Kjøp brukt Feeler Feeler Fv-800A (458)

Byggeår: 2020, Tilstand: svært god (brukt), Weiss Type: C/800/55a/25/S Year of manufacture: 2020 Weiss Climate Test Chamber ClimeEvent, Water-cooled Chamber volume: 800 liters Internal dimensions: Height 950 mm, Width 1100 mm, Depth 800 mm External dimensions: Height 2015 mm, Width 1415 mm, Depth 3156 mm Floor load: Designed for a maximum payload of 250 kg Key values for temperature tests: Temperature range: -55 to +180°C Temperature fluctuation over time at the center of the test space: ±0.1 to ±0.5 K Spatial temperature deviation (temperature gradient): 0.5 to 2.0 K Heating rate: 25 K/min Cooling rate: 25 K/min (to -45°C) Maximum heat compensation: 8000 W Key values for climatic tests: Temperature range: +10 to +95 °C Gkedpfxjziiype Aiwjb Humidity range: 10 to 98 % RH Climatic performance data (extract) Humidity range: 10 to 98 % relative humidity (RH) Humidity deviation (over time): At the center of the test space, in steady-state condition, depending on the climate value: ±1 to ±3 % RH Temperature deviation (over time): At the center of the test space, in steady-state condition, depending on temperature: ±0.1 to ±0.3 K Temperature uniformity (spatial): Relative to the setpoint (in the range > 20 % RH): ±0.5 to ±1 K Operational data: LED strip 24 V, 6.8 W / 2 x Halogen lamp 24 V, 50 W Rated voltage: 3/N / PE AC 400 V ± 10 % 50 Hz Rated power: 53 kW Rated current: 87 A Refrigerant: WT69-R449A The chamber is equipped with a Greenmode Weight: approx. 2050 kg For your safety as a buyer, please note the following information! The following procedures are carried out in advance on all chambers offered by us: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Technical data and specifications subject to change and errors!) For further questions, please feel free to contact us by phone.

Tilstand: god (brukt), EOS Type: P390 Eosint P 390 – Lasersintring System (SLS) Operating hours: 6735 h For sale is an industrial laser sintering system from EOS, model P 390. It is suitable for additive manufacturing (SLS – Selective Laser Sintering) of plastic components on an industrial scale. Base machine with control cabinet & control terminal Exchange frame with build platform The Multibox is a typical accessory for EOS systems, used for powder handling, transport, and interim material storage. Technical data: Build volume: approx. 340 × 340 × 620 mm (X × Y × Z) Minimum layer thickness: 0.1 mm (variance < 0.05 mm) Powder container capacity: 2 × 45 liters with fluidization and dispenser Heating: Infrared, 3.2 kW Nitrogen generator: integrated, purity > 99% Power supply: 400 V ±6/–10%, 50 Hz, 3 × 32 A, power consumption approx. 2 kW Extraction: 20 m³/h at 6 bar, DN 100 Cooling: 5.7 l/min at 18–20 °C (±0.1 °C) Dimensions & Weight: Machine (W × D × H): approx. 1230 × 1175 × 2100 mm Control cabinet: 610 × 790 × 2100 mm Control terminal: 950 × 700 × 1550 mm SMC HRS024-AN-20-T Thermo-Chiller – Air-Cooled – High-Pressure Pump Technical data Model: HRS024-AN-20-T Cooling capacity: approx. 2.1–2.4 kW Temperature range: 5 °C to 40 °C Temperature stability: ±0.1 °C Cooling type: Air-cooled Pump: High-pressure pump (“T” version) Flow rate: up to approx. 14 l/min Tank volume: approx. 5 liters Medium: Water or water-glycol Connection: NPT version (“AN”) Supply: 200–230 V AC, single phase Refrigerant: R407C Gkodpfxjzimhqo Aiwsb Weight: approx. 1110 kg Condition: used Scope of delivery: (see image) (Changes and errors in the technical data and information reserved!) For further questions, please feel free to contact us by phone.

