Kjøp brukt Intos Fngj (132)

Tilstand: svært god (brukt), Vötsch Type: VT³ 4100 Water-cooled temperature test chamber S!MCON/32.NET (with touch panel) Control System Features: - Color touchscreen with intuitive menu navigation (typically 5.7" or larger) - Programming of temperature/humidity profiles with ramps and dwell times - Data acquisition and logging (e.g., temperature tracking, alarms) - USB port for data export (CSV, optionally S!MPATI-compatible) - Network interface (Ethernet) for remote monitoring and control - User management with password protection - Interfaces: Volt-free contacts, optionally Modbus or Profibus VT³ 4100 – Technical Specifications (Temperature Test Chamber) - Test volume: 990 liters - Temperature range: -40 °C to +180 °C - Temperature deviation over time: ±0.1 to ±0.5 K - Temperature deviation in space: ±0.5 to ±1.5 K - Temperature gradient: 1 to 3 K - Rate of temperature change (according to IEC 60068-3-5): - Heating: 4.0 K/min - Cooling: 3.0 K/min - Maximum heat compensation capacity: 4,500 W - Calibration values: +23 °C and +80 °C - Interior dimensions (W×D×H): 1100 × 950 × 950 mm - Exterior dimensions (W×D×H): 1390 × 1955 × 1995 mm Feedthroughs: The test chamber is equipped with feedthroughs on both the right and left sides. These allow measurement cables and test equipment to be routed into the test space. - 1 x L1 NW 50 mm - 1 x R1 NW 125 mm - 3 x R1 NW 50 mm Electrical connection: 3/N/PE AC, 400V ±10%, 50Hz Power consumption: 11.5 kW Rated current: 22 A Noise level: approx. 62 dB(A) Refrigerant: R452A Weight: 920 kg Important information for you as the buyer! Nodjygvm Eepfx Ac Necu The following points are performed in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If needed, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Upon successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to technical modifications and errors; specifications are subject to change!) Feel free to contact us by phone for any further questions.

Tilstand: ny, Byggeår: 2025, Flow Wrapper for high-speed packaging of smaller products into pillow bags with longitudinal seams. The flow pack packaging machine is suitable for packing single or multiple, dry, uniform or non-uniform products. A special feeding system is installed ahead of the flow wrapper. Sorting and feeding the products in line to the carriers (infeed table flow wrapper) is handled by the six servo-driven side belts. This eliminates the need for manual placement of each individual product, which significantly boosts production efficiency and contributes considerably to the flow wrapper's economic benefits. AMTEC’s flow pack packaging machine is optimally matched to the bag length regarding the rotating knives and their diameter, ensuring speed optimization as a result. — Specifications: Suitable product dimensions: L (depending on bag length) x W (15-60) x H (5-30) mm; Bag dimensions: L (70-200) x W (15-60) x H (5-30) mm; Number of rotating knives: 2; Max. machine cycle rate (idle): 400 cycles/min; Film type: BOPP/OPP (transparent, printed, or laminated); Power: 380V, 9.5kW; Machine dimensions: L9734 x W1110 x H1924 mm; Weight: 3500 kg. Nedev Nli Djpfx Ac Nocu Please note that our new prices frequently undercut typical used equipment prices. Feel free to inquire and tell us about your packaging requirements. — We usually have 30–50 different new machines available from stock for immediate delivery. Lead times for custom-manufactured machines are also very short, starting from around 3 weeks. — All machines come with full warranty.

Tilstand: ny, Byggeår: 2025, Flow Wrapper for high-speed packaging of smaller products into pillow bags with longitudinal seams. The flowpack packaging machine is suitable for packaging single or multiple, dry, uniform or non-uniform products. A specialized feeding system is installed upstream of the Flow Wrapper. Sorting and single-line feeding of products to the carriers (infeed conveyor of the Flow Wrapper) is performed by the 6 servo-driven side belts. This eliminates the need for manual single placement of products, providing a significant production advantage and contributing considerably to the cost-effectiveness of the Flow Wrapper. AMTEC’s flowpack packaging machine is precisely optimized for bag length with regard to the rotating knives and their diameter, optimizing speed as a result. – Specifications: Suitable product dimensions: L(depending on bag length)xW(15-60)xH(5-30)mm; Bag dimensions: L(70-150)xW(15-60)xH(5-30)mm; Number of rotating knives: 3; Maximum machine cycle rate (idle): 600 cycles/minute; Film type: BOPP/OPP (transparent, printed or laminated); Power: 380V, 9.5kW; Machine dimensions: L9734xW1110xH1924mm; Weight: 3,500kg Ncjdev Nlkbspfx Ac Neu Please note that our new equipment prices are often lower than typical used prices. Feel free to inquire and let us know your packaging requirements. – We generally have 30-50 different new machines available from stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from approx. 3 weeks. – All machines are available with a full warranty.

Tilstand: svært god (brukt), Byggeår: 2018, EMCO Concept MILL 55 Year of manufacture: 2018 With tool changer PC-controlled 3-axis universal milling machine for basic CNC training using various industry-standard controllers. Machine supplied complete with full enclosure and safety devices in accordance with CE regulations, infinitely variable main drive, automatic referencing, machine lamp, electrical and mechanical provisions for automation, PC interface card, PC-to-machine connection cable, data carrier with machine parameters, operating tool set, operation manual with spare parts list. Njdpfx Acowkpzls Nscu The interchangeable control system Unique to the Concept series is the interchangeable control system, which can be integrated into all Concept machines. Users can be trained on a single machine with all commonly used industrial CNC controls. Currently, up to eight different controls can be learned. The result: CNC technicians are flexibly deployable. This is a decisive advantage for both professionals and companies. Working area • Travel in X-axis: 190 mm • Travel in Y-axis: 140 mm • Travel in Z-axis: 260 mm • Min. distance spindle nose – table: 77 mm • Max. distance spindle nose – table: 337 mm Milling table • Table dimensions (L x W): 420 x 125 mm • T-slots: number, width, spacing: 2 x 11 x 90 mm • Max. table load: 10 kg Milling spindle drive • Speed range: 150 – 3,500 rpm • Power of three-phase asynchronous motor: 0.75 kW • Spindle torque: 3.7 Nm Axes • Feed rate: 0 – 2 m/min • Max. feed force X/Y: 800 N • Max. feed force Z: 1,000 N • Mean positioning deviation to VDI 3441 in X/Y: 0.008 mm • Mean positioning deviation to VDI 3441 in Z: 0.008 mm Tool system • Number of tool stations: 8 • Tool selection via directional logic • Max. tool diameter: 40 mm • Max. tool weight: 1 kg Scope of delivery: Emco Concept Mill 55 with tool changer Cables Easy2Operate WinNC Sinumerik Operate Base frame Leveling elements I/O extension Pneumatic extension Automatic door Pneumatic vise Robotic interface DNC interface W-holder package

