Kjøp brukt Rondo Sheeter (310)

Byggeår: 2026, Tilstand: som ny (utstillingsmaskin), Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: S25Synthesi01, Stretch wrapper Synthesi TECHNICAL DETAILS Turntable / Base frame / Ø 2,200 mm Max. pallet size: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set to 200% Film application tension electronically adjustable in the programs, in several steps Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start - start/stop) Frequency-controlled carriage up/down speed Buzzer at wrap start and cycle end stop Emergency stop switch according to CE regulations Turntable always stops in the same home position Fall protection for the film carriage Push button for machine power-on as well as start, stop & reset function, according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS AT CONTROL PANEL All function parameters adjustable via display F00 – Display lock for program changes F02 – Stepless turntable speed adjustment 5–12 rpm Carriage speed upwards and downwards independently adjustable F03 – Carriage speed upwards from 1.3 to 5.4 m/min F04 – Carriage speed downwards from 1.3 to 5.4 m/min F05 – Number of wraps at pallet base (1–10 rotations) F06 – Number of wraps at pallet top (1–10 rotations) F09 – Photoelectric sensor delay for wrapping height F13–F16 – Film tension for base & top wraps / up & down movement independently adjustable F62 – Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS AT CONTROL PANEL 6 storable wrapping programs F01-1 – Cross-wrap (upwards/downwards) F01-2 – Simple wrap (upwards or downwards only) F01-3 – Push button for manual functions F10–F11 – Wrapping cycle with specified start and stop height F12 – Wrapping to a preset height (with deactivation of the photoelectric sensor) Pedpeykub Asfx Al Degt F22/F23 – Wrapping cycle for top sheet film F29 – Soft start cycle for corner protection placement F30–F31 – Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via push button Optional features available: Turntable size up to Ø2600 mm Mast height up to 3900 mm Ramp Mounting frame Photoelectric sensor for black products Cutting device, etc. Additional units available from Ludwigsburg stock. Images may show options subject to a surcharge. Picture similar

Tilstand: ny, Byggeår: 2026, SERVICE CENTER HALVER FOR KANTBENDING TECHNOLOGY. Your competent partner for bending machines. We are your point of contact for high-quality sheet metal processing throughout Germany. As a long-standing distributor of the Polish manufacturer PROD-MASZ, we respond directly to the needs of our customers on site and see ourselves as an extension of the production facility. Relevant machines can be demonstrated if required, along with expert consultation and professional instruction. Psdpfozuvayox Al Djgt We offer tailored advice in line with your requirements and look forward to your enquiry. Bending machine RED2200/0.8 on transport castors with 60mm/45° cut-out from Prod-Masz available for testing on site and immediate collection. Technical specifications: - Working width: 2140 mm - Steel sheet thickness up to 0.8 mm - 30% higher sheet thickness for non-ferrous metals - Bending angle up to 145° - Bending beam: 15 mm - Passage: 80 mm - Degree scale - Adjustable stop for preset bending angles - Sheet metal tray - Front depth stop - Weight: approx. 250 kg Other sizes (1000, 1440, 2140, 2640, 3140, 3640, 4140 mm) available on request All prices are subject to 19% VAT. CE certificate Warranty: 12 months Collection possible Accessories: rotary shear €350 Shipping within Germany €180

Tilstand: brukt, Byggeår: 2006, HORIZON VAC-60Ha / Hm / Hc Collating Towers The HORIZON VAC-60 series (Ha, Hm, Hc) are modular collating towers designed for professional print finishing – precise, fast, and reliable paper handling. Key Features: Modular System: Each tower features 6 feeding stations; expandable up to 6 towers (36 stations total). Advanced Suction-Air Technology: Ensures reliable sheet feeding with various formats and grammages. Flexible Format Range: Handles sheets from approx. 120 × 148 mm up to 500 × 350 mm, at 40–300 g/m². High Productivity: Up to 9,500–10,000 sets per hour, depending on format and configuration. User-Friendly: Ha and Hc models feature "Touch & Work" technology for simple setup and operation. Easy System Expansion: The Hm model integrates as an additional module without its own control panel. Fault Monitoring: Sensors for miss-feed, double-feed, and jam detection ensure high process reliability. Job Memory: Up to 9 memory slots for recurring jobs. Technical Data: Dimensions: approx. 842 × 652 × 1,961 mm Weight: approx. 310–315 kg Power supply: 230V, 50/60Hz, 1.86 kW Stack height: 130 mm per station All-in-One Service Package We take care of everything: secure packaging, transport, and customs clearance. On request, we can also provide you with a tailor-made leasing offer. Pedpfx Ajylkw Ael Dsgt Sustainable and Cost-Effective Choose a pre-owned machine and benefit twice: protect the environment and your budget. Despite minor signs of use, you receive a quality product at an attractive price.