Tilstand: svært god (brukt), Weiss Type: WK-600/70 (I)-(II) 2 G EEx /22605147 Weiss Climate Chamber, Water-Cooled (Test chamber explosion-proof) INERTING WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER Technical Data: Test Chamber Designation: WK-600/70 (I)-(II) 2 G EEx External dimensions with hinges and door lock: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock: Height 1995 mm, Width 1000 mm, Depth 1660 mm Test chamber volume: approx. 600 litres Cooling / heating operation: -70 to 180°C Climate operation: 10 – 95°C Humidity: 10...98% r.h. Temperature change rate: Cooling approx. 2.5 K/min Heating approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Customer-provided fuse: 32 A slow-blow Permissible test load: Total rack load: 80 kg Test chamber floor: 80 kg, insert rack: 40 kg Weight: 800 kg Refrigerant: R 404A/R 23 (The evaporator of the air conditioning system has been replaced) Important safety information for buyers! The following procedures are carried out in advance on our offered chambers: Gkodjzh D Ryopfx Aiwsb 1. Functional inspection and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, a documented test run is carried out. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and details!) Further questions? Feel free to contact us by phone.

Tilstand: svært god (brukt), Binder Type: VDL 115 Binder Safety Vacuum Drying Oven For sale: a BINDER VDL 115 safety vacuum drying oven for professional use in laboratories, industry, and research. Device Description: The BINDER VDL 115 is an explosion-proof vacuum drying oven designed for gentle drying, degassing, and conditioning of materials under vacuum. The unit is specifically engineered for applications involving flammable solvents and meets high safety requirements (ATEX compliant). Its precise temperature and pressure control make it ideal for reproducible laboratory and industrial processes. Typical Fields of Application: - Chemical and pharmaceutical laboratories - Research & Development - Quality control - Industrial vacuum drying processes Temperature / Vacuum: - Temperature range: +9°C above ambient up to approx. +110°C - Ultimate vacuum: up to approx. 0.01 mbar - Electronic temperature and pressure control Equipment: - Safety glass viewing window with shatter protection - ATEX compliant design - Multiple shelf levels (number depends on configuration) - Connections for vacuum and inert gas Dimensions: - Internal volume: approx. 115–119 liters - Internal dimensions (W × D × H): approx. 506 × 460 × 506 mm - External dimensions (W × D × H): approx. 743 × 581 × 942 mm Gsdpfxoznbm Es Aiwjkb Electrical Data: - Rated power: 1.90 kW - Power supply: 230 V / 1N~ - Current draw: 8.3 A - Frequency: 50–60 Hz - Protection class: IP54 - Nominal temperature: 200°C - Temperature protection: DIN 12880, Class 2.0 - Weight (empty): approx. 158 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Tilstand: brukt, Dematic Conveyor System Accumulation Roller Conveyors Accumulation Roller Conveyor 15000-750-690 RA2458 The roller conveyor shown does not exactly match the depiction in the listing, but it is the same model and in the same condition. Only the dimensions differ. Additional information: Manufacturer: Dematic Type: accumulation roller conveyor Year of construction: unknown Conveyor length (FL): 15,000 mm Condition: good (used) Roller width (RB): 690 mm Nominal/outer width (NB): 750 mm Accumulation bay size: 750 mm Accumulation bay control: plug and play, electro-pneumatic Godpsyb Upzefx Aiwskb Roller pitch: 125 mm Drive type: head drive SEW Eurodrive Conveying speed: approx. 0.35 m/s Optional accessories available, e.g.: Frequency converter for stepless speed regulation Supports Side guides Price: Net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, expert advice, simply contact us. Please feel free to get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics.

Tilstand: svært god (brukt), You are bidding on: a branded machine – folding machine from a very good and renowned manufacturer – Schröder. Machine features: Folding machine Schröder AKV Bending beam bends cleanly – test possible Digital angle display Bending length just over 2m Sheet capacity: 2 mm steel sheet (iron), for aluminium, zinc etc. – up to approx. 3 mm Gkodpfxjy Hbv To Aiweb Standard rail fitted, optionally with segmented fingers (see photo) Optional: depth stop Matching guillotine shear available (e.g. Schröder 2m/3mm, see last photo, or Schechtl HT, Ras ...) Current new price approx. €20,000 net without accessories Important! Optionally, you can find and purchase many machines and accessories in our shop, including various rails, depth stops – everything relating to sheet metal and steelworking, such as folding machines, guillotine shears, drilling machines, slip rolls, slitting and profiling machines, spare parts and accessories (beading tools, round rolls for gutter production, backgauge, etc.), as well as a range of hand tools and spare parts from many top manufacturers. Please feel free to contact me if you have any questions. You will receive an invoice pursuant to § 25a UStG. Free loading possible – weight approx. 1,550 kg Inspection and testing are possible and encouraged by prior telephone arrangement. Payment in cash upon collection. Benefit from our experience and expertise – we are happy to advise you. Collection by the buyer (or a freight forwarder commissioned by the buyer) should be made within 10 days of the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Folding Machine Schröder AKV 260401