Tilstand: ny, Byggeår: 2024, effekt: 0,75 kW (1,02 hk), SCHORR Electric High-Lift Pallet Truck, 1200 kg Capacity -- Various lift height options available (2500mm, 3600mm) -- Fully electric & self-propelled with multiple driving modes -- Cost-effective alternative to purchasing a forklift -- Low-maintenance, smooth operation, and easy to use -- 24 V 80 Ah AGM batteries (maintenance-free) -- Integrated charger for convenient recharging -- High-quality CURTIS controller (waterproof) -- Secure footing thanks to electromagnetic brakes -- Sturdy chassis and robust metal cover ensure high stability -- High-performance hydraulic pump Prices by lift height / version: -- 2500mm lift height: €2,836 -- 3600mm lift height: €3,239 The SCHORR electric high-lift pallet truck offers a load capacity of 1200 kg and achieves (depending on version selected) a lift height of up to 2500mm or up to 3600mm. Thanks to its robust construction, stable chassis, and durable metal cover, the unit guarantees excellent stability and longevity. The centrally positioned control instruments such as the battery charge indicator, emergency stop switch, and key are easily accessible and within direct view of the operator. With a compact turning radius, the high-lift pallet truck is extremely maneuverable, allowing you to navigate effortlessly even in the tightest spaces. An integrated 24 V/10 A charger allows you to recharge the electric pallet truck with ease. In addition, the truck uses a maintenance-free 24 V/80 Ah AGM battery. You can simply plug the unit into a standard 230V socket for charging. In addition to the normal drive speed of approx. 4.2 km/h, there is a "turtle" or "creep" mode. This function lets you reduce your driving speed for precise manoeuvring, for example, when handling sensitive goods. With its safety-focused design and integrated steel reach-through guard, the truck provides optimal protection for you and your staff during operation. Electromagnetic brakes ensure a secure stand, providing maximum stability during your transport tasks. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer type designation: RR12HHE3 Load capacity: 1.2t Model: 250E // 360E Own weight incl. batteries: 455kg // 489kg Drive: Electric Tyres: Polyurethane Basic Dimensions Overall length: 1706mm Overall width: 925mm Length including fork back: 556mm Lift: 2500mm // 3600mm Mast height retracted: 1820mm // 2370mm Mast height extended: 3035mm // 4130mm Fork dimensions DIN ISO 2331: 60mm x 170mm x 1150mm Fork outside distance: 570mm Aisle width with 800x1200 long-side pallets: 2180mm Turning radius: 1415mm Njdpfx Aeqv D Husc Njcu Performance Travel speed laden/unladen: 4.0 km/h / 4.5 km/h Lifting speed laden/unladen: 0.10 m/s / 0.15 m/s Lowering speed laden/unladen: 0.12 m/s / 0.10 m/s Max. gradeability laden/unladen: 3% / 10% Would you prefer to finance or lease this unit? No problem! We also offer attractive options for this. Simply contact us and we will be happy to advise you on the different possibilities. We look forward to your inquiry! If you have any further questions about our pallet trucks, SCHORR is happy to assist. You can reach our expert team by phone or email. We look forward to hearing from you and supporting you with advice.

Tilstand: ny, effekt: 6,77 kW (9,20 hk), Byggeår: 2024, SCHORR belted dumper RR500DHKASH PRO – Discover the advantages: - 9.2 HP four-stroke engine - Self-propelled & powerful track drive - Hydraulic shovel for self-loading - Hydraulic scissor lift (dump height 1.44m) - 500kg payload - Large & high-quality skip with wide tipping angle - Folding operator platform, standard - 6+2 gears The SCHORR belted dumper RR500DHKASH is equipped with hydraulic skip drive and offers a payload of 500 kg powered by a robust 9.2 HP single-cylinder 4-stroke petrol engine. Key features of the RR500DHKASH are the hydraulically controlled scissor lift function and self-loading bucket. This allows you to easily load material and tip it up to a height of 1.44m – ideal for unloading into trailers, containers, or other elevated surfaces. Nodpjttg Udefx Ac Njcu Thanks to its slim design (825mm), the mini dumper can also pass through narrow paths, making it an extremely flexible transport solution. With a powerful track drive, it can handle rough terrain, inclines, and kerbs with ease. The rubber tracks provide a secure grip in any work environment. Raising and lowering the skip/container is effortless thanks to the hydraulic drive – even under full load. Featuring a robust skip made from thick steel plate and a straight outlet for fast, easy discharge, this dumper is a must-have for anyone needing to transport heavy loads. Even tipping on shallow inclines is no problem. The large tipping angle ensures full emptying, even with fully loaded skips, without the need for manual assistance. This saves time and effort, making this motorised wheelbarrow indispensable for those who value efficiency and performance. TECHNICAL DATA: Manufacturer (abbreviation): SCHORR Manufacturer model: RR500 Model: DHKASH Payload capacity: 500kg Tipping drive: Hydraulic (stepless) Drive system: Track Weight without/with packaging: 439 / 464kg Drive Engine: Air-cooled 1-cylinder four-stroke engine (OHV) Starter: Recoil starter Power: 9.2 HP Gearbox: 6 forward / 2 reverse gears Speed Forward: max. 8 km/h Reverse: max. 5 km/h Basic dimensions Overall length platform folded: 2320mm Overall length platform unfolded: 2520mm Overall width (incl. bucket): 825mm Overall height retracted/extended: 1230 / 1620mm Overall height at max bucket tilt (90°) retracted/extended: 1780 / 2400mm Container dimensions (internal): 740 x 665 x 435mm Container dimensions (external): 1060 x 710 x 520mm Bucket dimensions (internal): 650 x 320 x 300mm Track width: 710mm Load volume (liquid): approx. 200L Load volume (heaped): up to 370L (depending on load) Filling height Side: 1030mm Front: 810mm Discharge height min./max.: 810 / 1440mm Would you prefer to finance or lease the equipment? No problem! We also offer attractive options for this. Just contact us, and we will advise you on various solutions. We look forward to your enquiry! The SCHORR team will be happy to answer any questions regarding our pallet trucks. Our knowledgeable staff are available by phone or email. We look forward to hearing from you and assisting you with your enquiry.