Tilstand: klar til bruk (brukt), Byggeår: 2003, Sheet width: 2520 mm Sheet thickness: 2.50 mm (mild steel) Sheet thickness (stainless steel): 1.50 mm Upper beam adjustment: 160 mm Adjustment speed: 100 mm/sec Bending beam adjustment: 80.0 mm Pgsdpexbh Euofx Al Dot Bending speed: approx. 120°/sec Compressed air: 6.0 bar Working height: 869 mm Control: POS 2000 Total power requirement: 7.2 kW Voltage: 400 V Weight: 3430 kg Current new price: ~ €100,000 From a maintenance workshop With very good equipment (!!) Features: - CNC electro-motorized universal folding machine * High-precision mechanics with advanced control technology * Suitable for single-part and series production * Robust high-speed model with rapid axis movements * Distortion-free welded construction - Rotatable upper beam / automatic tool change system * With 2x tool stations (sharp and segmented goose-neck bending rails) * Reduces setup and idle times * Avoids time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * Control panel front right (operable with PC mouse) * Color display * USB interface * Automatic cut calculation * Material and tool library * Precision bending simulation * Operating system Windows XP * Swivel-mounted control, front right - Servo inverter-controlled drives * For bending/upper beam & electric back gauge - CNC motorized lower beam adjustment - CNC electro-motorized back gauge * Travel speed 300 mm/sec - With rear sheet support table, including ball rollers - 1x mobile double foot switch - Operating manual (PDF)

Tilstand: brukt, Byggeår: 2017, Transnorm Belt Curve Conveyor 45° Left 670-500 IR1100 RA1083 The Transnorm belt curve is from 2017. It is in like-new condition (used) and fully functional. It is equipped with a motor from SEW. Supports are not included in the scope of delivery but are optionally available. Belt curves are widely used in intralogistics for in-house transport of unit loads and are an essential part of modern distribution centers. Transnorm belt curves stand out for their performance and reliability. Thanks to a low-tension drive system across the entire belt width, long operating times are not an issue. Tapered rollers and a specially developed belt guiding system ensure maximum running smoothness. Technical specifications: Manufacturer: Transnorm Type: TS 1600-105 FH2 Belt Curve 45° Left Year of manufacture: 2017 Condition: like new (used) Motor: fully functional Angle: 45° Direction of travel: left Inner radius (IR): 1100 mm Nominal/outer width (NB): 670 mm Pjdpfek Aa Dtjx Al Dsgt Usable width (NUB): 500 mm Side guide: external sheet steel Drive: SEW geared motor Drive position: outer, pulling Weight: 120 kg Scope of delivery: without supports (please inquire if required) Optional: supports Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional consulting, simply get in touch with us. Contact us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Tilstand: svært god (brukt), Plate width: 1270 mm Sheet thickness: 1.75 mm (steel) Sheet thickness: 2.00 mm (aluminium) Sheet thickness: 2.50 mm (plastic) Sheet thickness (stainless steel): 0.80 mm Stand width: 1300 mm Opening width: approx. 380 mm Working height: 900 mm Lower beam adjustment: 60.0 mm Max. bending angle: 180 ° Weight: approx. 200 kg Dimensions (L x W x H): 2000 x 520 x 1500 mm Condition: good (!!) Bending rail, e.g. newly ground Pjdpfoxaa S Dex Al Dogt Equipment: - Sturdy manual folding bending machine - Manual lifting mechanism via hand lever (incl. gas pressure damper) - Manual clamping of the upper beam via side handwheel - Manual adjustment of the lower beam - Fixed stop for bending angle with analogue angle indicator - Upper beam with wide opening - Operating manual / documentation * Machine link: ?machineno=1008-9355182