Tilstand: klar til bruk (brukt), Funksjonalitet: fullt funksjonell, totalvekt: 2 800 kg, farge: blå, egenvekt: 1 800 kg, Byggeår: 2010,

Tilstand: ny, Byggeår: 2025, aksel lengde: 1 064 mm, laser effekt: 20 W, døråpningsbredde: 480 mm, PREMIUM L – Model 2025 – The Marking Champion Among Laser Engravers! Metals – Plastics and much more! • EZCAD 3 (true 64-bit board) with up to 4 axes • Intel i3 or i5 with 8GB RAM and ultra-fast M2 SSD • 23” TFT display for fatigue-free operation • Suitable for Windows Professional 64-bit • Professional JPT MOPA fiber laser source with 20 watts power and up to 600 kHz (optional with variable pulse width and up to 2000 kHz for colour annealing marking) • Scanner unit "DigiScan Eco 10" for detailed and precise results • T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece • Large viewing window with certified screen -> door opening 480mm • Scan area approx. 100 x 100 mm (optional 150/200/300 mm) • Manual height adjustment with focus finder • Enclosure with manual door for easy and safe marking • Professional marking software in German • Barcode and QR code support • Serial number function • Batch scanning from Excel file, network, or database • Laser parameter finder via matrix using 2 parameters (e.g. frequency to speed, frequency to power) • TCP/IP connectivity: various commands can now be sent via the TCP protocol to the software, allowing simple integration of external components like camera position detection, etc. • Industry 4.0: the current status can always be processed via TCP/IP protocol • I/O ports for automation • New look and feel: a fresh design for even clearer and more convenient operation • 3D preview for rotary axis operations • Performance increase of up to 50% thanks to 64-bit technology • Improved stability • Optionally control up to 4 axes WITHOUT switching using plugins • Optional DEEP engraving (slicer software with Z-axis control) • New algorithms enhance engraving speed for hatching • Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus position checking • LED illumination of the marking area for optimal lighting • External exhaust extraction connection • Start button and emergency stop on the housing • Software compatible with Windows 10 • USB cable for PC connection • Operating manual and user software in German We also offer the following options: => Base frame with casters and space for PC and exhaust system => IPG or SPI fiber laser sources in various power ratings => Motorized and automatic height adjustment => Scanlab equipment => Suitable extraction systems => Automation for loading, conveyor belts, and much more! Gjdjf E Ifbepfx Aiwskb => 3D marking and engraving functionality => Automatic focus setting via special laser sensor => Rotary unit in various versions => Motorized X and Y slides => Interlock system for marking WITHOUT protective housing, using only PPE (personal protective equipment) for bulky parts Including training at our Schweinfurt training centre! Our engraving lasers are manufactured in-house at our Schweinfurt facility! Therefore, special requirements can always be accommodated! => Made in Schweinfurt! Images may show optional equipment! We are your partner for laser engraving machines and laser marking systems. Whether manual or automatic laser marking solutions, we are happy to provide you with a customised offer.

Tilstand: klar til bruk (brukt), Byggeår: 2024, Permanent overband magnet separator TYPE DMPM1400 2,000 x 900 x 220 mm ===== Heavy-duty welded steel construction Design welded and painted RAL 7016 (anthracite grey) Magnet dimensions: 1,400 x 500 x 180 mm Drive roller + return roller made of S235 steel, welded and machined Ø220 x 700 mm crowned and precision-turned, shaft secured with tension bearings. Drive: GEMOTEG shaft-mounted gear motor 1.1 kW, belt speed 0.4–0.6 m/sec Connection: 400V, 50Hz, protection class IP54 Drive pre-wired up to the motor terminal box (Commissioning must be performed by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU, black matte, 5.4 mm thick Belt width: 650 mm 10 pcs. TG-40 profiles, high frequency welded Belt material: 3-ply, especially transversely rigid * Equipped with stainless Alligator fasteners RS125 Magnet properties: Installed magnet core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite magnet core encased in soft iron for maximum permeability. Housing tightly sealed and encapsulated with 1.4301 stainless steel plate and pole shoes. Conveyor belt, conveyor system, discharge belts, belt conveyor, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator Godpfx Ajhun U Usiwekb Our core competence is delivering exactly what the customer needs. We work together with our customers to develop individual, custom solutions and supply systems from our own in-house production. Please feel free to contact us by phone to find the right solution for your application.