Tilstand: ny, Byggeår: 2025, Funksjonalitet: fullt funksjonell, laser effekt: 20 W, 19" Integrated System – Model 2025 – The marking champion among laser engravers! Laser Class 4 Metals – Plastics and much more! • EZCAD 3 (true 64-bit card) with up to 4 axes • Intel i5 or AMD Ryzen with 32 GB RAM and ultra-fast M.2 SSD, integrated into the 19" rack-mount housing • 23” TFT screen for fatigue-free working • Windows 11 Professional 64-bit installed • Professional JPT MOPA fiber laser source with 20 watt power and up to 600 kHz (optional: variable pulse width and up to 200W for color marking and cleaning) • “DigiScan Eco 10” scanner unit for high-fidelity detail and precision • Scan area approx. 100 x 100 mm (optional: 150/200/300 mm) • 19" aluminum rack housing • 2 m fiber optic cable incl. laser head mount for easy installation • Professional marking software in German • Barcode and QR code support • Serial number function • Batch scanning from Excel files, network, or database! • Laser parameter finder via matrix for 2 parameters (e.g., frequency vs speed, frequency vs power) • TCP/IP connectivity. Various commands can now be transmitted via TCP protocol directly to the software. This enables easy integration of external components such as camera-based position detection, etc. • Industry 4.0 – the system status can be processed at any time via the TCP/IP protocol • Optically isolated input and output ports for automation (24V PNP logic) • New look & feel. A fresh design for even clearer and easier operation • 3D preview for rotary axis processing • Performance boost up to 50% thanks to 64-bit technology • Improved stability due to the latest drivers • Optionally control up to 4 axes WITHOUT switching via PLUGINs • DEEP engraving function (slicer software for Z-axis control) • New, optimized hatch algorithms for highly efficient marking • New generation of galvanometers (Eco, Hi-Speed & 3D) with dual laser pointers for visual focus position check • Provision for external fume extraction Nsdpfx Aceuxnwmo Nocu • Start button and emergency stop (E-stop) on the housing, as well as external connection for X, Y, Z, and A axes • Operating manual and user software in German Optional features include: → Enclosure for Laser Class 1, available either as bench-top or floor-standing model with castors and space for extraction → IPG or SPI fiber laser sources in various power ratings → LED status bar (green/yellow/red) → Scanlab equipment → Suitable fume extraction systems → Automation for loading, conveyors, and much more! → 3D marking and engraving functionality → Automatic focus adjustment via specialized laser sensor → Rotary units in various designs → Motorized stages in X and Y → Interlock system for marking without protective housing, but solely with PPE (personal protective equipment) for bulky workpieces Includes training at our training center in Schweinfurt! Our engraving lasers are manufactured at our Schweinfurt facility! Therefore, individual customization is always possible! → Made in Schweinfurt! Images may show optional extras! We are your partner for laser engraving machines and laser markers. Whether you require manual or fully automatic laser marking systems, we are happy to provide a quotation.

Tilstand: klar til bruk (brukt), Byggeår: 2006, Funksjonalitet: fullt funksjonell, driftstimer: 12 666 h, effekt: 12 kW (16,32 hk), MACHINING CAPACITIES: - X (U) travel for vertical milling: 3875 mm, between stops 3170 mm - Y (V) travel for milling: 1390 mm between stops, for drilling: 1201 mm - Z (W) travel for milling: 290 mm Maximum workpiece height (thickness), effective stroke: 110 mm Additional information: see the travel diagram per aggregate - Maximum traverse speeds X (U) axis: 60 m/min Y (V) axis: 50 m/min Z (W) axis: 20 m/min MACHINE CONFIGURATION: - Work table with 6 mobile support beams, including several vacuum blocks and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm 6 rear stops 6 intermediate stops 3 right-side stops 3 left-side stops 4 lifting bars (for loading/unloading assistance) Table divided into 2 work zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter - Pfannenberg cooling unit 1.7kW - Chip conveyor belt - X movement via rack and pinion, Y & Z movement via screw and nut (High-precision linear guides with automatic lubrication) - Aggregates on cantilever arm composed as follows: • Milling/Routing unit 12 kW HSD - Tool holder type: HSK 63 F - Variable speed 6000 - 24000 rpm Controlled by frequency converter - Perimeter extraction hood - Integrated tool magazine with 10 positions + 12-position tool changer • Drilling unit with 11 spindles, 1.7 kW - Centre distance between spindles: 32 mm - Rotation speed: 4000 rpm - 11 vertical spindles (8 in the X axis, 3 in the Y axis) - 2+2 horizontal spindles in X - 1+1 horizontal spindles in Y • Control console - Windows PC - Network card and Ethernet connection - Programmes (Software): Masterworks and user manual Ncodpfxjy Nb Tke Ac Nou DXF conversion and direct execution of ISO, TLF, DXF Pre-programmable zones Remote control OTHER CHARACTERISTICS: - Main power supply 400V, 3Phases+N+PE, 50Hz Rated current 58.6A, 46.6 KVA - Pneumatic supply 7/8 Bars - Average consumption 100Nl/min - Extraction system: Lower ports Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h, speed 20 m/s - CE marking, safety zone and protective guard Lockable disconnect switch, emergency stops Overall footprint in operating order: see diagram Footprint for transport: to be specified when preparing the equipment Total estimated weight: 2400+350+350 kg Please consult us for the supply of consumables, accessories, and/or extraction systems. Included: original documents, manual, spare parts list, electrical and pneumatic diagrams, service keys, software, and license keys.