Tilstand: svært god (brukt), TIRA Type: TCZ 4022 S -2K Description: Climate Simulation Chamber, Air-Cooled System Configuration: The system consists of the following main components: - Walk-in, insulated chamber - Air treatment room - Humidification system - Machinery room - Control cabinet Technical Data: Performance Range for Temperature Testing: - Temperature range: -40...+140°C - Temperature stability, supply air (over time): ≤ ± 0.5°C (without thermal test room load, according to DIN 50011 T13 / EN 60068) - Temperature stability, supply air (spatial): ≤ ± 1.0°C (without thermal test room load, according to DIN 50011 / EN 60068) - Heating rate (according to DIN 50011): approx. 2.0 K/min (without thermal test room load, according to DIN 50011 / EN 60068, without test specimen, in the temperature range of -30°C to +85°C) - Cooling rate (according to DIN 50011): approx. 2.0 K/min (without thermal test room load, according to DIN 50011 / EN 60068, without test specimen, in the temperature range of -30°C to +85°C) Performance Range for Climate Testing: - Temperature range: +10...+90°C - Humidity operating range: 10...approx. 95% RH (without thermal test room load) - Dew point temperature range: +5...+89°C (without thermal test room load) - Humidity stability (supply air, over time): ≤ ± 2.5% RH (measured in supply air) Performance Range for Climate Testing with Heat Compensation: - Temperature range: +15...+80°C - Humidity: 15...approx. 80% RH (without thermal test room load, with max. 16 kW heat compensation) - Dew point temperature range: +10...+74°C (without thermal test room load) Dimensions: - Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm - External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm - Clear door opening, test chamber door (W x H): 2260 x 2260 mm - Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm - Control cabinet (W x D x H): 800 x 500 x 2000 mm Design: - Air guidance: Supply air via perforated sheet at rear wall, in ceiling area; exhaust air via perforated sheet at rear wall, in floor area - Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating by electric resistance heater - Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger - Interior liner: Stainless steel - Exterior cladding: Galvanized, plastic-coated sheet steel - Floor design: Stainless steel, floor load capacity 15,000 N/m², wheel load (contact area ≥4cm²) 1500 N/wheel - Door: Double-leaf door, stainless steel, externally coated with viewing window (W x H): 1000 x 1000 mm - Test chamber lighting: 4 spotlights, 500 W each - Insulation: Two-layer insulation, 80 mm PUR foam, 120 mm mineral wool - Refrigeration unit (1 pc.): Bltzer 6G-30.2Y - Refrigerant: R449A - Refrigeration oil: SEZ 32 - Steam humidifier (1 pc.): EDB 40 Colors: - Chamber: RAL9010, white - Door: RAL9010, white - Machine unit: RAL7032, pebble grey - Control cabinet: RAL7032, pebble grey Weights: - Total unit: approx. 4900 kg - Machine set KB 127: approx. 750 kg - Control cabinet: approx. 120 kg - Humidification system: approx. 64 kg Connections: - Rated voltage: 400 V +6%/-10% 3/PE N 50Hz Pgjdezizk Hepfx Al Det - Rated power: 95 kW - Rated current: 150 A

Tilstand: god (brukt), Byggeår: 1998, Funksjonalitet: fullt funksjonell, Produsent: Heidelberg Modell: Speedmaster 102-8-P Årsmodell: 1998 Trykk: 359 millioner Utstyr: - CP Tronic betjeningspult - CPC 1-04 fargestyring - Alcolor fuktesystem - Autoplate plateskiftesystem Ytterligere egenskaper: Pgedpfozd R Hgex Al Dot - Automatisk gummiduk vaskesystem - Autoregister - Elektronisk dobbelarkkontroll - Elektronisk sidemerkekontroll - Høy stabellevering (High Pile Delivery) - Arkplaningsenhet (Sheet De-curler) - Antistatikksystem - Stålplater i innmatning og levering - Super Blue-utstyr - Technotrans kjøle- og resirkuleringssystem - Weko puddersprøyteapparat Maks. format: 720 × 1.020 mm Maskintype: Arch offset trykkpresse Maskinmodell: 8-fargers vendemaskin (Perfector)

Tilstand: brukt, Plate thickness 4.0 mm Plate thickness for stainless steel 3.0 mm Blade length 200 mm Angle adjustable from 30° to 120° Strokes 60 strokes/min Oil capacity 60.0 ltr. Table: 1000 x 800 mm Total power requirement 2.62 kW Pgedpfx Alsxab N Rj Dst Weight 800 kg Dimensions L-W-H: 1000 x 1500 x 1440 mm Equipment: - Robust hydraulic notching machine with adjustable angle - Adjustment range 30° – 120° * Adjustment using two front handwheels - Hydraulic clamping and locking - Cutting depth steplessly adjustable with digital display - 2x precision stops with stop bars - Scraper for sheet metal cutting - Collection container for cuttings - Freely movable foot pedal for stroke activation