Tilstand: brukt, Føllehåndsmåleapparat, måleur, følepinne, måleføler, sentreringsapparat, centrizer, 3D-føler, følerinnsats, målefølerhode, digimatisk indikator Godpfx Aog T Amrjiwekb - Produsent: Heidenhain, måleføler TS 220 . 293 488-07 - Holder: SK50 - Koffert: med tilbehør, se bilde - Koffertens dimensjoner: 400/195/H140 mm - Vekt: 6,4 kg

Byggeår: 2025, Tilstand: som ny (utstillingsmaskin), Vår mobile strekkfilmmaskin er en av våre demonstrasjonsmaskiner, i god stand, med noen lette riper på kabinett og chassis, leveres med 12 måneders garanti, fullstendig testet og vedlikeholdt. På forespørsel kan den leveres med ekstrautstyr som for eksempel bredt søkebånd. Fordeler i oversikt: - Arbeidsområde på kun 750 mm rundt pallen - Ekstremt kompakt design - Patentert styresystem - Opptil 40 % mindre plassbehov enn konkurrentene - Meget enkel betjening - Norsk brukerstøtte - Oppgraderinger kan bestilles senere LEO trenger bare 75 cm (omtrent en skulderbredde) rundt pallen som skal strekkfilmes. ARBEIDSOMRÅDE Pallestørrelse: Høyde: min. 500 mm / maks. 2 000 mm Lengde: min. 600 mm / ingen begrensning Bredde: min. 600 mm / ingen begrensning Maskinstørrelse: Høyde: 1 950 mm Lengde: 980 mm Bredde: 700 mm Pallevekt: min. 50 kg (mulig med lavere vekt som tilvalg) FOLIEINFORMASJON Viklingsprogrammer: - Fot- og toppvikling - Kryss- og enveisvikling - med stopp for toppark Foliebredde maks. 500 mm Kjernediameter maks. 76 mm Ytre diameter maks. 220 mm MASKINSPESIFIKASJONER Spenning: - Batteri: 2x 12 Volt - Lader: 220 Volt integrert - Drift: 2x 24 Volt - Folievogn: 1x 24 Volt Folievogn: - Separate parametere for opp- og nedbevegelse - Mekanisk bremse på folien - Trinnløs justering Styring: - Touchpanel med digital visning - Hurtigtaster - Styrestang med navigasjonstaster - Palleavlesning via søkebånd - Nødstoppbryter - 6 lagringsbare arbeidsmoduser - Dobbel kollisjonsbeskyttelse Mast: Stasjonær konstruksjon Vekt: 195 kg YTTERLIGERE INFORMASJON Gsdshfc Riopfx Aiwskb - Høydegjenkjenning med fotocelle - Alle drivverk med kjede - Kan vikle svarte produkter eller bruke svart strekkfilm (tilvalg) - Akustiske og optiske varselsignalere - Maskinen er CE-merket Strekkfilming av svarte produkter eller bruk av svart strekkfilm mulig. Kan lades i en vanlig husholdningskontakt med 230V og hvilket som helst kabel med Europlugg. Slik ladekabel følger selvfølgelig med i leveransen.

Tilstand: brukt, Byggeår: 2023,

Tilstand: brukt, Byggeår: 2023,

Tilstand: ny, Byggeår: 2025, slipeskivebredde: 480 mm, slipeskivens diameter: 720 mm, Emne diameter 1 - 300 mm, slipehjul diameter maks 725 mm, slipehjulbredde 300-380 mm, maskinens egenvekt ca. 13,5 tonn, maksimal drivkraft 100 kW. Gkedpfx Aodld T Reiwob Senterløs slipemaskin for gjennommatings- og innstikksliping, fast slipesenter. Slipehjul diameter 725 mm for maksimal levetid og produktivitet, spesielt ved bruk av konvensjonelle slipehjul. Hydrostatiske føringer for høyeste presisjon på slipe- og reguleringsslede. Direkte drift via servomotorer for slipe- og reguleringsslede. Avretter med separat slede for kopimal og servo-kontur. Høydejustering av styreskinne via servomotor, noe som gir rask og enkel omstilling.

