s - Tilbakeretningshastighet: 25 mm/s - Hurtiggang: 10 mm/s Dcodjfxyivepfx Ap Isl ==== Hydraulikk - Totalt effektbehov: 30 kW - Oljetankvolum: 500 l - Elektrisk oljekjøling: maks. 1,5 kW ==== Styring og måleteknikk - Posisjonsmålesystem: Turck eller Balluff - Styring: Siemens S7-1500 eller Pilz PSS 4000 - Monitor: Siemens eller Omron ===== Retting, bøying, omforming, metallbearbeiding, vedlikehold, serieproduksjon, komponentkorrigering Rettetangspresse, dobbeltstativpresse, hydraulisk presse, bøyepresse, omformingspresse, industripresse Leter du etter en hydraulisk presse tilpasset ditt behov? Ta kontakt for et individuelt tilbud. Våre hydrauliske presser produseres etter tyske maskindirektiver samt europeiske maskindirektiver (Direktiv 2006/42/EF), EC-standarder og EU-sikkerhetsbestemmelser. Våre presser overgår også de kanadiske og europeiske sikkerhetskravene, ettersom de oppfyller alle punkter i den nasjonale brasilianske sikkerhetsstandarden NR 12, som bygger på disse. Vår store styrke er spesialmaskinbygging og automatisering av presser. Vi leverer skreddersydde hydrauliske presser til overraskende gunstige priser. For hydraulikken i pressene benyttes fortrinnsvis komponenter fra ledende europeiske produsenter.

Tilstand: god (brukt), Induktiv sensor -10-65 VDC 200 mA Dcjdpfeb A N Nqsx Ap Isl -Avstand (Sn): 100 mm -Antall: 5 stk tilgjengelig -Pris: per stk -Vekt: 1 kg

Tilstand: klar til bruk (brukt), Byggeår: 2004, vandring X-akse: 800 mm, vandring Y-aksen: 650 mm, bevegelsesavstand Z-akse: 500 mm, kontrollerprodusent: HEIDENHAIN, kontrollermodell: iTNC 530, totalvekt: 9 100 kg, spindelhastighet (maks.): 20 000 o/min, spindelmotoreffekt: 12 000 W, antall aksler: 3, Denne 3-aksede MIKRON VCP 800W Duro ble produsert i 2003. Den er utstyrt med en Heidenhain iTNC 530-styring og har X-, Y- og Z-aksevandringer på henholdsvis 800 mm, 650 mm og 500 mm. Maskinen har en høythastighetsspindel med 20.000 o/min og et verktøymagasin med 30 plasser. Dette vertikale bearbetingssenteret MIKRON VCP 800W Duro er ideelt for presisjonsmaskinering. Kontakt oss for mer informasjon om denne maskinen. • Verktøygrensesnitt: HSK-A63 Dcjdpfxeyglh Es Ap Iol • Verktøymagasin: 30 posisjoner Ekstra utstyr • Spontransportør • Komplett sett med verktøyholdere og verktøy (som vist på bildene) • BILZ ThermoGrip krympesystem med CoolDown (induksjonsapparat for montering/demontering av verktøy i krympeholdere; produsent: BILZ)

Tilstand: ny, Byggeår: 2025, pressekraft: 1 000 t, slagslengde: 1 000 mm, bordbredde: 1 500 mm, bordlengde: 2 000 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHP 1000 H-Type Single-Acting Hydraulic Press – 8-Guided General Description CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for sheet metal forming, deep drawing, straightening, and heavy-duty pressing applications that require high tonnage. The 8-guided H-frame structure provides maximum rigidity, precision, and long service life by evenly distributing the high forces generated during pressing. The CHP 1000 model is engineered to deliver reliable and stable performance for heavy industry production lines. CHP Series – Structural Features CHP series presses are engineered for demanding industrial environments. The frame and main load-bearing structures are stress-relieved by vibration. Thanks to bronze Zr14 slideway bushings, uniform load distribution and high precision are achieved throughout the ram movement. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 slideways - Vibration stress-relieved body structure - Bronze Zr14 slideway bushings - WPQR & WPS welding procedures certified by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing conforming to CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control Dcodpfx Asx N T Rbjp Isl - Automatic lubrication system - Electronically monitored filter contamination alert - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER control components 📐 Technical Specifications – CHP 1000 Type: Steel construction, H-frame press with 8 slideways Frame Material: St52 – ERDEMİR Slideway Bushing: Bronze Zr14 Capacity (Ram): 1000 Ton Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Ram Stroke: 1000 mm Min. Die Space: 100 mm Max. Die Space: 1100 mm Weld Stress Relief: Vibration stress relief Welding Procedure: WPQR and WPS certified by TÜRK-AK according to EN ISO 15614-1/2017 Max. Operating Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Descent: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø500 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6000 mm Approx. Press Width: 3450 mm Approx. Press Depth: 2400 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Controller: DELTA Touch Panel Display: DELTA 7” Control Components: SIEMENS – SCHNEIDER Approximate Weight: 55 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 150 t, slagslengde: 500 mm, bordbredde: 800 mm, bordlengde: 1 000 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8 Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial, rigid