Tilstand: brukt, Plate thickness 4.0 mm steel (ST) Plate thickness 3.0 mm stainless steel (VA) Table size 1200 x 780 mm Blade length 200 x 200 mm Strokes per minute approx. 60 Angle adjustable from 15° to 150° Motor power 4.0 kW Machine weight approx. 1200 kg Podexaavpjpfx Al Degt Space requirement approx. 1700 x 1000 x 1500 mm Features: - Electro-hydraulic notching machine with angle adjustment 15° - 150° * Angle adjustment via handwheels - Front control panel - Plexiglass safety guard for increased visibility - Hardened blades suitable for cutting stainless steel - Planed table surface * Prevents the sheet from jamming or slipping - 2x positioning stops * With movable and replaceable stop bars - Lateral scrap ejection - Free-moving foot switch - Operating manual * Machine link: ?machineno=1008-9397092

Tilstand: brukt, Plate width: 1050 mm Plate thickness: 3.0 mm Pgodpfx Aljxablls Dot Plate thickness (stainless steel): 1.5 mm Strokes per minute: 35 Cutting angle: 2°30 ' Motor power: 3.0 kW Table height: 810 mm Machine weight approx. 1150 kg Dimensions (LxWxH): 1300 x 1520 x 1170 mm From a maintenance workshop (!!) Equipment: - Sturdy electrically operated guillotine shear - Manual back gauge - Adjustable up to 610 mm, operated from the rear via handwheel - 1x side gauge with mm scale - 2x table support arms - Piece counter - Movable foot switch - Rear sheet metal chute - Emergency stop button at the front * Machine link: ?machineno=1008-9325126

Tilstand: svært god (brukt), Byggeår: 2003, Ref:11066. 2003 Autobond 105 THS. B1, enkelsidet, helautomatisk termisk lamineringsmaskin. Pgsdpfx Aljydnxno Djt Meget god stand, kjørt mindre enn 1,5 millioner ark! Utstyrt med: - Heidelberg dypstabel sugemater med bakadskillelse - 250 mm (10") diameter, høypolert krom lamineringsrull - Lamineringsnipetrykk opptil 6 metriske tonn - Film monteres på en hurtigskift luftaksel - Kanttrimmer og perforeringsmekanisme - Pneumatisk clutch sikrer presis filmspenning - Sveitsiskprodusert temperaturkontrollenhet - Skjæreaggregat – integrert avskillervalse med anti-krøllstang - Leveringsbord for pall Tilbehør: - Ioniser Pro statisk eliminator Spesifikasjon: Maks arkmål: 105 cm (40”) x 76 cm (30”), Min: A4 Papirvekt: 90 gsm (80lb) – 650 gsm (24 PT) Filmområde: 8 mikron jomfrufilm & 24 mikron (1 mil) til 75 mikron (3 mil) termisk Toppfart: 45 m (150’) per minutt med stigende stabelmater.

Tilstand: brukt, Byggeår: 1998, Plate width: 3060 mm Pgodpfx Ajyq Szmsl Dst Sheet thickness: 6.0 mm Sheet thickness for stainless steel: 4.0 mm Gap between side frames: 3100 mm Hold-downs: 16 pieces Stroke rate max.: 10 - 15 strokes/min Oil capacity: 160 litres Shear angle: 1.6° Backgauge - adjustable: 6.0 - 750 mm Control unit: ELGO P9521 Total power requirement: 18.5 kW Weight: 6300 kg Dimensions L-W-H: 3900 x 2300 x 1630 mm Equipment: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521 for electric backgauge * Backgauge travel X = 750 mm * Backgauge with backlash-free ball screw * Travel speed 100 mm/sec - 1x sturdy side gauge * with T-slot, flip-stop and millimetre scale - 2x front, stable support arms - Electric cutting length limiter * Cutting length limiter for increasing strokes per minute - Manual blade gap adjustment * Centrally operated at the right side frame - Front support plates - Front finger/hand guard - Jog mode with push buttons on the left control panel - Safety guard = safety device behind the machine - Operating manual