Byggeår: 2011, Tilstand: som ny (utstillingsmaskin), maskin-/kjøretøynummer: 10.000 Ltr, Tank & Environmental Protection Wozniack - Certified Company according to Water Resources Act Gsdpfx Aecl Sb Rjiwekb Dear Sir or Madam, We offer a 10,000-liter double-walled storage tank for diesel storage with the following specifications: Nominal capacity: 10 cbm Quantity: 1 Used, but fully refurbished, meaning the tank has been cleaned, reconditioned, primed, and painted Paint finish in RAL color as desired Material: steel-in-steel, material S235JRG2 Documentation: Manufacturer’s certificate/test certificate according to DIN 6616 D/2 and identification plate Design: cylindrical, horizontal, mounted on 2 welded saddle feet (ground clearance approx. 100 mm) Interstice of double walls equipped with leak detection liquid. Tank dimensions: Length: approx. 5,350 mm plus diesel pump 600 mm Diameter: approx. 1,600 mm Weight: approx. 2,000 kg Equipment/fittings: - 500 mm manhole with cover, bolts and gasket - 2" filling pipe with TW closure (filling cap) (from 20 m³ = 3") - 1¼" suction pipe - Dipstick and dipstick closure, tank content indicator - 1½" vent fitting with cap - Overfill prevention sensor with type approval - Visual leak detector (LAS, with filled leak detection liquid) - Access ladder for side mounting, supplied loose Tank is approved for use outside earthquake/flood risk areas. Diesel dispensing unit with data collection Type: HDM80eco LTE 75 l/min output Cloud-based standard module included free of charge See who filled up, when, where, and how much Fueling via tank key or PIN entry Filling/bunkering area Type: KAP system, galvanized Base area with drive-on ramps (mm): approx. 2,650 x 5,300 Base area without ramps (mm): approx. 2,500 x 5,000 Sump height (mm): approx. 60 - Nationwide general building approval - Approved for installation outdoors and in buildings (For outdoor installation: with hinged cover and conduit feedthrough) - 2 collection sumps with 150 l capacity each ===== Top offer: Liquid fertilizer (AHL) tank systems available in sizes from 10,000 to 100,000 liters. Of course, you can also help design your tank system! All our systems undergo extensive inspection and quality checks by selected employees in our company. Affordable delivery available on request. You are welcome to inspect our systems at any time. Further tanks for above-ground and underground storage in all sizes are available for sale at our premises. Have we convinced you with our offer? If you have any questions or requests, feel free to call us. One of our experienced staff will be happy to assist you. Price/Shipping The price for the fueling station is ex Works Warstein, loaded free of charge. Delivery can be offered at a reasonable extra cost. Delivery time: by arrangement. You will receive an invoice showing the applicable VAT. Additionally, we purchase existing tank systems and, as a certified company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and dispose of them. Best regards from Warstein Tank-Umweltschutz Wozniack

Tilstand: svært god (brukt), Byggeår: 1991, Funksjonalitet: fullt funksjonell, rotasjonshastighet (maks.): 12 000 o/min, Tekniske data – Elumatec AS 70/44 Gkjdpfx Aozgglkeiwsb 1-spindel kopi-fres for aluminium- og PVC-profiler Egenskap Verdi Maskintype 1-spindel kopi-fres Freseområde med anlegg 230 × 90 mm Freseområde med kopimal 230 × 90 mm Spennområde for profiler 180 × 130 mm Freseslag 110 mm Strømtilkobling 230/400 V, 3~, 50 Hz Motoreffekt 0,74 kW Spindelhastighet 12.000 o/min Arbeidstrykk 7 bar Luftforbruk 12 l/syklus uten sprayanlegg, 24 l/syklus med sprayanlegg Mål (L × B × H) 720 × 650 × 1.440 mm Vekt ca. 120 kg Utstyr Allsidig bruk for bearbeiding av aluminium- og PVC-profiler. Kopifresing i forhold 1:1 ved hjelp av mal eller anlegg. Pneumatisk materialklemme. Manuell avsøker med tre nivåer for ulike fresediametre. Pulsspray-enhet for kjøling av verktøy. Enkel betjening via to betjeningshendler. Rask oppstilling og høy bearbeidingsnøyaktighet.

