Temperaturkammer 2000 liter

CTS T-40/2000 -40°C bis +180°C

CTS
Type: T-40/2000
Air-Cooled Temperature Test Chamber
Technical Specifications:
Cooling unit:
Air-cooled, low-noise, fully hermetic with stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerant R404A

Door:
Nedpfx Aeup T Uqoc Aoli
Full-opening door, hinge left, one-hand operation, lockable.

Tray rack:
Stainless steel, support surface 970 x 980 + 500 mm
Max. load per rack 35 kg
Max. total load with full rack placement 100 kg

Test Chamber Lighting: 3x halogen lamp 20 W, 12 V

Control:
32-bit controller
LCD control panel
Digital display of set and actual values
Numeric entry for setpoints
Plain text error messages
RS 232 interface
Free switching channels for customer-side test item activation

Temperature range: -40°C to +180°C
Rated voltage: 400V 3/N 50Hz
Rated power: 10.4 kW
Rated current: 17.2 A
Compressor: TFH2516Z
Pipe leadthrough NW 50
Control panel window: 570x710 mm
Electrical connection, cable length 5m

Technical performance data:
Temperature testing:
Temperature range -40°C to +180°C
Temperature deviation ≤ ±0.3 K over time
Temperature change rate according to IEC 60068-3-5
Heating: 2.5 K/min
Cooling: 1.5 K/min

Thermal radiation:
Approx. 2500 W at +20°C
Approx. 2100 W at 0°C
Approx. 1500 W at -20°C

Technical data refer to ambient temperature of +25°C, rated voltage 400V, without test specimen, without irradiation and without additional equipment.

Dimensions:
Test volume: 2000 liters
Test chamber dimensions: Height 900, Width 975, Depth 2200 mm
External dimensions: Height 1950, Width 1290, Depth 3145 mm

Operating data:
Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz
Rated power: 17.2 kW
Protection class: IP 22
Condensate drain: non-pressurized, R 1/2" female thread
Sound pressure level (measured according to DIN EN ISO 3744 at a distance of 1m from the front): < 55 dB(A)
Weight: approx. 1200 kg

Important information for you as a buyer!
The following points are carried out in advance on all chambers we offer:
1. Functional check and replacement of necessary components
2. If necessary, new refrigerant fill in compliance with legal regulations
3. Leak test with certificate
4. After successful review, the chambers undergo a documented test run.

Condition: used
Scope of delivery: (see picture)
(Subject to changes and errors in the technical data!)
We are happy to answer further questions by phone.

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.