Tilstand: svært god (brukt), Byggeår: 2008, maskin-/kjøretøynummer: 0803024, Funksjonalitet: fullt funksjonell, 4-SIDED PLANER MOULDER 5 TOOL-HOLDING SPINDLES WITH REINFORCED MOTORS & CHROMED TABLE 3.00 M Brand: LEADERMAC Type: SMARTMAC 523 Model: LMC-523SU Serial No: 0803024 Year: 2008 (Photos taken prior to overhaul & cleaning) MACHINING CAPACITIES: - 4-sided planer and moulder - Max section: 130 x 230 mm - Thicknesses: 10 to 130 mm - Widths: 15 to 230 mm - Minimum length single piece: 600 mm > 760 mm when using the universal spindle - Adjustable cutting depth: max 10 mm - Spindle rotation speed: 6000 rpm PLANER/MOULDER CONFIGURATION: - Heavy-duty fabricated steel frame - Full panoramic, soundproofed safety hood on gas struts with internal lighting - Digital counters (Siko type) for precise manual settings per operation - Elevated operator-facing control panel - Cast iron infeed table (LxW): 2980 x 255 mm Table height from floor: 900 mm - Lateral spring infeed pressure device - Digital depth indicators 1) Planer spindle 7.5 kW Tool holder Ø125 x L.230 mm 2 & 3) Right & left vertical spindles 12 kW Tool holders Ø125 x L.130 mm 4) Independently adjustable top horizontal spindle 11 kW Tool holder Ø125 x L.230 mm - Adjustable pressure shoe at outfeed Njdpfx Acsv Tzw Ej Necu 5) 360° universal spindle 11 kW Spindle Ø50 x L.240 mm - Vertical idler-wheel pressure feed FEED SYSTEM: - Feed with inverter: 6 to 24 m/min Feed motor: 3 kW - Steel helical infeed roller built into table Cardan-shaft drive - 7 pneumatically loaded pressure rollers 2 steel knurled rollers 3 (1 retractable)+2 rubber-coated rollers - One smooth steel roller on the outfeed table at planing exit OTHER FEATURES: - Main power supply: 400V 3-phase + E, 50 Hz - Installed power: 53 kW (72 HP) IN 95.6A - Automatic star-delta starting - Braked motors - Toothed belt drive - Electric thickness adjustment via powered up/down beam (0.37 kW motor) - Spindle diameter: Ø50 mm - Minimum working pneumatic pressure: 6 bar - Extraction: 5 x Ø120 mm Recommended air flow 6100 m³/h Air speed: 20 to 28 m/sec according to wood moisture - CE Marked - Lockable isolator, Emergency stop buttons Machine footprint (operational W x H): 3000 x 2250 mm Overall dimensions: 5100 x 2000 x H.1810 mm Weight: 4300 kg Machine supplied with fitted sharpened cutters, manual, spare parts list, and diagrams. Please contact us for provision of consumables, accessories and/or dust extraction systems. On order, the machine will be overhauled, brought up to standard, with dynamic functional inspection and test. With 3-month warranty & certificate of compliance. Price ex works, VAT not included. Delivery and additional services upon request.

Tilstand: god (brukt), Byggeår: 2001, Funksjonalitet: fullt funksjonell, Portal machining center for HSC milling Njdpfx Asvri Nmsc Necu The machine operates within a Röders RCM Automation system, making it suitable for integration into an automated production environment. Technical specifications: - Travel ranges: X 800 mm, Y 600 mm, Z 400 mm - Drive power: 17 kW - Spindle speed: 36,000 rpm – Fischer motor spindle - Spindle taper: HSK E50 - Feed rate: up to 60 m/min Worktable - Dimensions: 900 mm x 700 mm - Max. workpiece weight: 800 kg Control system - Röders HSC RMS6, including software for: Milling simulation and pocket machining - Electronic handheld pendant and mouse - Ethernet interface integrated in Windows NT - Remote maintenance for the RSM 6 machine control Machine design - Portal construction with temperature stabilization of the machine frame Tool changer - 30 positions with collision monitoring Equipment - Cooling unit for milling spindle - Infrared measuring probe for automatic: Tool length correction, diameter measurement, and tool breakage detection - Microjet spray cooling and lubrication device - Fixed bearing and spindle nuts water-cooled - Full safety enclosure (crane loading possible) - Connection for work area extraction - 2 screw-type chip conveyors - Workpiece cleaning via separate air nozzles Machine data - Footprint (excluding service areas): approx. 3,100 mm x 3,000 mm x 3,200 mm (LxWxH) - Weight: approx. 13,000 kg - Connected load: 400V, 50/60 Hz, 3 phases The machining center is in good condition. Maintenance and repair work have been carried out regularly. A demonstration under power and with material can be arranged by appointment. All tools and equipment visible in the photos are not included in the scope of delivery. Technical modifications and errors excepted.