Tilstand: god (brukt), akselkonfigurasjon: 2 aksler, tillatt aksellast (aksel 1): 9 000 kg, tillatt aksellast (aksel 2): 9 000 kg, første registrering: 02/2006, lasteromslengde: 11 640 mm, lasteplassbredde: 2 490 mm, lasteromshøyde: 2 490 mm, total lengde: 12 200 mm, total bredde: 2 600 mm, akselavstand: 7 460 mm, farge: annen, Byggeår: 2006, Utstyr: bakløfter,

Tilstand: brukt, DVS UGRIND 800 er en CNC innvendig og utvendig slipesmaskin konstruert for presisjon, høy nøyaktighet og pålitelighet. Emne Ø 130–500 mm; Z 1200 mm, X 250 mm. Slipespindelmotor 25 kW; emnespindelmotor 24 kW; turtall 0–500 o/min trinnløst; tilkobling 50 Hz 3x 400 V; vekt ~7000 kg; mål L2850×B2490×H2290 mm; driftstid 12 000 timer. Tilbehør: kjølemiddelutstyr, kjølemiddelfilteranlegg, måleprobe, sett med innvendige slipeskiver, sett med flenser, belysning, verktøyskap, elektronisk håndratt. Muliggjør trange toleranser; typiske bruksområder: bilindustri, maskinbygging, luftfart, medisinteknikk, urindustri. Gedpeyxnuaefx Aiwokb

Tilstand: brukt, Byggeår: 2001, Lippert Belt Conveyor Incline Belt with Curve and Straight Section GF 3130-650-500 RA2507 Technical Data: Conveying Length (NL): 3130 mm (Incline Belt 2475 mm + Curve 655 mm) Frame Width (NB): 550 mm Belt Width (GuB): 400 mm Construction Height (BH): 105 mm Support Legs: available as an option Conveying Speed (v m/s): Drive: SEW Gear Motor S37 DT71D4/MM03/BW1 Electrical Data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Return Roller (UR): Ø = 81 mm Drive Drum (AT): Ø = 81 mm Belt: Type HSL 8 E Year of Manufacture: 2001 Gsdjy R Hb Ajpfx Aiwskb Incline/Decline: adjustable Optional Features Available: Supports Side Guides Frequency inverter for stepless control Prices are net, plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, please feel free to contact us. Simply reach out via telephone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and partner for intralogistics

Tilstand: svært god (brukt), Type: VCS 7034-5 Climate Test Chamber, Water-Cooled Test chamber volume: 335 liters Performance for temperature tests: Temperature range: -70 to +180°C Temporal temperature deviation: K ±0.1 to ±0.5 Spatial temperature deviation: K ±0.5 to ±2.0 Temperature gradient: 1 to 4 Rate of change: Cooling: 3.5 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests: Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% r.h. and +95°C / 50% r.h. Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm Gedpfx Aszizl Djiwekb External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Feedthroughs: 1 feedthrough ∅ approx. 50 mm, left 2 feedthroughs ∅ approx. 125 mm, left 1 feedthrough ∅ approx. 125 mm, right Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Nominal power: 10 kW Nominal current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R404A / R-23 For your peace of mind as a buyer, please note the following: We carry out the following steps for our offered chambers in advance: 1. Function check and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see image) (Technical data and specifications subject to change and errors!) If you have any further questions, please feel free to contact us by phone.

