Kjøp brukt vevemaskiner (7)

Tilstand: klar til bruk (brukt), Byggeår: 1991, En Dornier vevstol er tilgjengelig. Arbeidsbredde: 3300 mm. Dokumentasjon tilgjengelig. Inkludert vevskaft. Uten fortrukker. Besiktigelse på stedet er mulig. Ljdpjxl Un Rofx Aaxohf

Tilstand: klar til bruk (brukt), Byggeår: 2001, Fem Picanol rapiervevemaskiner er tilgjengelige. Arbeidsbredde: 1900 mm, antall innslagsfarger: 8. Inkludert 8 innslagsmater (feedere) og 8 skaftrammer. Dokumentasjon tilgjengelig. Besiktigelse på stedet er mulig. Lodpfx Aeyhgn Noaxshf

Tilstand: nesten som ny (brukt), Byggeår: 2003, Funksjonalitet: fullt funksjonell, Til salgs: flere Jakob Müller NFJM 53 - SPE 192 6/42mm, 192 kroker, fra årene 1999, 2000 og 2003. Overhalt i 2024 – som nye. Lhedpfx Aasv Hxq Aoxjf

Tilstand: god (brukt), Byggeår: 1989, maskin-/kjøretøynummer: AN-No.: 89.04.019 A, 5 stk. Jakob Müller Frick AG NF 42 i 5x 4/42mm med Müdata, Mütrans, uten grind, meget ren, fra Tyskland, 2. eier NF42 i 4/42mm fra 1988–1990 AN. nr.: 88.04.017 H ex. Alge, Müdata, 16 skaft, svært ren, € 7 000 AN. nr.: 88.04.169 D ex. Alge, Müdata, 16 skaft, svært ren, € 7 000, nr. 213 AN. nr.: 89.04.019 B ex. Alge, Müdata, 16 skaft, svært ren, € 7 000, nr. 223 AN. nr.: 89.04.046 B ex. Alge, Müdata, 16 skaft, svært ren, € 7 000 AN. nr.: 90.00.066 B ex. Alge, Müdata, 16 skaft, svært ren, € 7 000 Lhodpfjr I Am Hjx Aaxjf

Tilstand: brukt, Byggeår: 1988, Funksjonalitet: fullt funksjonell, Til salgs: Flere Jakob Müller MVC 150 maskiner av første generasjon selges (totalt 6 stk.): Ljdpfx Aaov Hxltjxohf MVC 150 8/46mm 1988 88.60237 nr. 309 MVC 150 8/46mm 1988 88.60085 nr. 319 MVC 150 8/46mm 1988 88.60319 nr. 332 MVC 150 10/36mm 1988 88.60041C nr. 314 MVC 150 10/36mm 1988 88.60041B nr. 313 MVC 150 6/66mm 1988 88.60000 nr. 307 År: 1988 Tilstand: godt fungerende og komplett Pris: 3.900,- Euro

Tilstand: god (brukt), Byggeår: 1989, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: AN-No.: 88.04.017 D, 8 very clean (refurbished) Jakob Müller Frick AG weaving looms NF42 from 1988, 1989, and 1990 from my inventory. The machines run flawlessly and are 100% fully functional (completely overhauled). - 12 shafts, without frames, with Mütrans, some with Müdata Overview of available machines: - 1 unit NF 2/84mm from 1989 for €6,900 AN-No.: 88.04.017 D with Müdata and Mütrans, 16 shafts - 3 units NF 2/84mm, overhauled, from 1990, each for €6,500 • AN-No.: 90.01.704 B • AN-No.: 90.01.755 A • AN-No.: 90.01.229 A - 1 unit NF 2/84mm, overhauled, from 1989 for €6,500 AN-No.: 89.00.118 D - 3 units NF 2/84mm, overhauled, from 1988, each for €6,500 • AN-No.: 88.04.244 A • AN-No.: 88.02.758 A • AN-No.: 88.02.758 B The machines come from a curtain tape production line and were originally fitted with a Z-compartment. These have been converted to standard compartments during complete overhaul. All take-up rollers and pressure rollers have been newly vulcanized by Westland. The card rollers in the chain housing are also new or newly vulcanized. Central lubrication in the chain housing optimized by us. All machines have the first shaft free (for heavier reeds) and are fitted with 12 shafts. All machines feature Mütrans II. Individual machines with double belt take-off for heavy fabrics can be supplied optionally (estimated possible for 4-5 machines). Option to equip with fine-knurled take-up rollers (also estimated for 4-5 machines). All needle holders are suitable for twin needles. For this, two additional Mütrans II can be installed on request. The machines have been completely rebuilt. All bearings, shafts, and bushings have been checked and replaced if required. All swing arms have been inspected and replaced as necessary. Installed: 1st shaft free (spacer block installed) 2nd & 3rd shaft: swing arm 201 4th to 6th shaft: swing arm 202 7th to 9th shaft: swing arm 203 10th to 12th shaft: swing arm 204 13th shaft: swing arm 205 All shaft springs checked and replaced if necessary. No parts are porous, cracked, or defective. The electrical installation has been tested, the thread monitoring PCB checked and, if required, repaired or replaced. Lhsdjr Ix Igopfx Aaxjf The machines are finished in RAL 6021 Müller pale green. All covers are clean and undamaged. The machines are supplied without Müdata. 4 machines are additionally equipped with a crawler gear. All machines have been set up and test run. Machines are supplied without oil, harnesses, slats, reeds, needles, or chain links. Delivery on Euro pallet, FOB Wuppertal.

Tilstand: brukt, Byggeår: 1991, Til salgs: 10 stk. Jakob Müller Frick CH MVC 150 Müdata 4 etikettvevstoler. Vi selger kun som et sett for €50.000. Pris per vevstol: €5.000. Maskindetaljer: - 1989, 12/30 mm, An: 89.30018 Müdata 4, nr. 70 - 1990, 12/30 mm, An: 90.30452 Müdata 4, nr. 71 Lsdpfx Aaev T Nb Sjxehf - 1990, 12/30 mm, An: 90.30370 Müdata 4, nr. 72 - 1990, 8/46 mm, An: 90.30337 Müdata 4, nr. 325 - 1991, 12/30 mm, An: 91.30247 Müdata 4, nr. 73 - 1990, 7/57 mm, An: 90.30166 Müdata 4, nr. 76 - 1990, 7/57 mm, An: 90.30461 Müdata 4, nr. 77 - 1990, 9/36 mm, An: 90.30371 Müdata 4, nr. 78 - 1990, 9/36 mm, An: 90.30080 Müdata 4, nr. 79 - 1991, 7/57 mm, An: 91.30312 Müdata 4, nr. 80 Alle vevstolene er i god stand og fungerer problemfritt.