Universell testmaskin

Zwick Z30

Tilstand: svært god (brukt), Byggeår: 2004, Løftekapasitet: maks. 1 500 kg Trådtykkelsesområde: 2,0 – 8,0 mm Iedpfx Aoipv R Tjgmsht Spole diameter: 1 100 mm

Tilstand: svært god (brukt), Haida Type: HD-B604-S Sensor: TECSIS lastcelle Maks. kapasitet: 2T / 20 kN Enhet: G, kg, N, LB (justerbar) Oppløsning: 1/250 000 Nøyaktighet: ± 0,5 % Maks. slaglengde: 700 mm (uten festeanordning) Testhastighet: 0,1–500 mm/min (justerbar) Spenning: 220 V AC ± 10 %, 50/60 Hz Kjeftåpning: 0–7 mm Vekt: ca. 175 kg Mål (B x D x H): 88 x 50,5 x 150 cm Tilstand: brukt Omfang av levering: (Se bilde) Ijdpor Ixq Rjfx Agmsht (Endringer og feil i de tekniske dataene forbeholdes!) Vi svarer gjerne på flere spørsmål over telefon.

Byggeår: 2013, Tilstand: god (brukt), Universell prøvemaskin Zwick/roll Type: 1488 Modernisert i 2013 med programvare Maks. prøvekraft: 200 kN Iedpfsxw N Uvex Agmeht Plassbehov: Bredde: 2 000 mm Høyde: 2 100 mm Dybde: 800 mm Vekt ca. 1 000 kg.

Tilstand: svært god (brukt), GALDABINI Type: Quasar 50 / Rated Capacity: 50 kN with PC, monitor, and GraphWork 5 test software Universal Testing Machine The universal testing machine type "QUASAR" is designed as a single test space machine and essentially consists of the following main assemblies: Machine frame: The design and structure of the machine load frame are dimensioned where required for the stated maximum loads. Electromechanical load application with toothed belt drive, toothed belt pulleys, drive with DC or brushless servomotor, and recirculating ball screws. Load measurement system with a load cell suitable for both tension and compression. Electronic control unit to perform all functions: regulation and control, monitoring and acquisition of the output signals from the measurement amplifiers for force, elongation, and crosshead travel. The system is based on a 32-bit processor with a clock speed of 25 MHz; analog signals are captured by a 20-bit A/D converter. The electronic controller is usually located in the base of the machine. This also applies to most electrical components of the drive and power supply. Operator interface with PC, connected to the electronic control and monitoring board via a serial RS232 interface with high transfer rate of 38,400 baud. Rigid two-column system with a maximum capacity of 50 kN Suitable for metals, plastics, composites, and other materials Modern design with advanced features Flexible and modular design for easy future upgrades Key technical advantages include extremely high resolution of load and stroke values, and a minimum test speed of 0.0005 mm/min for top performance and the most precise results Technical specifications: - Rated capacity: 50 kN - Speed at maximum load: 0.0005 to 200 mm/min - No-load speed: 500 mm/min - Distance between grips: 1000 mm - Total travel: 1000 mm - Crosshead travel resolution: 0.1 µm - Positioning repeatability: 2 µm - Distance between wedge grips: 480 mm - Clearance between columns: 410 mm - Force units: Newton, daN, kgf, lbs Dimensions: Ihsdpfx Agov Tywqsmot - Height: approx. 1548 mm - Width: approx. 700 mm - Depth: approx. 730 mm Power supply: 220V (+10%) 50 Hz Power consumption: 0.65 kW Weight: approx. 255 kg without accessories Recommended lighting for use: 300 lux Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors reserved!) For further questions, we are happy to assist you by phone.