Tilstand: svært god (brukt), Leybold Type: Trivac D 40 B The TRIVAC B series consists of oil-sealed vacuum pumps operating on the rotary vane principle. The oil injected into the compression chamber serves the purposes of sealing, lubrication, and cooling. The pump body is assembled from individual components without sealing elements. These components are pinned to ensure easy disassembly and reassembly. Ultimate pressure: 2 x 10⁻³ mbar Njdpfxsvx Tdue Ac Nscu Motor: 3-phase, 230/400 V, 50/60 Hz Pumping speed (50 Hz): 40 m³/h Pumping speed (60 Hz): 48 m³/h Environmentally friendly: Quiet operation Vibration-free running Energy-saving Energy-saving: Low power consumption Minimal heat emission Modern vacuum technology: High pumping speed right up to ultimate pressure Low ultimate pressure, even with gas ballast High water vapor tolerance Suitable for continuous operation at up to 1000 mbar Built-in oil pump, forced-lubricated plain bearings Minimal air intake High leak tightness (4He-compatible) Technical data: Product: TRIVAC D 40 B Inlet flange: DN 40 ISO-KF Exhaust flange: DN 40 ISO-KF Nominal pumping speed at 50 Hz: 46.0 m³/h Nominal pumping speed at 60 Hz: 55.0 m³/h Pumping speed at 50 Hz: 40.0 m³/h Pumping speed at 60 Hz: 48.0 m³/h Ultimate partial pressure without gas ballast: 1.0 x 10-4 mbar Ultimate total pressure without gas ballast: < 2.0 x 10-3 mbar Ultimate total pressure with gas ballast: < 5.0 x 10-3 mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Oil fill quantity: min.: 1.7 l max.: 2.6 l Sound level according to DIN 45 635 without gas ballast: 57 dB(A) with gas ballast: 59 dB(A) Power supply: 3-phase, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-phase, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 rpm Motor speed at 60 Hz: 1,735 rpm Motor protection class: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Condition: used Scope of delivery: (see image) (Data subject to change and errors excepted!) Please feel free to contact us by phone for further questions.

Tilstand: svært god (brukt), Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The unit is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds up to 30 hours. Conforms to DIN VDE 0470 T1 and EN 60529 for testing according to protection classes IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Exchangeable oscillating pipes - Swivel-mounted and replaceable nozzle holders - Adjustable and monitored water flow rate - Control of test duration Mechanical Load Data: - Maximum test specimen load (evenly distributed): - Permissible test specimen weight for carrier (total): 25 kg - Spray radius: 200 mm / 400 mm IP Protection Class Test Data: - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ±60° - Oscillation angle IPX4: approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm Nodpfsvzz A Rjx Ac Njcu - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and information reserved!) For further questions, we are happy to assist you by phone.

Tilstand: svært god (brukt), G.i.N. Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent Data Logger GL5350 Performance Meets Intelligence Upcoming vehicle generations are increasingly equipped with intelligent driver assistance systems, complex multimedia components, and autonomous driving systems. These complex, networked technologies generate ever larger data volumes, making troubleshooting during the development phase more demanding and complex. To shorten test drives, reduce their number, and still meet the testing requirements of all specialist departments, the advantages of an intelligent and high-performance data logger such as the GL5300 series come into play. The GL5300 Series covers synchronous recording of LIN/CAN & CAN FD bus systems across FlexRay networks up to Ethernet networks (TCP-/UDP-/DLT-/ADB- and Ethernet Raw Logging). This series also offers connection of up to 8 cameras and up to 5 GLX504 modules for an additional 20 CAN FD channels with SIC transceiver, as well as up to 3 GL5450 modules for synchronous recording of up to sixty 100-Base-T1 (30 taps) and up to eighteen 1000-Base-T1 lines (9 taps). Residual bus simulation Classifier device Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on FlexRay, XCP on Ethernet Transmission of any freely configurable messages Selective recording (extensive trigger and filter conditions) Data transfer via LAN/WLAN, USB, and cellular Operation via menu control Technical Data: GL5300 Configuration GL5350-8H-1R3L CAN interfaces: CAN 2.0: 16 CAN FD: 4 LIN interfaces: 5 RS-232 interfaces: 7 Analog inputs (10 bit): 4 Operating voltage: +7 V to +50 V Power consumption at 12 V: typ. 10.3 W Current draw at 12 V: in sleep mode: < 2 mA in standby mode: typ. 180 mA in operation: typ. 860 mA Operating temperature range: -40°C to +70°C Housing: Side profile material: Al Mg3 Cover: EN AW-6060 (AlMgSi0.5) T66 Trim: ABS Nodpfet R R Uwsx Ac Nocu Dimensions (LxWxH): 212 x 290 x 80 mm Weight: ~3500 g Condition: used Scope of delivery: (see image) (Technical data subject to change and errors excepted!) We are happy to answer any further questions by phone.

Tilstand: svært god (brukt), Vötsch Type: VC 7018 Vötsch Climate Test Chamber VC 7018, Water-Cooled Control Panel »Touchpanel« All control and operation commands can be triggered by simply touching the functional icons on the touchpanel. Adjustment Feet To compensate for uneven flooring and ensure sufficient ventilation of the machine section, the test chamber is equipped with adjustable feet. Cable Ports The chamber is equipped with cable ports on both the right and left side. These allow measuring lines and test devices to be passed into the test chamber. Standard cable ports pre-installed: R1: NW 125 mm L1: NW 50 mm Test Chamber Dimensions: Width 580 mm x Depth 450 mm x Height 750 mm Housing Dimensions: Width 870 mm x Depth 1280 mm x Height 1745 mm Specifications for Temperature Tests: Temperature range: -70°C to +180°C Temporal variation: ±0.1 to ±0.5 K Spatial variation: ±0.5 to ±2.0 K Temperature change rate (per IEC 60068-3-5): Heating: 4 K/min Cooling: 2.3 K/min Specifications for Climate Tests: Temperature range: -10°C to +95°C Humidity range: 10% to 98% r.H. Temporal temperature deviation in chamber center: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Temporal humidity deviation in chamber center: ±1 to ±3 % r.h. Electrical Connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 5.9 kW Rated current: 12.0 A Connection cable: 3.5 m Protection: 16 A slow, provided by customer Refrigerants: R-404A and R-23 Test chamber volume: approx. 190 liters Net weight: approx. 460 kg Nsdpewgaykjfx Ac Nocu For your safety as a buyer, please note the following information! The following points are carried out on all our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New refill with legally compliant refrigerant, if required 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) We are happy to answer any further questions by phone.