steel frame presses designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-slide H-frame structure, it ensures stable, balanced, and repeatable operation during pressing. The CHP 150 model has been developed to deliver reliable performance and long service life for medium-tonnage applications. CHP Series – Structural Features CHP series presses are engineered for heavy-duty operations. The frame and supporting components are stress-relieved using a vibration process. Bronze Zr14 slide bearings provide smooth load transfer and long-term stable operation. ⚙️ Standard Equipment • Steel construction, H-frame press body with 8 slide guides • Stress-relieved frame and supporting parts by vibration • Bronze Zr14 slide bearings • WPQR & WPS certified welding, approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • Machine design and manufacture in compliance with CE standards • PLC-controlled hydraulic system • 7" DELTA touchscreen panel display • Adjustable ram stroke and tonnage control • Automatic lubrication system • Electronic filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Cooling system • Off-line filtration • Dual-hand control system • Light curtain (operator safety standard) • SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 150 • Type: Steel construction, H-frame press body with 8 slide guides • Frame Material: St52 – ERDEMIR • Slide Guides: Bronze Zr14 • Capacity (Ram): 150 Tons • Movable Table Size: 800 × 1000 mm • Fixed Table Size: 800 × 1000 mm • Parallelism Tolerance: 120 microns/m • Perpendicularity Tolerance: 60 microns/m • Stroke (Ram): 500 mm • Min. Daylight: 100 mm • Max. Daylight: 600 mm • Post-Weld Stress Relief: Vibration method • Welding: WPQR & WPS accredited by TÜRK-AK, EN ISO 15614-1:2017 (supervised by weld coordination engineers certified to EN ISO 14731) • Max. Working Pressure: 250 Bar • Total Motor Power: 18.5 kW – IE3 • Main Pump: 32 cm³ – REXROTH or PARKER • Movable Table Fast Down Speed: 150 mm/sec • Movable Table Pressing Speed: 12 mm/sec • Movable Table Return Speed: 170 mm/sec • Main Cylinder Internal Diameter: Ø280 mm – Ck45 • Approx. Press Height: 3650 mm • Approx. Press Width: 2950 mm • Approx. Press Depth: 2000 mm • Distance from Floor to Lower Table: 1250 mm • Pre-fill Valve: NG 100 • Hydraulic Unit: REXROTH or PARKER • Cooling System: EMMEGI – CIESSE – PARKER • Off-line Filtration: REXROTH or PARKER • Linear Position Transducer: NOVATECHNIK or TURCK • PLC: DELTA • Touchscreen Panel: DELTA 7" • Switchgear: SIEMENS – SCHNEIDER • Approximate Weight: 7 Tons Production Note Dsdpfox N T Dzex Ap Iecl This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 800 t, slagslengde: 800 mm, bordbredde: 1 500 mm, bordlengde: 2 000 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHP 800 H-Type Single Acting Hydraulic Press – 8-Guide General Description The CRONOSSTECH CHP series H-type single acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-guide H-frame construction ensures maximum rigidity and long service life by evenly distributing the high forces generated during pressing. The CHP 800 model has been developed to deliver reliable and stable performance for high-capacity production lines. CHP Series – Structural Features The CHP series presses are engineered with heavy industry conditions in mind. The frame and main carrier components have been stress-relieved by vibration. Bronze Zr14 guide bushings ensure smooth load distribution and precise operation throughout the ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Vibration stress-relieved frame structure - Bronze Zr14 guide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in compliance with CE standards - PLC-controlled hydraulic system - DELTA 7” touchscreen panel display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronically monitored filter contamination warning - Real-time display of hydraulic unit oil temperature and system status on screen - Cooling system - Off-line filtration - Two-hand control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 800 Type: Steel construction, 8-guide H-frame press type Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 800 Ton Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/mtr. Perpendicularity Tolerance: 60 micron/mtr. Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Vibratory stress relief Welding Application: WPQR & WPS certified welding, accredited by TÜRK-AK according to EN ISO 15614-1:2017 (supervised by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/s Moving Table Forming Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø390 mm – Ck45 (2 units) Auxiliary Rapid Advance Cylinders: 2 units Approximate Press Height: 6000 mm Approximate Press Width: 3350 mm Approximate Press Depth: 2700 mm Dedpfx Aox N T Nkop Iocl Lower Table Height from Floor: 1450 mm Main Pre-fill Valve: NG 200 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC System: DELTA Touchscreen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 45 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 1 200 t, slagslengde: 1 000 mm, bordbredde: 1 500 mm, bordlengde: 2 000 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, RONOSSTECH CHP 1200 H-Type Hydraulic Deep Drawing Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are specially designed for deep drawing, forming, shaping, and heavy-duty pressing applications. Thanks to its 8 guided slide H-frame structure, it ensures maximum rigidity, stability, and precision under high tonnage. The CHP 1200 model delivers reliable and long-lasting performance for industrial production lines requiring high force. The frame construction is stress relieved by vibration, ensuring equal distribution of loads generated during pressing, while maintaining parallelism and perpendicularity tolerances. ⚙️ Standard Equipment Steel construction, 8-guideway H-frame press body Vibration stress-relieved frame structure Bronze Zr14 slide bearings WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) Design and manufacturing in compliance with CE standards PLC-controlled hydraulic system Touchscreen panel (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronic filter contamination alert Monitoring of hydraulic unit oil temperature and system status on screen Cooling system Off-line filtration Safety systems for operator protection SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 1200 Type: Steel construction, 8-guideway H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 1200 Tons Moving Table Dimensions: 1500 × 2000 mm Fixed Table Dimensions: 1500 × 2000 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight Opening: 100 mm Max. Daylight Opening: 1100 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017 compliant welding certificate Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø560 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6100 mm Approx. Press Width: 3550 mm Approx. Press Depth: 2400 mm Lower Table Height from Floor: 1450 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Gauge: NOVATECHNIK or TURCK PLC Application: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 60 Tons Dedpfx Aex N T Ruop Iocl Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 1 500 t, slagslengde: 1 000 mm, bordbredde: 1 500 mm, bordlengde: 2 400 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHP 1500 H-Type Hydraulic Deep Drawing Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic deep drawing presses are designed for deep drawing, forming, and heavy-duty shaping applications that require high tonnage. The 8-slide H-frame structure provides maximum rigidity and stability during pressing, ensuring the maintenance of parallelism and perpendicularity tolerances. The CHP 1500 model offers a reliable solution for the automotive, defense, heavy metal forming, and industrial production lines, with its large table dimensions, robust hydraulic system, and high stroke capacity. The frame is stress-relieved by vibration to ensure long life and stable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Body stress relieved by vibration - Bronze Zr14 slide bearings - WPQR and WPS welding applications approved by TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production in accordance with CE standards - PLC-controlled hydraulic system - 7” DELTA touchscreen panel display - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 1500 - Type: Steel construction, 8-guided H-frame press body - Frame Material: St52 – ERDEMİR - Slide Bearings: Bronze Zr14 - Capacity (Ram): 1500 Tons - Moving Table Dimensions: 1500 × 2400 mm - Fixed Table Dimensions: 1500 × 2400 mm - Parallelism Tolerance: 120 micron/meter Dedpfx Apsx N T R Ue Iscl - Perpendicularity Tolerance: 60 micron/meter - Ram Stroke: 1000 mm - Minimum Daylight: 200 mm - Maximum Daylight: 1200 mm - Stress Relief: Vibration stress relief - Welding Application: Certified welding application EN ISO 15614-1/2017, accredited by TÜRK-AK with WPQR and WPS approval - Maximum Operating Pressure: 250 Bar - Total Motor Power: 90 kW – IE3 - Main Pump: 101 cm³ – REXROTH or PARKER - Moving Table Fast Descent Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø620 mm – Ck45 (2 units) - Auxiliary Fast Approach Cylinders: 2 units - Approximate Press Height: 6250 mm - Approximate Press Width: 3750 mm - Approximate Press Depth: 2500 mm - Lower Table Height from Floor: 1500 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Distance Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Panel Display: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 70 Tons Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Tilstand: ny, Byggeår: 2025, pressekraft: 100 t, slagslengde: 500 mm, bordbredde: 800 mm, bordlengde: 1 000 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHP 100 H-Type Single-Acting Hydraulic Press – 8-Guideway General Description Dedpfxsx N Tx Sj Ap Iscl The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial machines with a rigid steel construction, designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guideway