Tilstand: svært god (brukt), Byggeår: 2012, Funksjonalitet: fullt funksjonell, tankkapasitet: 36 784 l, total høyde: 6 245 mm, innvendig diameter: 3 400 mm, ytre diameter: 3 770 mm, totalvekt: 4 000 kg, undertrykk: 0,02 Pa, overtrykk (maks.): 2 stang, 2 x 37 m³ ZKG tank / beer pressure tank / fermentation and storage tank Technical data / dimensions Available quantity: 2 Total volume: approx. 36,784 liters Type of vessel: Pressure tank Condition: used Food-grade: yes Design: suspended Internal diameter: approx. 3,400 mm External diameter: approx. 3,800 mm Total height: approx. 6,245 mm (incl. insulation dome approx. 7,245 mm) Pgodpeyhzrgofx Al Dst Weight (empty): approx. 4,000 kg Specific weight of medium: 1.0 t/m³ Operating pressure: overpressure Operating pressure: 2 bar Test pressure: 2.9 bar Wall thickness cone: approx. 3.5-5 mm Wall thickness top head: approx. 6 mm Wall thickness shell/cylinder: approx. 3 mm Operating temperature: -10°C / +50°C Material: Inner shell material: V2A (1.4301) Internal surface: polished and pickled Heating / cooling system Cooling medium: glycol Operating pressure: 3.0 bar Operating temperature: -3 degrees Celsius Material of heating/cooling system: V2A (1.4301) 1 x shell cooling zone with approx. 112 ltr. volume 1 x cone cooling zone with approx. 40 ltr. volume Insulation Insulation thickness: approx. 150 mm (cylinder + top head), cone: 100 mm Insulation material: PU foam Cone cladding: stainless steel (1.4301) Shell cladding: aluminium trapezoidal sheet Equipment Mounting type: support lugs Number: 4 Attachment: fixed Top head type: torispherical head Bottom type: cone Top head: 1 x manhole DN 1000 with insulation cover and vent DN 80 1 x roof edge railing 1 x spray ball DN 32 incl. spray pipe (removable) 1 x CIP-air valve combination (RLV) consisting of: 1 x vacuum valve DN 50 1 x safety valve DN 25 1 x cleaning connection DN 100 1 x air connection DN 50 (threaded) Shell: 2 x connections for temperature measurement with insulated box 1 x condensate pipe DN 32 1 x sampling pipe DN 10 1 x cable protection pipe DN 50 1 x cleaning pipe DN 50 1 x return header DN 40 (cooling) 1 x supply cooling DN 25 1 x vent for cooling DN 10 1 x drain for cooling DN 20 Bottom head/cone: 1 x sampling outlet DN 10 1 x swivel cone NW 450 1 x cone with threaded connection DN 100 at end Documentation: Drawing Inspection book TÜV certificate

Tilstand: ny, Maskintype: Stående deighevel Materiale: Helt rustfritt stål Båndbredde: 630 x 2400 mm Utslått: 3100 x 1100 mm Sammenfoldet: 760 x 1720 mm Dimensjoner: 3100 x 1060 x 1100 mm Justerbart valsegap: 1–38 mm Maks valsingskapasitet: 6,5 kg per omgang Elektrisk effekt: 0,75 kW – 380 V Pgedpsuug S Tofx Al Djt Vekt: 260 kg

Byggeår: 2026, Tilstand: som ny (utstillingsmaskin), maskin-/kjøretøynummer: S23Synthesi01, Stretch wrapper Synthesi TECHNICAL DETAILS Turntable/base frame Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (including pallet): 2,200 mm Turntable height: 75 mm Height detection via photoelectric sensor Frequency-controlled turntable drive (soft start/stop) Frequency-controlled carriage speed upwards/downwards Acoustic signal at start and end of wrapping cycle Emergency stop switch according to CE regulations Turntable always stops in the same home position Anti-drop safety device for the film carriage Push buttons to switch machine on, start/stop, and reset according to CE standards, Ø 22 mm ADJUSTABLE PARAMETERS ON CONTROL PANEL All functional parameters adjustable via display F00 - Program change lock F02 - Infinitely variable turntable speed, 5–12 rpm Carriage speed upwards and downwards adjustable independently F03 - Carriage speed upwards: 1.3–5.4 m/min F04 - Carriage speed downwards: 1.3–5.4 m/min F05 - Number of wraps at pallet base (1–10) F06 - Number of wraps at pallet top (1–10) F09 - Photocell wrapping height delay F13–F16 - Film tension for base & top wraps / ascent & descent separately adjustable F62 - Ergonomic height for film change Film consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON CONTROL PANEL 6 storable wrapping programs F01-1 - Cross wrapping (upwards/downwards) F01-2 - Simple wrapping (only upwards or only downwards) F01-3 - Push button for manual functions F10–F11 - Wrapping cycle with predefined start and stop height F12 - Wrapping to a stored height (disabling photoelectric height sensor) F22/F23 - Wrapping cycle for top sheet application F29 - Soft start cycle for edge protection application F30–F31 - Wrapping cycle with reinforcement and adjustable number of wraps Soft start to reduce film breakage on sharp pallet edges Wrapping cycle with manual or motorized rope formation (optional) Reinforcement cycle via push button FILM CARRIAGE TYPE “FM” WITH MECHANICAL BRAKE Manual brake roller adjustment on film carriage Film specification: max. outer diameter Ø 250 mm - core Ø 76 mm - height = 500 mm Standard connection values: 230 V – 1L+N+PE – 50 Hz Total power: 1.2 kW / 6A Options available: FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH” Film pre-stretch ratio set at 200% Turntable size up to Ø 2,600 mm Mast height up to 3,900 mm Ramp Installation frame Light sensor for black products Pedpfjykuddjx Al Dogt Cutting device etc. Other units available from stock in Ludwigsburg. Photos may include optional extras at additional cost.