Tilstand: god (brukt), Vötsch Type: VCS 7130-15 Vötsch Climate Test Chamber, Water-Cooled Data for Temperature Testing: Temperature range: -70°C to +180°C Temporal temperature deviation at chamber center: ±0.3 to ±0.8 K Spatial temperature deviation: ±0.5 to ±2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 16 K/min Cooling: 14.5 K/min Data for Climatic Tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98 % RH Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1 K Temperature gradient: 1 to 2 K Humidity fluctuation (temporal, chamber center): ±1 to ±3 % RH Heating compensation: max. 8000 W Cabinet Dimensions: External dimensions with hinges and door lock: Height: 1995 mm, Width: 1680 mm, Depth: 1855 mm External dimensions without hinges and door lock: Height: 1995 mm, Width: 1300 mm, Depth: 1855 mm Internal dimensions: Height 950 mm, Width 1100 mm, Depth 950 mm Test chamber volume: approx. 1300 liters Access Ports: On both right and left sides, the test chamber is equipped with access ports. These allow measurement lines and test devices to be routed into the test chamber. 1 x R1 NW 125 mm 1 x R1 NW 140 mm 1 x L1 NW 50 mm Nodpfx Acjwvgwbj Nscu Test Chamber Lighting: Halogen bulb 24V, 50W Electrical Data: 3/N/PE AC 400V ±10% 50Hz Rated power: 44.0 kW Rated current: 63.0 A Site fuse: 100 A slow-blow Max. heat output to ambient: 2.2 kW Permissible Test Load: Total rack support load: 100 kg Test chamber floor: 150 kg, Insert rack: 50 kg Refrigerant: R 404A/R 23 Weight: 1900 kg Information for your safety as a buyer! The following steps are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. Refrigerant refill conforming to legal requirements (if necessary) 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information subject to confirmation!) If you have further questions, we will be happy to answer them by phone.

Tilstand: svært god (brukt), Weiss Ncedpfx Acsxxuyto Nou Type: SWT 200/400-S Weiss Spray and Splash Water Test Chamber This unit is designed to test the ingress of water into enclosures. With the addition of a time switch, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Conforms to DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel-mounted and replaceable nozzle holders - Adjustable water flow rate with measurement - Programmable test duration control Mechanical load data: Max. load for test specimen (evenly distributed): Permissible specimen weight for test holder (total): 25 kg Spray radius: 200 mm / 400 mm Data for IP protection class testing: Oscillation speed: approx. 60°/s Oscillation angle IPX3: approx. ±60° Oscillation angle IPX4: approx. ±180° -10° Dimensions: External dimensions incl. control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm External (D x W x H): approx. 1000 x 1000 x 1900 mm Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 1.5 kW Rated current: 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photos) (Specifications are subject to change and errors reserved!) For further questions, we would be pleased to assist you by phone.

Tilstand: svært god (brukt), Weiss Type: WK3-340/70 Weiss Climate Test Chamber, Air-Cooled Control Unit: "Touch Panel" All control and operation commands can be executed by simply touching the function icons on the "Touch Panel" control unit. Adjustable Feet To compensate for floor unevenness and to ensure adequate ventilation of the machinery section, the test chamber is equipped with adjustable feet. Cable Ports The test chamber is equipped with cable ports on both the right and left sides. These allow signal cables and testing devices to be routed into the test space. The following ports are installed as standard: R1: Internal diameter 125 mm L1: Internal diameter 85 mm Volume: 335 liters Test Chamber Dimensions: Internal: Height 750 mm, Width 580 mm, Depth 765 mm External: Height 1775 mm, Width 870 mm, Depth 1600 mm Specifications for Temperature Testing: Minimum Temperature: –72°C Maximum Temperature: +180°C Time Deviation: ± 0.1 to ± 0.5 K Spatial Homogeneity: ± 0.5 to ± 1.5 K Temperature Change Rate (Cooling): 3 K/min Temperature Change Rate (Heating): 3 K/min Specifications for Climate Testing: Temperature Range: +10°C to +95°C Dew Point Range: –3°C to +94°C Humidity Range: 10 to 98% r.h. Time Deviation: ± 0.1 to ± 0.3 K Spatial Homogeneity: ± 0.5 to ± 1 K Temporal Humidity Deviation: ± 1 to ± 3% r.h. Operational Specifications: Test Chamber Lighting: Halogen bulb 2 x 24V, 50W Rated Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Current: 16 A Nominal Power: 4.9 kW Circuit Protection (customer side): 16 A slow-blow Refrigerants: R-452A/R23 Weight: approx. 585 kg Important safety notice for buyers! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certification 4. After successful inspection, the chambers are subject to a documented test run. Condition: used Nodpsv Sr Hzsfx Ac Njcu Scope of delivery: (see photo) (Specifications and technical data subject to change and error!) Further questions? We will be happy to answer your call.

Tilstand: svært god (brukt), Type: SWT 200/400-S Ncsdpfxsxg Hrke Ac Neu Weiss Spray and Splash Water Test Cabinet This unit is used to test for the ingress of water into enclosures. When used in conjunction with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds up to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system minimizes water consumption. Features: - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swiveling and replaceable nozzle holders - Adjustable and monitored water flow rate - Programmable test duration Mechanical load data: - Maximum test load (evenly distributed): - Permissible specimen weight for test carrier (total): 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests: - Oscillation speed: approx. 60°/s - Oscillation angle IPX3: approx. ±60° - Oscillation angle IPX4: approx. ±180° -10° Dimensions: - External dimensions incl. control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and information!) For further questions, we are happy to assist you by phone.