H-frame structure, they ensure high stability and repeatable precision during pressing operations. CHP Series – Structural Features The CHP series presses are engineered with heavy-duty applications in mind. The frame and supporting parts are stress-relieved by vibration. The bronze Zr14 material used for guideway bushings ensures durable and stable operation over time. Key Advantages - 8-guideway H-frame design - Vibration stress-relieved steel construction - Welded components in accordance with ISO standards - PLC control with touchscreen operation - Design focused on operator safety and process stability ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guideways - Stress-relieved frame and supporting components (vibration method) - Bronze Zr14 guideway bushings - TÜRK-AK accredited WPQR & WPS certified welding (EN ISO 15614-1:2017 / EN ISO 14731) - Machine structure designed and manufactured in accordance with CE standards - PLC controlled hydraulic system - 7” DELTA touchscreen panel - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning system - On-screen monitoring of hydraulic unit oil temperature and system status - Cooling system and off-line filtration - Two-hand operation system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 100 Type: Steel construction, 8-guideway H-frame press design Frame Material: St52 – ERDEMİR Guideway Bushings: Bronze Zr14 Capacity (Ram): 100 Ton Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Stroke (Ram): 500 mm Min. Clearance: 100 mm Max. Clearance: 600 mm Stress Relief: Vibration method Welding Certification: WPQR and WPS certified by TÜRK-AK, per EN ISO 15614-1/2017 (monitored by certified welding coordination engineers in accordance with EN ISO 14731) Maximum Working Pressure: 250 Bar Total Motor Power: 11 kW – IE3 Main Pump: 22 cm³ – REXROTH or PARKER Fast Descent Speed (Moving Table): 150 mm/s Pressing Speed (Moving Table): 12 mm/s Return Speed (Moving Table): 170 mm/s Main Cylinder Inner Diameter: Ø230 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Height: 3400 mm Approximate Width: 2950 mm Approximate Depth: 2000 mm Distance from Floor to Lower Table: 1250 mm Pre-fill Valve: NG 100 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Scale: NOVATECHNIK or TURCK PLC: DELTA Touchscreen Panel: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 6.5 Ton Production Note This machine is manufactured in Turkey by CRONOSSTECH.

Tilstand: ny, Byggeår: 2025, pressekraft: 600 t, slagslengde: 800 mm, bordbredde: 1 200 mm, bordlengde: 1 500 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHP 600 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP Series H-type single-acting hydraulic presses are high-rigidity industrial machines developed for sheet metal forming, straightening, assembly, and heavy-duty pressing applications. The 8-guided H-frame structure ensures balanced distribution of high forces generated during pressing, offering long-lasting and stable operation. The CHP 600 model is designed to deliver reliable performance for production processes requiring high tonnage. CHP Series – Structural Features CHP series presses are engineered with heavy-duty conditions in mind. The frame and supporting components are stress-relieved via vibration methods. Bronze Zr14 slideway bearings ensure even load distribution and high precision throughout ram movement. ⚙️ Standard Equipment - Steel construction, H-type press frame with 8 guided slides - Frame structure stress-relieved by vibration - Bronze Zr14 slideway bearings - Welding applications approved by WPQR & WPS with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Real-time monitoring of hydraulic unit oil temperature and system status on the display - Cooling system - Off-line filtration - Dual-hand control system - Light barrier (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 600 Type: Steel construction, 8-slideway H-frame press Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Dedsx N T Iaopfx Ap Ijcl Capacity (Ram): 600 Ton Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Stress Relieving: Vibrational stress relief Welding Application: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1/2017 certified welding application (monitored by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 55 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/s Moving Table Drawing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø550 mm – Ck45 Pot Cylinder Bore: Ø320 mm – Ck45 Auxiliary Acceleration Cylinders: 2 pcs Approximate Height of Press: 5900 mm Approximate Width of Press: 3250 mm Approximate Depth of Press: 2300 mm Lower Table Height from Ground: 1400 mm Pre-fill Valve: NG 150 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Measurement Scale: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 28 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 2 000 t, slagslengde: 1 000 mm, bordbredde: 1 500 mm, bordlengde: 2 500 