Tilstand: brukt, Byggeår: 2001, maskin-/kjøretøynummer: 14873, LODIGÉ Film Coating and Enrobing Turbine Type: LHC170 Year: 2001 Psdpfx Aewpwt Hel Degt Drum volume (partially perforated): 550 litres Drum material: AISI 316, polished to K240 grit CIP (Clean-In-Place) system Batch size: 165-550 kg Sold with: - Turbine - Air handling unit comprising: * 2-stage filtration (F8 + H13) * 1 preheating coil (steam) * 1 dehumidification coil (chilled water) * 1 main heating coil (steam) * Blower fan - Trolley with Watson Marlow spray pump, 5 heads - Dust extractor - Exhaust air filter - Extraction fan - Noise attenuator - Electropneumatic control cabinets - Siemens S7-300 PLC - Control panel - PC with Lödige supervision (WinCC) - Control panel languages: German and French - CIP skid with Prominent dosing pump - All required operating peripherals: * Loading chute * Discharge chute * Sight glass cap * 5 spray nozzles * Flexible connection pipes for the CIP skid Dimensions: L3000 x W2300 x H2700 mm Weight of turbine section: 3 tonnes Complete documentation (in French) including: * P&ID * Layout Drawings * Operator manual * Technical sheets * Material certificates * Etc. Full program backup performed prior to machine shutdown.

Tilstand: ny, Funksjonalitet: fullt funksjonell, Byggeår: 2026, AT-SERIEN Fibermaskin for innstegsnivå – plate- og rørskjæring En maskin til to formål. AT-serien kutter både metallplater og metallrør. Plate- og rørfiberlaserskjæremaskiner A-T Serien Funksjonsforbedringer Plate- og rørfiberlaserskjæremaskiner A-T Serien Ekspert-database for høye skjærehastigheter Rask lufskjæring øker effektiviteten med 37 % ved kutting av karbonstål. Plate- og rørfiberlaserskjæremaskiner A-T Serien Aktiv antikollisjonsfunksjon Fiberlaserskjærehoder kan oppdage fremspringende hindringer for å effektivt redusere skadefrekvensen og senke vedlikeholdskostnadene. Plate- og rørfiberlaserskjæremaskiner A-T Serien Bodor Lightning Lynrask gjennomhulling – BodorGenius-teknologien sørger for at gjennomstikking skjer umiddelbart når laserskjærerhodet beveger seg ned langs Z-aksen. Plate- og rørfiberlaserskjæremaskiner A-T Serien Ingen vibrasjon ved tynnplateskjæring Skjæringen er nøyaktig selv ytterst på tynne plater, uten vibrasjons- eller hakkemerker. Plate- og rørfiberlaserskjæremaskiner A-T Serien Standard for vinkelstål og kanalstål Skjæring av vinkelstål og kanalstål er standard – ingen tilleggsinstallasjon nødvendig. Podpfjhtyutsx Al Djgt Plate- og rørfiberlaserskjæremaskiner A-T Serien Firesidet kantregistrering for høyere presisjon Optimalisert metode og algoritme for kantregistrering gir økt skjæreprecisjon og bedre stabilitet. Mekanisk konfigurasjon Plate- og rørfiberlaserskjæremaskiner A-T Serien Ekstrudert aluminiumstverrbjelke Ekstremt høytrykks-ekstruderingsprosess og lav vekt – 60 % høyere rigiditet og 20 % lavere vekt; opp til 50 % høyere kjørehastighet. Plate- og rørfiberlaserskjæremaskiner A-T Serien Modulært bord Det modulbaserte skjærebordet med avstivere gir enkel demontering og økt stivhet. Plate- og rørfiberlaserskjæremaskiner A-T Serien Pneumatisk chuck Rask, enkel og presis innspenning på så lite som 3 sekunder, med høy repeteringsnøyaktighet. Programvare BODORTHINKER BodorThinker er et high-end, intelligent styringssystem for CNC-laserskjæreren, med stabil drift, enkel installasjon og justering, sikker produksjon, mange funksjoner og høy ytelse. Med BodorThinker får du modulære, skreddersydde, automatiserte og digitaliserte laserskjæreløsninger. Design Vinner av industrielt designpris "Designens Oscar", én av verdens tre mest prestisjetunge industridesignpriser. Fjernkontroll Ergonomisk mangodesign og praktisk magnetfeste for enhåndsbetjening.

