Endburr maskin

Vollma JK WS 25

Tilstand: god (brukt), Byggeår: 2003, X 1740 mm, Y 766 mm, Z 660 mm 10 000 o/min Delene som vises for hånd er ikke inkludert. Nsdowyblzspfx Ad Aswc

Tilstand: svært god (brukt), Byggeår: 2017, Funksjonalitet: fullt funksjonell, driftstimer: 16 193 h, vandring X-akse: 850 mm, vandring Y-aksen: 700 mm, bevegelsesavstand Z-akse: 500 mm, antall plasser i verktøymagasinet: 38, rotasjonshastighet (maks.): 15 000 o/min, svingvinkel A-akse (min.): −139 °, svingvinkel A-akse (maks.): 91 °, svingvinkel C-akse (maks.): 360 °, Recently, an identical machine was successfully auctioned! Placing a bid obligates the buyer to collect the machine on time by 31/03/2025! TECHNICAL DETAILS Travel X-axis: 850 mm Travel Y-axis: 700 mm Travel Z-axis: 500 mm Control type: Heidenhain TNC 640 Rapid traverse linear X-Y-Z: 35 - 35 - 35 m/min Acceleration linear X-Y-Z: 6 m/s² Feed force linear X-Y-Z: 7,000 N Max. throat depth: 625 mm Workpiece dimensions Max. diameter: Ø 650 mm Max. height: 500 mm Interference circle (A-axis) in 0° position: Ø 885 mm Spindle data Speed: 15,000 rpm Power/Torque: 20% duty cycle, 20 kW / 173 Nm Tool taper: SK 40 Tool interface Type: SK 40 Magazine stations: 38 pcs Chip-to-chip time: approx. 6 s Max. tool length: 300 mm Tool diameter with adjacent stations occupied: Ø 80 mm Tool diameter without adjacent stations: Ø 125 mm Max. tool weight: 8 kg Max. magazine load: 152 kg Swivel rotary table Clamping surface: Ø 650 x 540 mm Centering bore: Ø 32 H7 Swivel range: +91° / -139° Drive type C-axis: Worm drive Swivel axis A speed: 25 rpm Rotary axis C speed: 30 rpm Table load, one-sided drive: 600 kg Accuracy according to ISO 230-2 Deviation (A in X-Y-Z-Axis): ≤ 0.006 mm Cooling system (IKZ) Standard tank capacity: 122 l Coolant tank capacity: max. 570 l at 40 bar Pressure: max. 40 bar Flow rate: 11/27 l/min Main supply (IKZ): 400 V / 50/60 Hz Power consumption (IKZ): up to 20 kVA Filters: Safety filter, paper band filter Operating pressure Hydraulic pressure: 120 bar Compressed air: 6 bar Lubrication system: Minimum-quantity grease lubrication MACHINE DETAILS Control on-time: 24,403 h Machine on-time: 23,349 h Program runtime: 16,193 h Spindle operating hours: 13,916 h Weight: approx. 9.5 t Main supply Voltage: 400 V / 50/60 Hz Power consumption: up to 30 kVA EQUIPMENT - BLUM measuring probe Nwjdpfxov Hmdqs Ad Aec - BLUM laser tool measurement - Pull-out chip drawer - Swivel rotary table - Coolant gun - Emulsion mist extraction - Scraper belt conveyor - Air blow-off unit - Air blast through spindle center - Manual cabin door - Manual cabin roof - Polycarbonate safety windows - Electronic thermal compensation by Heidenhain - Electronic handheld control module by Heidenhain