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type hydraulic presses are designed for heavy forming, deep drawing, spinning, and die applications that require very high tonnage. Thanks to its 8-guided H-frame structure, maximum rigidity is achieved during pressing, and parallelism and perpendicularity tolerances are maintained along the full stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and powerful motor structure, is a reliable and long-lasting solution for automotive, defense industry, heavy industry, and high-tonnage production lines. The body structure is stress-relieved by vibration to ensure stable operation. ⚙️ Standard Equipment - Steel construction, 8-guided H-frame press body - Vibration-stress-relieved body structure - Bronze Zr14 slide bearing - WPQR and WPS certified welding applications, accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel screen (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via display - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switchgear 📐 Technical Specifications – CHP 2000 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slide Bearing: Bronze Zr14 Capacity (Ram): 2000 Tons Moving Table Dimensions: 1500 × 2500 mm Fixed Table Dimensions: 1500 × 2500 mm Parallelism Tolerance: 120 micron/meter Perpendicularity Tolerance: 60 micron/meter Stroke (Ram): 1000 mm Min. Daylight: 200 mm Dcedpfx Apjx N T Srj Iel Max. Daylight: 1200 mm Weld Stress Relief: Vibration stress relief Welding Application: WPQR and WPS certified, accredited by TÜRK-AK to EN ISO 15614-1/2017 Max. Working Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Moving Table Fast Descent Speed: 150 mm/sec Moving Table Spinning Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø720 mm – Ck45 (2 units) Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 6300 mm Approx. Press Width: 3850 mm Approx. Press Depth: 2500 mm Lower Table Height from Floor: 1500 mm Pre-fill Valve: NG 200 Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Transducer: NOVATECHNIK or TURCK PLC Application: DELTA Touch Panel Screen: DELTA 7” Switchgear: SIEMENS – SCHNEIDER Approximate Weight: 95 Tons Manufacturing Note This machine is manufactured by CRONOSSTECH in Turkey.

Tilstand: ny, Byggeår: 2025, pressekraft: 200 t, slagslengde: 600 mm, bordbredde: 800 mm, bordlengde: 1 000 mm, driftstrykk: 250 stang, Utstyr: dokumentasjon / manual, sikkerhetslysbarriere, CRONOSSTECH CHP 200 H-Type Single-Acting Hydraulic Press – 8 Gibs General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial solutions developed for sheet metal forming, straightening, assembly, and die pressing applications, designed for high rigidity. Thanks to their 8-gib H-frame structure, loads generated during pressing are distributed evenly, ensuring stable and repeatable operation. The CHP 200 model is designed for applications requiring medium-to-high tonnage, prioritizing reliable performance and long service life. CHP Series – Structural Features CHP series presses are engineered for heavy-duty conditions. The frame and main components are stress-relieved via vibration. Bronze Zr14 gibs ensure smooth ram movement and sustained precision over time. ⚙️ Standard Equipment - Steel construction, 8-gib H-type press frame - Frame and support components stress-relieved by vibration - Bronze Zr14 gib bushings - WPQR & WPS certified welding (TÜRK-AK accredited), EN ISO 15614-1:2017 / EN ISO 14731 - Frame designed and manufactured in compliance with CE standards - PLC controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination alert - On-screen monitoring of hydraulic oil temperature and system status - Cooling system - Off-line filtration - Two-hand control system - Light barrier (standard for operator safety) - SIEMENS / SCHNEIDER switchgear 📐 Technical Specifications – CHP 200 - Type: Steel construction, 8-gib H-frame press - Frame Material: St52 – ERDEMİR Dsdpfx Apex N T D Us Ijcl - Gib Bushings: Bronze Zr14 - Capacity (Ram): 200 tons - Moving Table Size: 800 × 1000 mm - Fixed Table Size: 800 × 1000 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 600 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Stress Relief: Vibration stress relief - Welding: TÜRK-AK WPQR & WPS certified to EN ISO 15614-1/2017 (Supervised by certified welding coordination engineers as per EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 22 kW – IE3 - Main Pump: 32 cm³ – REXROTH or PARKER - Moving Table Fast Down Speed: 150 mm/sec - Moving Table Drawing Speed: 12 mm/sec - Moving Table Return Speed: 170 mm/sec - Main Cylinder Bore: Ø320 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approx. Machine Height: 3800 mm - Approx. Machine Width: 2950 mm - Approx. Machine Depth: 2200 mm - Lower Table Height From Floor: 1350 mm - Pre-fill Valve: NG 125 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Sensor: NOVATECHNIK or TURCK - PLC: DELTA - Touchscreen Panel: DELTA 7” - Switchgear: SIEMENS – SCHNEIDER - Approximate Weight: 8 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.