Tilstand: brukt, Byggeår: 1996, Plate thickness 6.0 mm steel Plate thickness for stainless steel 4.0 mm Plate thickness 8.0 mm aluminium Angle adjustable from 30° to 140° Table: 950 x 890 mm Blade length 220 x 220 mm Stroke 35 cycles/min Pjdexabx Eepfx Al Dsgt Working height 1150 mm Total power 3.0 kW Weight 800 kg Dimensions (L-W-H) 1200 x 1200 x 1400 mm New price approx. €20,000 Special price on request - In inspected condition – machine video - ?v=QmUbaV41BfA Equipment: - Electro-hydraulic notching machine * with adjustable angle 30° – 140° - Cutting capacity up to 6.0 mm sheet thickness (R42/MM2) - Made of special spheroidal cast iron GS500 - The cutting motion is from top to bottom - Robust worktable made of steel with conical grooves * ensuring optimum grip for the positioning angles - The scales are embossed - Automatic blade gap adjustment (patented) - System for automatic adjustment of the gap between upper and lower blades * allows simultaneous cutting of different thicknesses - 2x angle-adjustable positioning stops - Plexiglas finger guard - 1x mobile foot switch - Scrap chute, lateral - Lifting hook for easy transportation - Operating manual (PDF)

Tilstand: ny, Byggeår: 2026, Funksjonalitet: fullt funksjonell, transportbåndsbredde: 650 mm, garantiperioden: 24 måneder, total bredde: 3 100 mm, total lengde: 1 143 mm, total høyde: 1 248 mm, inngangsspenning: 400 V, bordlengde: 1 320 mm, egenvekt: 310 kg, åpningsbredde: 50 mm, arbeidsbredde: 650 mm, krav til højde: 2 070 mm, plassbehov lengde: 1 143 mm, påkrevd bredde: 1 430 mm, transportbåndets lengde: 2 640 mm, Ny maskin med 24 måneders garanti Fordeler: + Utmerket pris-ytelsesforhold + Robust, mobil sokkel-utkjevlingsmaskin + Betjening mulig med spak og pedal + Egnet for all type deig til utkjevling og laminering + PVC-transportbånd, enkle og raske å rengjøre + Derfor også egnet for marsipan og rullefondant + Integrert elektrisk motor + Stor digital visning av valseinnstilling, i stedet for mm-skala på spaken + Bordene kan vippes opp både til venstre og høyre + Skraper kan enkelt tas ut uten verktøy + Maskinen er standard utstyrt med 1 håndsveiv + Uttrekkbare deigoppsamlingsplater av rustfritt stål på begge sides av bordene + Rask levering av reservedeler innen 1-2 virkedager Tekniske data: - Båndbredde: 650 mm - Bordlengde: 1 320 mm per side = 2 640 mm totalt - Valsejustering: fra 0,5 mm til 50 mm (avhengig av produkt) - Hastighet: ca. 65 cm/sek - Motoreffekt: 1,1 kW - Tilkobling: 400 V - 3-fas - 50/60Hz - 16A CEE-plugg - Mål: --- Arbeidsstilling: 3100 x 1143 x 1248 mm (BxDxH) --- Hvileposisjon: 1430 x 1143 x 2070 mm (BxDxH) - Netto vekt: 310 kg Pedpfx Aehyc Ubsl Degt Tilleggsutstyr mot pristillegg: - Hurtigkobling for avspenning av båndene for enkel rengjøring Vennligst merk: Dette tilvalget kan ikke ettermonteres, det må bestilles ved kjøp av ny maskin. + 370,– € ekskl. mva. - Meloppsamlingsplater (2 stk.) under valsbordene + 210,– € ekskl. mva.

Tilstand: brukt, Byggeår: 1984, Plate thickness: 3 mm Total power requirement: 2.2 kW Throat depth: 200 mm Motor: 2.2 kW Sheet length: 1100 mm Stroke: 56 mm Motorized guillotine shear Hera HSS III 1100 mm x 3 mm Podpfx Aljv H Hfne Dsgt Space requirement approx. WxDxH 2000x1500x1800 mm The machine is used but in good condition.

