Walk-in klimasimuleringscelle

TIRA KB 127 TCZ 4022 S -2K -40 bis +140°C

TIRA
Type: TCZ 4022 S -2K
Description: Climate Simulation Chamber, Air-Cooled
System Configuration:
The system consists of the following main components:
- Walk-in, insulated chamber
- Air treatment room
- Humidification system
- Machinery room
- Control cabinet
Technical Data:
Performance Range for Temperature Testing:
- Temperature range: -40...+140°C
- Temperature stability, supply air (over time): ≤ ± 0.5°C (without thermal test room load, according to DIN 50011 T13 / EN 60068)
- Temperature stability, supply air (spatial): ≤ ± 1.0°C (without thermal test room load, according to DIN 50011 / EN 60068)
- Heating rate (according to DIN 50011): approx. 2.0 K/min (without thermal test room load, according to DIN 50011 / EN 60068, without test specimen, in the temperature range of -30°C to +85°C)
- Cooling rate (according to DIN 50011): approx. 2.0 K/min (without thermal test room load, according to DIN 50011 / EN 60068, without test specimen, in the temperature range of -30°C to +85°C)
Performance Range for Climate Testing:
- Temperature range: +10...+90°C
- Humidity operating range: 10...approx. 95% RH (without thermal test room load)
- Dew point temperature range: +5...+89°C (without thermal test room load)
- Humidity stability (supply air, over time): ≤ ± 2.5% RH (measured in supply air)
Performance Range for Climate Testing with Heat Compensation:
- Temperature range: +15...+80°C
- Humidity: 15...approx. 80% RH (without thermal test room load, with max. 16 kW heat compensation)
- Dew point temperature range: +10...+74°C (without thermal test room load)
Dimensions:
- Test chamber (W x D x H): approx. 2260 x 4648 x 2260 mm
- External dimensions (W x D x H): approx. 2660 x 6460 x 2800 mm
- Clear door opening, test chamber door (W x H): 2260 x 2260 mm
- Climate module KB 127 (W x D x H): 1700 x 800 x 1400 mm
- Control cabinet (W x D x H): 800 x 500 x 2000 mm
Design:
- Air guidance: Supply air via perforated sheet at rear wall, in ceiling area; exhaust air via perforated sheet at rear wall, in floor area
- Temperature control: Direct cooling via evaporation of refrigerant in a finned heat exchanger; heating by electric resistance heater
- Dehumidification: Direct dehumidification via refrigerant evaporation in a heat exchanger
- Interior liner: Stainless steel
- Exterior cladding: Galvanized, plastic-coated sheet steel
- Floor design: Stainless steel, floor load capacity 15,000 N/m², wheel load (contact area ≥4cm²) 1500 N/wheel
- Door: Double-leaf door, stainless steel, externally coated with viewing window (W x H): 1000 x 1000 mm
- Test chamber lighting: 4 spotlights, 500 W each
- Insulation: Two-layer insulation, 80 mm PUR foam, 120 mm mineral wool
- Refrigeration unit (1 pc.): Bltzer 6G-30.2Y
- Refrigerant: R449A
- Refrigeration oil: SEZ 32
- Steam humidifier (1 pc.): EDB 40
Colors:
- Chamber: RAL9010, white
- Door: RAL9010, white
- Machine unit: RAL7032, pebble grey
- Control cabinet: RAL7032, pebble grey
Weights:
- Total unit: approx. 4900 kg
- Machine set KB 127: approx. 750 kg
- Control cabinet: approx. 120 kg
- Humidification system: approx. 64 kg
Connections:
- Rated voltage: 400 V +6%/-10% 3/PE N 50Hz
- Rated power: 95 kW
- Rated current: 150 A
Rsdpovx S Hhsfx Ad Aop

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.