Tilstand: ny, Byggeår: 2025, Diameter: 28 mm Length: 75 mm Clamping range: 70–75 mm Price is exclusive of statutory VAT. Also available as D28 x 50 mm (clamping range 45–50 mm). The clamping range is between 70–75 mm. Nodeuia Ngopfx Ac Nocu Type: Ball Lock Pin 75 mm Diameter: 28 ± 0.02 mm Material: 45# steel Hardness: HRC28–32 Surface roughness: Ra 0.8 µm GERD WOLFF ball lock pins are specialized fastening elements designed for integration into various welding table systems and fixtures. Their primary function is the efficient and precise positioning and securing of workpieces. These pins are compatible with all brands of welding tables featuring a 28 mm diameter borehole. The unique ball design allows flexible alignment of workpieces at various angles and positions. Due to their high-quality finish and robust construction, GERD WOLFF ball lock pins provide reliable holding force throughout the entire welding process. These pins ensure easy handling, quick clamping, and release of workpieces without the need for additional tools. GERD WOLFF stands for quality and precision in welding technology, and the ball lock pins are engineered to meet the demanding requirements of welding applications. Ball lock pin D28, clamping pin 28 mm, ball clamping mechanism 75 mm, precision pin D28, clamping tool 75 mm, industrial clamping technology D28, clamping fixtures 75 mm, ball clamping technology D28, locating pin 28 mm, clamping systems 75 mm, bolt clamp 28 mm, tool clamping pin 75 mm, assembly technology D28, ball clamping tools 28 mm x 75 mm Quick release locking pins, quick lock pins, quick releases, quick installation pin, metal horizontal quick release, work pin, quick release locking pin, quick latch pin, locking quick release pins

Tilstand: klar til bruk (brukt), ID - 6SN1123-1AB00-0BA1 SN - GWE-566018901080 Weight: 3 kg Height: 29 cm Length: 48 cm Width: 5 cm The Siemens 6SN1123-1AB00-0BA1 is a high-performance module from the SIMODRIVE 611 series for servo drives. This module is designed for the operation of two axes and offers a maximum current rating of 25 A. It is equipped with internal cooling, ensuring optimal performance and service life. Its construction makes it ideal for demanding industrial applications, enabling reliable and precise control of both AC and DC motors. Thanks to its compact design and dimensions of 29 cm in height, 48 cm in length, and 5 cm in width, the module can be easily integrated into existing systems. You can rely on the proven quality and performance of the Siemens 6SN1123-1AB00-0BA1 module to effectively meet your automation requirements. For detailed technical information, specifications, and application notes, I recommend contacting Siemens directly or an authorized Siemens distribution partner. They can provide the required information and assist you with any questions regarding configuration and use of this specific product. Njdeud Impspfx Ac Nocu All technical information is provided without guarantee.

Tilstand: klar til bruk (brukt), Funksjonalitet: fullt funksjonell, The Carnitech C400 Grinder is designed to meet the demands of industrial users requiring efficient and consistent grinding for large volumes. Once integrated into a production line, it enables precise processing of raw materials while ensuring a homogeneous texture. As such, it is perfectly suited for food processing facilities that demand reliability and consistency. Thanks to its robust construction, the Carnitech C400 Grinder guarantees stable operation even under intensive use. It supports a continuous throughput with no variation in quality, simplifying production flow management. As a result, operators benefit from a tool capable of minimizing waste and improving the consistency of finished products. Additionally, integration into an existing line is straightforward, whether positioned upstream or downstream of other processing equipment. Nedpfsyw R Eljx Ac Necu Furthermore, this machine is distinguished by its ability to process various product types while maintaining constant performance. At the same time, its design is optimized for easy maintenance, reducing downtime and enhancing overall equipment availability. As a refurbished used machine, it provides a cost-effective solution while maintaining high industrial efficiency. The Carnitech C400 Grinder therefore supports optimized production, helping to increase productivity while ensuring consistent quality, making it a strategic piece of equipment for demanding industrial clients. Technical specifications: Power: 110 kW Grinder for frozen meat Dimensions: 3000 mm x 1550 mm x 2660 mm (L x W x H) Screw diameter: 400 mm

Tilstand: klar til bruk (brukt), Funksjonalitet: fullt funksjonell, The Seydelmann MU200 B grinder is engineered to meet the rigorous demands of industrial food processors in grinding and mixing applications. Once integrated into a production line, it ensures homogeneous processing of raw materials while maintaining consistent final product quality. Therefore, it is perfectly suited for facilities handling fresh, frozen, or cooked meats, as well as other food preparations. Thanks to its combined grinding and mixing system, the Seydelmann MU200 B significantly enhances texture consistency. In practice, the product is first uniformly mixed before being ground, optimizing the distribution of ingredients and minimizing quality variations. As a result, processors benefit from a more stable end product, while reducing material loss and rework. Moreover, this configuration supports a continuous workflow, which eases the management of high production rates. The machine further distinguishes itself through its robust build, specifically designed for intensive industrial use. The components are housed within a closed stainless steel structure, ensuring a high standard of hygiene and simplifying cleaning. Additionally, the secured design reduces intervention risks during operation, reinforcing operator safety. As a reconditioned used machine, it provides an excellent compromise between industrial performance and cost control. Ultimately, the Seydelmann MU200 B is aligned with optimized production strategies, where precision, reliability, and operational continuity are paramount. It thus boosts productivity while ensuring consistent quality, making it a strategic asset for food processing lines. Technical specifications: Model: MU 200 B Year: 2006 Ncedpoyw Rxrsfx Ac Neu Power supply: 400 V Frequency: 50 Hz Motor power: 25 / 37 kW Plate diameter: 200 mm Throughput: up to 6,000 kg/h Hopper capacity: 300 L Mixing capacity: 150 kg Weight: 1,000 kg

Tilstand: brukt, LCV-54 Horizon shingling delivery, used The Horizon LCV-54 shingling delivery is an efficient and precise solution for the delivery of folded print products, specifically designed for use with Horizon folding machines. Ncsdpfxsw Ew Amj Ac Nsu Special Features - Shingling delivery: The LCV-54 provides uniform and orderly shingled delivery of folded products, facilitating downstream processing and increasing efficiency - Height adjustable: Flexible adjustment of the infeed height allows for optimal integration into various production environments - Wide compatibility: The LCV-54 is compatible with all Horizon AFC-5xx folding machines Specifications - Infeed height: Maximum: 911 mm; Minimum: 429 mm - Format range: Minimum: 128 x 148 mm; Maximum: 558 x 850 mm - Machine speed: Up to 240 m/min

Tilstand: helrenovert (brukt), Funksjonalitet: fullt funksjonell, Plate Cutting System PA 4115 – 3100 x 3100 DNC-AT Condition: Fully Refurbished Ncodpjxhg Ibofx Ac Nsu Warranty: 1 Year Guarantee Technical specifications: Left-Side Angular Stop per AGA 4383 Longitudinal Panel Saw FM 16-3100: - Hardened guides - Automatic forward and reverse operation of the saw unit - Return stroke with automatic lowering - Feed speed: 2–50 m/min (infinitely variable via potentiometer) - Return speed: 70 m/min (rapid traverse) - Integrated extraction ducts in machine base and pressure beam - Scoring saw adjustable externally (without opening safety hood) Saw unit with regulated DC drive: - Precise positioning (e.g., for cutouts) - Slowed disengagement from cut - Includes safety hood interlock, lamella curtain SZ 5008 Scrap Cut Device SP 5004 – Remnant cuts down to min. 5 mm Saw Motor: 7.0 kW Scorer Motor: 1.1 kW (can be switched off separately) Cutting length: 3100 mm Cutting height: 70 mm Dust-tested: threshold of 2 mg/m³ is significantly undercut CE-compliant Angular Clamping Device WP 5003: - With clamping jaw for cross-cuts - Adjustment range up to 2400 mm - Semi-automatic operation Material Feed Table HP 5021 (mounted at the rear of FM 16): - Parallel stop with 6 spring-loaded clamping fingers - Direct drive of the material pusher via servomotor - Table surface with closed Pertinax panels (suitable for narrow strips) - Feed speed: 25 m/min (safety-limited) - Return speed: 40 m/min - Table length: 3100 mm - Stop depth: 3100 mm Multi-microprocessor control Integrated PC with hard drive Operating system: LINUX Interfaces: serial + parallel, USB Network connectivity (including wireless LAN) Cutting plans can be optimized in the office and sent directly to the machine Multitasking capable Print function via USB Remote maintenance via internet (Remote Desktop, TeamViewer) Multilingual dialog programming 15” flat-screen monitor + multifunction keyboard Swiveling control panel Graphic display of cutting plans and workflows Additional equipment: Angular stop table HP 5043 (front side): - Machined steel angle, table support with Pertinax surface - Table size: 1800 × 800 mm Workpiece support table HP 5025 (front side): - Pertinax surface - Table size: 1800 × 800 mm Air cushion device LK 5030 - Integrated into HP 5043 and HP 5025 Accessories: - 1 circular saw blade KSB 4005 – Ø 305 mm, Z=60 (for main saw) - 1 circular saw blade KSB 4006 – Ø 200 mm, Z=60 conical (for scoring saw)

Tilstand: god (brukt), Wilo DL-E 100/145-11/2-S1 Dry-Running Twin Pump Dry-running twin pump in inline design for installation in pipelines or on a foundation, with an integrated frequency converter for electronic control, for maintaining constant or variable differential pressure (Δp-c/Δp-v), among other functions. Design Electronically controlled, dry-running twin pump in inline configuration with flange connection and automatic power adjustment. Application Pumping of heating water (according to VDI 2035), cold water, and water-glycol mixtures without abrasive substances in heating, cold water, and cooling systems. Features/Functions Operating Modes - Δp-c for constant differential pressure - Δp-v for variable differential pressure - PID control - Setpoint operation (n=constant) Manual Operation - Setting the differential pressure setpoint - Setting the speed (manual mode) - Setting the operating mode - Pump ON/OFF setting - Configuration of all operating parameters - Fault acknowledgment External Control Functions - Control input "Priority OFF" - Control input "External pump changeover" (effective only in twin pump operation) - Analog input 0-10 V, 0–20 mA for setpoint operation (DDC) and remote setpoint adjustment - Analog input 2–10 V, 4–20 mA for setpoint operation (DDC) and remote setpoint adjustment - Analog input 0–10 V for pressure sensor signal - Analog input 2–10 V, 0–20 mA, 4–20 mA for pressure sensor signal Alarm and Display Functions - Collective fault signal (SSM) - Collective operation message (SBM) Data Exchange - Infrared interface for wireless data transfer with IR monitor/IR stick - Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for integration into building management systems Safety Functions - Full motor protection with integrated trip electronics - Access lock - Twin pump management (twin or 2 x single pump) - Main/standby operation (automatic fault changeover) - Main/standby pump changeover every 24 hours - Additive operation - Additive operation (efficiency-optimized peak load activation and deactivation) Your Advantages - Energy savings thanks to integrated electronic power adjustment - Easy handling using Green Button Technology and display - Several operating modes: main/standby operation and parallel operation - Configurable fault behavior tailored to heating and cooling applications - Integrated full motor protection (KLF) with trip electronics Drive - Power supply: - 3~380 V, 50/60 Hz Nodpfx Acowbqrto Nocu - 3~400 V, 50/60 Hz - 3~440 V, 50/60 Hz - Motor efficiency class: IE4 - Max. power consumption P1: 13,000 W - Motor rated power P2: 11 kW - Max. current Imax: 21 A - Max. speed nmax: 2,970 1/min - Emission of disturbances: EN 61800-3 - Noise immunity: EN 61800-3 - Insulation class: F - Motor protection rating: IP55 - Motor protection: integrated KLF Installation Dimensions - Installation length L0: 500 mm - Suction-side pipe connection DNs: DN 100 - Pressure-side pipe connection DNd: DN 100 RRP: €29,006.25 Financing through our bank is also possible. komplett-konzept.leasingo.de Find more new and used items in our shop! International shipping costs on request!