Tilstand: ny, Deigutrullemaskin Ital Form Pedpfx Aljuug Ems Degt Robust konstruksjon Store valser sikrer utmerket laminering, samt pålitelighet og høy holdbarhet Mål på åpen maskin: 3380x1010x1160mm Mål på lukket maskin: 1080x1010x2250mm Båndlengde: 1500mm Elektrisk effekt: 0,75kW / 1,1kW Spenning: 400V 50Hz Maksimal deigmengde: 8 kg Maskinvekt: 250 kg

Tilstand: brukt, Byggeår: 1989, Plate thickness 4.0 mm ST Plate thickness 3.0 mm VA Table size 1200 x 780 mm Blade length 200 x 200 mm Strokes per minute approx. 60 min Adjustable angle from 15° to 150° Motor power 4.0 kW Machine weight approx. 1200 kg Required space approx. 1700 x 1000 x 1500 mm Equipment features: - Electro-hydraulic notching machine, with angle adjustment 15° - 150° * Angle adjustment via handwheels - Front operation panel Pjdpoxaa N Nsfx Al Degt - Plexiglass guard for improved visibility - Hardened blades, suitable for cutting stainless steel - Planed table surface * To prevent 'jamming' or 'slipping' of the sheet - 2x positioning stops * With movable and replaceable stop bars - Lateral scrap ejection - Freely movable foot switch - Operating manual * Machine link: ?machineno=1008-9397088

Tilstand: nesten som ny (brukt), Byggeår: 2016, Jung Supromatic JF 520 Jung Supromatic JF 520 flat grinding machine, year of manufacture 2016, in very good, thoroughly overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Specifications: Year of manufacture: 2000 Technical details: Clamping surface (L x W in mm): 600 x 200 Grindable area (L x W in mm): 600 x 250 Max. magnet size (mm): 500 x 200 Max. grinding wheel dimensions (mm): 225 (250) x 25 x 51 Distance table/spindle center (mm): max. 400 Pgodoy Naw Ispfx Al Det Table longitudinal feed, oscillating (m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive, speed (rpm): 800 – 4200 Power output kW (with creep feed): 1.6 – 2.2 Approx. machine weight: 2.0 t Accessories and Features: Magnetic chuck Coolant system Machine mounts Grinding wheel About the Machine: We offer a flat grinding machine Jung Supromatic JF 520, year 2016, in very good condition. The machine is, of course, fully operational and has only about 50 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung runs with low vibration. This newer generation of surface grinding machines is extremely user-friendly and enables the production of surfaces with a very low Rz value. Take the opportunity to inspect this machine on site under power and see its condition for yourself. What Has Been Overhauled Mechanical scope of work: - General mechanical overhaul - Hydraulics - Feed mechanisms - Lubrication - Cross and vertical adjustment - Grinding spindle - Dressing unit - Painting in new machine quality Geometric scope of work: - Guideway grinding at manufacturer's site (optional) - Scraping of guideways - Column pull, measurement, possible scraping/grinding, re-fitting with new gibs, inspection and patterning of guideways - Setting cross-hatch pattern on the spindle head - Aligning the dresser - Regrinding the table and the magnet - Machine acceptance according to manufacturer's inspection sheet Electrical scope of work: - Renewal of the complete electrical system, all limit switches and buttons - Conversion of the X-axis from cam switch to non-contact limit switches - New control cabinet - RSF position display (2- or 3-axis display) - Holding force control for 24V or EP magnetic chuck - Control system modernization - New auxiliary control cabinet (operator console upper right) - Thyristor control for grinding spindle drive - Manual cylindrical dressing with head dresser or side dresser (for Diaform operation)

Tilstand: brukt, Byggeår: 1990, Plate width: 2503 mm Sheet thickness: 4.0 mm (steel) Sheet thickness: 2.5 mm (stainless steel) Sheet thickness: 6.0 mm (aluminium) Strokes under load: 15 - 20 strokes/min Cutting angle: 1.7° Working height: 900 mm Control: ELGO TYPE 85 Total power requirement: 8.5 kW Machine weight approx.: 3400 kg Dimensions (L-W-H): 2913 x 2250 x 1760 mm Equipment: - Robust NC electro-hydraulic guillotine shear Psdpfoxabd Uox Al Dsgt - NC electro-motorised back gauge * with ELGO control unit - Manual blade gap adjustment - Front support table incl. hand recesses - 1x robust side stop with scale and tilting cam - 2x robust front support arms - 1x movable foot switch - Front finger guard - Emergency stop button at the front - Operating manual (PDF)