Semitilhenger med walking floor
STAS 13.50 "ECOhddisc93" 92,5m³

Fast pris pluss MVA
22 680 €
Tilstand
Brukt
Plassering
Korschenbroich-Glehn Tyskland
Semitilhenger med walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Semitilhenger med walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Semitilhenger med walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Semitilhenger med walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Semitilhenger med walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Semitilhenger med walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Semitilhenger med walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Semitilhenger med walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Semitilhenger med walking floor STAS 13.50 "ECOhddisc93"   92,5m³
Semitilhenger med walking floor STAS 13.50 "ECOhddisc93"   92,5m³
more Images
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50
STAS 13.50

Grunnleggende data

Maskinbetegnelse:
Semitilhenger med walking floor
Produsent:
STAS
Modell:
13.50 "ECOhddisc93" 92,5m³
Tilstand:
brukt

Pris og beliggenhet

Fast pris pluss MVA
22 680 €
Selgers plassering:
Dieselstr. 9, 41352 Korschenbroich-Glehn, Tyskland Tyskland
Ring

Tekniske detaljer

Dimensjoner og vekt

Lasteromsvolum:
93 m³
Lasteromslengde:
13 535 mm
Lasteplassbredde:
2 480 mm
Lasteromshøyde:
2 825 mm

Aksler og hjul

Akselkonfigurasjon:
3 aksler

Flere detaljer

Første registrering:
12/2018

Detaljer om tilbudet

Annonse-ID:
A23344004
Referansenummer:
4430
Oppdatering:
sist oppdatert 17.11.2026

Beskrivelse

Chassis: Reinforced, continuous chassis design, new.
Superstructure: Self-supporting construction with corresponding reinforcements in the lower belt for particularly high stability and strength, 140 mm high reinforced cross members (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure (trailer construction max. 39,000 kg).

Axles and Suspension: "Disc brake 22.5"
Jost (DCA) axle assemblies, 3x9 tons with DCA air suspension, lifting and lowering function, Wabco Smartboard information center, electronic brake wear indicator (BVA) readable in the control unit (display), 1st axle can be lifted with starting aid (new EC regulation, without control unit option).

Tires and Wheels:
6 wheels with tires size 385/65 R 22.5, approx. 50-60% tread, on Alcoa DuraBright rims? 11.75x22.5 ET 120

Kingpin:
2" bolted into a 10 mm thick plate.

Landing Gears:
Mechanical landing gears with two speeds, 2x 20 tons support load with swivel foot.

Braking System:
According to EC standard, EBS E-system Wabco with RSS system (Roll Stability Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system.

Electrical System:
According to the guidelines of the EC standard 91/633 and 97/28 with 6 LED three-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED design, 2 reflective panels at the rear, position lights at the front 2x white, rear 2x red, 2 separate LED reversing lights integrated in the U-profile, 2 separate LED reversing lights on the side approx. at landing gear height.

Superstructure/Body: "Body fully welded inside", reinforced side walls.
Front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn, aluminum body, side walls 30 mm thick ALU plank profiles (2-3 mm), 600 mm wide, completely welded with upper and lower belt, plank profiles fully welded inside, floor as a sliding floor system on 140 mm ALU cross members, floor load approx. 9 tons/m2, cross members mounted close together (approx. 350mm), aluminum front wall with 600 mm plank profile, 2-3 mm thick, in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 rotary latch locks, mounted in the welded aluminum rear frame on Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, moving remainder unloading wall with Kevlar sheet approx. 1,800 mm long plus side Kevlar sheet sealing, aluminum wear plates on the side and rear approx. 2,000x1,500x4mm.

Hydraulic System: "Cargo - Floor" Sliding Floor System
Hnsdps Akp Rfsfx Andjw
Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lift slide bearings, type CF, 10 mm floor, ribbed design, hydraulics with approx. 200 mm working stroke, fixed points type "Faster" with high hydraulic locks mounted on the front wall, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electrical operation at the rear left with remote control integrated in a lockable, waterproof box, wear corners at the rear of the floor end.

Accessories:
6 PVC mudguards with

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.

Tilbyder

Registrert siden: 2002

18 Annonser på nett

Ring

Send forespørsel

Landus 
Tyskland
Østerrike
Sveits
USA
Storbritannia
Frankrike
Belgia
Spania
Mexico
Italia
Nederland
Polen
Den russiske føderasjonen
Hviterussland (Belarus)
Ukraina
Estland
Tyrkia
New Zealand
Irland
Tsjekkia
Danmark
Finland
Sverige
Norge
Luxembourg
Hellas
Litauen
Latvia
Island
Portugal
Brasil
Venezuela
Argentina
Ungarn
Slovakia
Romania
Moldova
Slovenia
Serbia
Montenegro
Albania
Kroatia
Bulgaria
Nord-Makedonia
Bosnia-Hercegovina
Israel
Egypt
Marokko
India
Indonesia
Sør-Korea
Japan
Thailand
Malaysia
Vietnam
Kina, Folkerepublikken
Taiwan
Iran
Bangladesh
Merk: Din forespørsel vil bli videresendt til alle selgere i maskinkategorien. Dermed kan du motta svært mange tilbud.
Forespørselen kunne ikke sendes. Vennligst prøv igjen senere.

Telefon & Faks

+49 2182 ... annonser