Gravørslipemaskin

DECKEL S0 (SO)

Tilstand: verkstedoverhalt (brukt), Byggeår: 1996, Graveringsslipemaskin Fabrikat: Deckel Modell: S0 Årsmodell: 1996 – verkstedkontrollert Maskinnr.: 26617 Nlsdpfx Alox Hx Elowea Tilbehør: - Slipeskive med flens - Bruksanvisning Brukt, selges som den står Maskinen er teknisk i henhold til produksjonsårets standard.

Tilstand: ny, Bore- og fresemaskin OPTIMUM OPTImill MB 4 - Utstillingsmaskin - Nljdpfx Alou R Tftswja Dette tilbudet gjelder en utstyrspakke. Følgende artikler og opsjoner er allerede inkludert i prisen: - Bore- og fresemaskin OPTImill MB 4 Optimum - Maskinunderstell MSM 3 Optimum - Set med spennhylser MK 4/ER 32 – M16 Optimum - HSS IMUM skaftfres-sett - Presisjonsmaskinskruestikke FMS 100 Optimum - ny utstillingsmaskin -

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Weiler Matador VS-2 styring og trekkspindel dreiebenk Tekniske data: Nlodjvv Etvepfx Alwja >> Produksjonsår: ca. 1970 Maskin-nr. M1012 >> Spisshøyde: 140 mm >> Spissbredde: 500 mm >> Turtall: 30 – 3550 o/min >> Spindelboring: 36 mm >> Kortkonisk spindelhode DIN 55022-5 med bajonettlås >> Bakdokke MK 3 >> Mateskala: 0,010 til 1,184 mm/omdr. >> Mulige gjenger: metrisk, tomme, modul og diametral-pitch >> Metriske gjengestigninger: 0,25 til 15 mm >> Vekt: ca. 700 kg >> Lengde: 1,4 m, høyde: 1,2 m, dybde: 0,55 m Tilbehør og utstyr: >> Spennhylseinnretning med 32 stk spennhylser (satsen er ikke komplett) med feste >> 1 stk trebakkechuck, 1 sett bakker >> 1 stk firbakkechuck, 1 sett bakker >> Multifix størrelse A med 2 stk verktøyholdere >> Utskiftbare tannhjul >> Pinolstopper Om maskinen: Det tilbys en brukt Weiler Matador VS-2 i fullstendig funksjonell stand. Benytt anledningen til å inspisere maskinen under strøm på stedet og overbevis deg om tilstanden.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus lead and feed screw lathe from training workshop!!! Nsdpfxsvtp Edo Alwola Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm, 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 125 mm three-jaw chuck with 2 sets of jaws >> Collet chuck with 18 collets >> Multifix quick-change tool post size A with 3 tool holders >> Stop >> Electric spindle guard About the Machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides run very smoothly and evenly. Even at high spindle speeds, the Weiler runs quietly. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly, and it is possible to produce ground-like surface finishes. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Tilstand: svært god (brukt), Funksjonalitet: fullt funksjonell, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paintwork!!! Technical Data: >> Year of manufacture: approx. 1990 Machine No. 3150 >> Center height: 120 mm >> Distance between centers: 430 mm >> Speeds: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock taper: MK 2 >> Feeds: 0.03 to 0.15 mm/rev >> Possible threads: Metric, Inch, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Accessories and Equipment: >> 1 piece 125 mm three-jaw chuck, NEW, with 2 sets of jaws >> Multifix size A with 2 tool holders >> Collet chuck, new, with collets from 3 to 26 mm in 1 mm increments, new Nlodpfovivmyex Alwsa About the machine: A Weiler Primus lead and feed screw lathe is being offered in very good condition. The machine is, of course, fully functional. All slides move smoothly and evenly. The bed guides are in very good condition. The Primus was in use at a training center. This newer generation of Weiler lathes is very user-friendly and enables the production of surfaces similar to grinding. Take the opportunity to inspect this machine under power on site and see its condition for yourself.

Tilstand: brukt, Byggeår: 1992, Funksjonalitet: fullt funksjonell, Weiler Matador VS2 dreiebenk, årsmodell 1992, tre-bakket chuck, Multifix, bakre sprutvern, elektrisk chuck-beskyttelse. Maskinen er i god og bruksklar stand, og kan demonstreres under strøm etter avtale. Nledpfx Alex Sqvgowja

Tilstand: klar til bruk (brukt), Byggeår: 1991, Funksjonalitet: fullt funksjonell, dreiediameter over tverrsleiden: 280 mm, WEILER MATADOR VS2 Weiler Matador VS2 dreiebenk i svært god stand fra utdanningsinstitusjon, produksjonsår 1991, original lakk, med Heidenhain digitalavlesning og tilbehør. Tekniske spesifikasjoner: * Maskinnummer: 91-102 * Senterhøyde: 140 mm Nlsdpfoytd U Rjx Alwja * Avstand mellom sentre: 500 mm * Hastighet: 15 / 3550 o/min * Spindelgjennomgang: 36 mm * Spindelhode DIN 55027 -5 * Løpende brille MK 3 * Automatisk mating fra 0,012 til 0,9 mm/omdr * Mulige gjengeprofiler: metrisk, tomme, modul og diametral stigning * Metrisk gjengestigning fra 0,25 til 12 mm * Vekt ca. 700 kg Tilbehør og utstyr: * Heidenhain 3-aksers digitalavlesning * 3-klo stålchuck * Motor med brems * Multifix verktøylager med 4 holdere * Borkoks * Medløpende senter * Ukslingshjul * Elektronisk spindelbeskyttelse * Maskinmanual på tysk.

Tilstand: svært god (brukt), Byggeår: 1992, Funksjonalitet: fullt funksjonell, Weiler Praktikant 160 B lead and feed screw lathe with 3-axis digital readout from K&C, vocational school machine Technical specifications: >> Year of manufacture: 1992 Machine No. 92 160 3260 Nlodpfx Aox Eb A Uolwoa >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Feeds from 0.02 to 0.63 mm/rev >> Thread cutting capability: metric, inch, module and diametral pitch threads >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and features: >> 3-axis digital readout from K&C with operator manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> Collet chuck system with new collets from 3 to 26 mm, increasing in 1 mm increments >> 160 mm three-jaw chuck (Kelistangen) with 1 set of jaws >> Quick-change tool post with 4 tool holders >> Bed stop >> Electronic spindle guard >> Rear chip guard >> Coolant system >> Operating manual, spare parts list About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw precision lathe, year 1992, in very good condition. The machine is, of course, fully functional. All slides operate very smoothly and evenly. The Weiler runs quietly even at high spindle speeds. This newer generation of Weiler lathes is exceptionally user-friendly and can produce surfaces comparable to ground finish. You are welcome to inspect the machine under power on-site and see its condition for yourself.