Sentrals dreiebenk

Weiler Commodor Geometrisch Überholt

Tilstand: nesten som ny (brukt), Funksjonalitet: fullt funksjonell, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C, NEWLY Refurbished with Inspection Protocol for New Machine Tolerances Iaodpfjymznhox Albow Technical Data: >> Machine No.: 2268-87 >> Center Height: 180 mm >> Center Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock: Morse Taper 4 >> Feeds from 0.026 to 0.888 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch possible >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake connectable >> Drive power 2.0/4.0 kW >> Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-Axis Digital Readout K&C New, 12 months manufacturer's warranty with user manual >> NEW 3-jaw chuck 200 mm, 2 sets of jaws >> Multifix size B with 3 tool holders NEW >> Bed stop >> Machine feet >> Coolant device >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops On request: Lead and feed screw covers About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in a geometrically refurbished condition. The guideways have been newly ground and/or hand-scraped. Acceptance according to inspection protocol. Painted in 2K gloss white. The accessories (Multifix and chuck) are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops—a lathe in absolutely as-new condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to inspect the machine under power on site and convince yourself of its condition.

Tilstand: nesten som ny (brukt), Funksjonalitet: fullt funksjonell, Weiler Commodor lead and feed screw lathe with 3-axis digital readout by K&C, newly overhauled, including acceptance protocol ensuring new-machine tolerances Technical Data: >> Machine No. 2020 >> Centre height: 180 mm >> Distance between centres: 1000 mm >> Spindle speeds: from 13 to 2000 rpm >> Spindle bore: 56 mm Iodpfxovrckqo Albsaw >> Short taper spindle nose DIN 55029 Size 5 >> Tailstock: Morse taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Threads possible: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake switchable >> Drive power 2.0 / 4.0 kW >> Length 2.2 m, height 1.5 m, depth 1 m Accessories and features: >> 3-axis digital readout by K&C, new, 12 months manufacturer warranty with operating manual Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 items, taper calculation, radius/diameter, quick zeroing, count direction reversal, >> 3-jaw chuck, wedge bar type, as new, 200 mm, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine lamp For safety, the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the machine: For sale is a Weiler Commodor lead and feed screw lathe, geometrically overhauled. The guides have been newly ground or scraped, with inspection and acceptance according to test protocol. Coated in 2K glossy white paint. The Multifix quick change system and chuck are new. For safety, the machine features a brake motor, electronic spindle guard, and two emergency stops – a lathe in absolutely mint condition. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is highly user-friendly, producing surface finishes comparable to grinding. You are welcome to inspect the machine under power at our site and convince yourself of its condition.

Tilstand: nesten som ny (brukt), Funksjonalitet: fullt funksjonell, Weiler Commodor lede- og trekkspindel dreiebenk med 3-akset digitalt målesystem fra K&C, fullstendig overhalt med protokoll for toleranser som nye maskiner. Tekniske data: >> Maskinnr. 1824 >> Senterhøyde: 180 mm >> Senteravstand: 1000 mm >> Spindelhastigheter: fra 13 til 2000 o/min >> Spindelboring: 56 mm >> Korthylse-spindelhode DIN 55029, størrelse 5 >> Pinoldok med MK 4 >> Matinger fra 0,026 til 0,888 mm/omdr. >> Mulighet for gjenging: metrisk, tomme, modul og diametral-pitch >> Metrisk gjengestigning fra 0,35 til 12 mm >> Vekt ca. 1500 kg >> Spindelbrems kan kobles inn >> Motoreffekt: 2,0/4,0 kW >> Lengde: 2,2 m, høyde: 1,5 m, dybde: 1 m Tilbehør og utrustning: >> 3-akset digitalt målesystem fra K&C, nytt, 12 mnd. fabrikkgaranti med brukermanual Funksjoner: mm/tomme bytte, ABS/INC koordinatvalg, halvering av visningsverdi, referansemerke, verktøyprogrammering for 200 stykker, konusberegning, radius/diameter, hurtignullstilling, bytte av telle-retning >> 3-bakkers kraftchuck (kiletype), nesten nytt 200 mm, 1 sett bakker >> Multifix størrelse B med 2 stk. verktøyholdere, NY >> Sengestopp >> Maskinføtter >> Kjøleanlegg >> LED maskinlampe For sikkerhet er maskinen utstyrt med: >> Elektronisk spindelbeskyttelse >> Spindelbrems >> 2 nødstopper På forespørsel: Deksel for lede- og trekkspindel Om maskinen: Til salgs er en Weiler Commodor lede- og trekkspindel dreiebenk i geometri-overhalt stand. Styreskinner er nyslipt og / eller nyinnskrapt. Med overleveringsprotokoll. Lakkering i 2K hvit høyglans. Multifix og chucker er nye. Isdsvrcqdepfx Alboaw Sikkerhet: Maskinen har bremsemotor, elektronisk spindelbeskyttelse og to nødstopper – en tilnærmet ny dreiebenk. Også ved høye turtall går denne Weiler svært rolig. Denne nyere generasjonen Weiler-dreiebenker er svært brukervennlige og gir overflatekvalitet tilsvarende slipte flater. Kom og inspiser maskinen med strøm på stedet og se selv dens tilstand.