Tilstand: svært god (brukt), Julabo Type: FP51-SL (v.2) Deep-cooling thermostat for low temperatures below -50 °C with bath opening for internal and external temperature control HighTech series deep-cooling circulator thermostats with HL or SL controllers are equipped with powerful pressure and suction pumps. The units offer the full range of functions provided by the professional HighTech thermostat series. Technical specifications for FP51-SL Dimensions and Volume Dimensions (W × D × H): 46 x 55 x 89 cm Filling volume: 7.5 ... 12 l Weight: 90 kg Pump connection thread: M16x1 external thread Temperature Values: Operating temperature range: -51 ... +200°C Temperature stability: ±0.05°C Temperature display resolution setting: 0.01°C Temperature display resolution: 0.01°C Permissible ambient temperature: +5 ... +40°C Mains voltage: 400V/3PNPE/50Hz (plug 16A CEE) (R507) Performance Data: Heating power: 3 kW Cooling capacity: +20°C: 2 kW, 0°C: 1.5 kW, -20°C: 1 kW, -40°C: 0.26 kW Refrigerant: R507 Global warming potential: 3985 Filling weight: 1030 g CO₂ equivalent: 4.10455 t Pump performance flow rate: 22 ... 26 l/min Pump performance pressure: 0.4 ... 0.7 bar Maximum suction capacity: 0.2 ... 0.4 bar Max. viscosity: 70 cSt Current draw: 16 A Electronics: Interfaces: Profibus optional Pt100 external sensor port integrated Integrated programmer: 6x60 steps Temperature control: ICC Absolute temperature calibration: 3-point calibration Temperature display: VFD Temperature setting: keypad Voltage variants: 400V/3PNPE/50Hz (plug 16A CEE) (R507) Condition: used Scope of delivery: (see image) (Subject to alterations and errors in the technical data and specifications!) Gedpszgaa Ijfx Aiwekb For further questions, please feel free to contact us by phone.

Tilstand: god (brukt), akselkonfigurasjon: 3 aksler, tillatt aksellast (aksel 1): 10 000 kg, tillatt aksellast (aksel 2): 10 000 kg, tillatt aksellast (aksel 3): 10 000 kg, første registrering: 07/2015, total lengde: 9 070 mm, total bredde: 2 500 mm, fjæring: luft, akselavstand: 5 660 mm, farge: svart, Byggeår: 2015,

Tilstand: ny, FAS Conveyor System Roller Conveyors Roller Conveyor 2000/3000-510-450 RA2402 Further Information Manufacturer: FAS Type: Roller Conveyor Year of Manufacture: unknown Condition: good (used) Available conveyor lengths (CL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RW): 450 mm Nominal / outer width (NW): 510 mm Roller pitch: 62.5-125 mm, adjustable Drive type: center drive Conveyed goods weight: up to 30 kg Optionally available, e.g.: - Frequency converter for stepless speed adjustment - Supports - Side guides Price: Net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, expert advice, please feel free to contact us. Simply get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics Gkodpfswf I Ugex Aiwob

Tilstand: ny, FAS Conveyor System Roller Conveyors Roller Conveyor 2000/3000-510-450 RA2402 Gkedpfx Ajwf Naqoiwjb Further Information Manufacturer: FAS Type: Roller Conveyor Year of Manufacture: Unknown Condition: Good (used) Available Conveyor Lengths (FL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller Width (RB): 450 mm Nominal/External Width (NB): 510 mm Roller Pitch: 62.5–125 mm, adjustable Drive Types: Center Drive Conveyed Goods Weight: up to 30 kg Optional equipment available, e.g.: Frequency inverter for stepless speed control Supports Side guides Price: Net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg For individual, professional advice, please feel free to contact us. Reach out to us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics

Tilstand: brukt, FAS Conveyor System Roller Conveyors Roller Conveyor 3000-710-650 RA2403 Further Information Manufacturer: FAS Type: Roller Conveyor Year of manufacture: unknown Condition: good (used) Available conveyor lengths (CL): 3000 mm, 5000 mm, 6000 mm, 7000 mm, 8000 mm, 9000 mm, 10000 mm, 11000 mm, 12000 mm, 13000 mm, 14000 mm, 15000 mm, 16000 mm, 17000 mm, 18000 mm, 19000 mm, 20000 mm, 21000 mm Roller width (RW): 650 mm Nominal/outer width (NW): 710 mm Roller pitch: 62.5–125 mm (adjustable) Drive types: centre drive Conveyed goods weight: up to 30 kg Optionally available, for example: Gjdpfx Ajwf Nf Heiwokb Frequency converter for stepless speed regulation Supports Side guides Price: Net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply get in touch with us. Feel free to contact us by phone or e-mail. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics