Universell testmaskinGALDABINI
Quasar 50 50 kN
Universell testmaskin
GALDABINI
Quasar 50 50 kN
fast pris pluss MVA
€ 21 000
Tilstand
Brukt
Plassering
Borken 

Bilder viser
Vis kart
Data om maskinen
- Maskinbetegnelse:
- Universell testmaskin
- Produsent:
- GALDABINI
- Modell:
- Quasar 50 50 kN
- Tilstand:
- svært god (brukt)
Pris og beliggenhet
fast pris pluss MVA
€ 21 000
- Plassering:
- Einsteinstraße 8a, 46325 Borken, Deutschland

Ring
Detaljer om tilbudet
- Annonse-ID:
- A18829901
- Referansenummer:
- 24571
- Oppdatering:
- sist oppdatert 28.03.2025
Beskrivelse
GALDABINI
Type: Quasar 50 / Rated Capacity: 50 kN
with PC, monitor, and GraphWork 5 test software
Universal Testing Machine
The universal testing machine type "QUASAR" is designed as a single test space machine and essentially consists of the following main assemblies:
Machine frame: The design and structure of the machine load frame are dimensioned where required for the stated maximum loads.
Electromechanical load application with toothed belt drive, toothed belt pulleys, drive with DC or brushless servomotor, and recirculating ball screws.
Load measurement system with a load cell suitable for both tension and compression.
Electronic control unit to perform all functions: regulation and control, monitoring and acquisition of the output signals from the measurement amplifiers for force, elongation, and crosshead travel.
The system is based on a 32-bit processor with a clock speed of 25 MHz; analog signals are captured by a 20-bit A/D converter.
The electronic controller is usually located in the base of the machine. This also applies to most electrical components of the drive and power supply.
Operator interface with PC, connected to the electronic control and monitoring board via a serial RS232 interface with high transfer rate of 38,400 baud.
Rigid two-column system with a maximum capacity of 50 kN
Suitable for metals, plastics, composites, and other materials
Modern design with advanced features
Flexible and modular design for easy future upgrades
Lodpsv Tywqsfx Aalehp
Key technical advantages include extremely high resolution of load and stroke values, and a minimum test speed of 0.0005 mm/min for top performance and the most precise results
Technical specifications:
- Rated capacity: 50 kN
- Speed at maximum load: 0.0005 to 200 mm/min
- No-load speed: 500 mm/min
- Distance between grips: 1000 mm
- Total travel: 1000 mm
- Crosshead travel resolution: 0.1 µm
- Positioning repeatability: 2 µm
- Distance between wedge grips: 480 mm
- Clearance between columns: 410 mm
- Force units: Newton, daN, kgf, lbs
Dimensions:
- Height: approx. 1548 mm
- Width: approx. 700 mm
- Depth: approx. 730 mm
Power supply: 220V (+10%) 50 Hz
Power consumption: 0.65 kW
Weight: approx. 255 kg without accessories
Recommended lighting for use: 300 lux
Condition: used
Scope of delivery: (see picture)
(Specifications and technical details subject to change and errors reserved!)
For further questions, we are happy to assist you by phone.
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Type: Quasar 50 / Rated Capacity: 50 kN
with PC, monitor, and GraphWork 5 test software
Universal Testing Machine
The universal testing machine type "QUASAR" is designed as a single test space machine and essentially consists of the following main assemblies:
Machine frame: The design and structure of the machine load frame are dimensioned where required for the stated maximum loads.
Electromechanical load application with toothed belt drive, toothed belt pulleys, drive with DC or brushless servomotor, and recirculating ball screws.
Load measurement system with a load cell suitable for both tension and compression.
Electronic control unit to perform all functions: regulation and control, monitoring and acquisition of the output signals from the measurement amplifiers for force, elongation, and crosshead travel.
The system is based on a 32-bit processor with a clock speed of 25 MHz; analog signals are captured by a 20-bit A/D converter.
The electronic controller is usually located in the base of the machine. This also applies to most electrical components of the drive and power supply.
Operator interface with PC, connected to the electronic control and monitoring board via a serial RS232 interface with high transfer rate of 38,400 baud.
Rigid two-column system with a maximum capacity of 50 kN
Suitable for metals, plastics, composites, and other materials
Modern design with advanced features
Flexible and modular design for easy future upgrades
Lodpsv Tywqsfx Aalehp
Key technical advantages include extremely high resolution of load and stroke values, and a minimum test speed of 0.0005 mm/min for top performance and the most precise results
Technical specifications:
- Rated capacity: 50 kN
- Speed at maximum load: 0.0005 to 200 mm/min
- No-load speed: 500 mm/min
- Distance between grips: 1000 mm
- Total travel: 1000 mm
- Crosshead travel resolution: 0.1 µm
- Positioning repeatability: 2 µm
- Distance between wedge grips: 480 mm
- Clearance between columns: 410 mm
- Force units: Newton, daN, kgf, lbs
Dimensions:
- Height: approx. 1548 mm
- Width: approx. 700 mm
- Depth: approx. 730 mm
Power supply: 220V (+10%) 50 Hz
Power consumption: 0.65 kW
Weight: approx. 255 kg without accessories
Recommended lighting for use: 300 lux
Condition: used
Scope of delivery: (see picture)
(Specifications and technical details subject to change and errors reserved!)
For further questions, we are happy to assist you by phone.
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
Merk: Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.
Registrert siden: 2012
Send forespørsel
Telefon & Faks
+49 2861 ... annonser
Disse annonsene kan også være av interesse for deg.
Annonse
Langenfeld (Rheinland)
1 048 km
Universal Testing Machine strekkprøvemaskin
GALDABINIQuasar 50 kN
GALDABINIQuasar 50 kN
Annonse
Sonsbeck
996 km
Strekkprøving maskin-universell testmaskin
Richard Hess MBV GmbHH3000-H5000TM mit Langwegextensometer
Richard Hess MBV GmbHH3000-H5000TM mit Langwegextensometer
Annonse
Borken
964 km
Klimatestkammer med fuktighet
WeissSB2/500/80 -75°C bis +180°C
WeissSB2/500/80 -75°C bis +180°C
Annonse
Tyskland
1 043 km
Universal-skap
MemmertUF30
MemmertUF30
Annonse
Borken
964 km
Fuktighetstestkammer 190 liter
VötschVC 7018 -70 bis 180°C
VötschVC 7018 -70 bis 180°C
Annonse
Borken
964 km
Pendel slagtester 5,5 J
Zwick RoellHIT5.5P
Zwick RoellHIT5.5P
Annonse
Borken
964 km
Klimatestkammer
VötschVC³ 4100
VötschVC³ 4100
Annonse
Borken
964 km
Universell testmaskin
ZwickRoellZ30
ZwickRoellZ30
Annonse
Borken
964 km
-70 °C til +180 °C
Vötsch 190 LiterVCS 7018-5
Vötsch 190 LiterVCS 7018-5
Annonse
Borken
964 km
Temperaturskap 990 liter
WeissWT3-1000/40 -40°C bis +180°C
WeissWT3-1000/40 -40°C bis +180°C
Annonsen din har blitt slettet
Det har oppstått en feil




































































































