Dorn rør bøyemaskin

Sommer Maschinenbau S80

Dorn bending machine S8004
Dksdpfx Agsttah Rsdjp
-----
For the production of dimensionally accurate tube geometries with bending radii up to 1.5xD
→ Maximum bending capacity tube 76 x 4 mm (400 N/mm²)
→ Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²)
→ Maximum bending capacity tube 76 x 2.9 mm (stainless steel)
→ Total connected load 7 kW
→ Tube feed length 4.5 m

Robust and durable steel construction with a force-locking design – no torsion-prone design due to, for example, a split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touchscreen control panel allows simple and intuitive programming as well as operation of the system. After inserting the tube, it is clamped in place by the chuck in the carriage, enabling precise positioning of the tube and the creation of dimensionally accurate geometries. Standard features also include geometry verification before the bending process: if the bending process is started at an incorrect position, the machine will not release operation. This excludes operating errors. Optional additional features offer greater convenience and increase both output and efficiency of the system.

Data exchange with the optional TBS-3D tube calculation software (PC version) is carried out via USB stick or by FTP access from the computer to the machine controller. USB or LAN connectors (RJ45) are provided as standard. Existing tube geometries can thus be quickly and easily converted, e.g., via the STEP format.

Standard Equipment:
→ Electromechanical drive on the bending axis 4 kW
→ Rotation speed 2.9 rpm (=17°/sec)
→ Left-hand bending direction
→ Bending angle resolution 0.1°
→ Max. bending radius 200 mm
→ Bending shaft diameter 50 mm
→ Electronic length measurement ±0.1 mm
→ Electronic twist measurement ±0.1°
→ Manual stop system (flying stops for length)
→ Manual indexing system (15° for rotation)
→ Three-jaw chuck for locking the tube in the carriage
→ External control panel

PLC Control:
→ 10.1" touchscreen
→ ETH 10/100, X2X Link, USB
→ Foot switch operation
→ Data transfer via (W)LAN network or USB
→ Material database
Unique graphical programming: Simple geometries can be calculated directly at the machine. Once length and angle are entered, the controller directly calculates the feed and bending angles.

Hydraulics:
→ Hydraulic unit power 3 kW
→ Hydraulic tube clamping with adjustable clamping pressure
→ Programmable early mandrel retraction

Options (can be ordered as additional equipment):
→ Variable bending speed via frequency converter or servo motors
→ Automatic tool retraction (manual or controlled)
→ Pneumatic chuck
→ Automatic mandrel lubrication
→ Pneumatic stop system (length + rotation)
→ Mobile version (on rollers)
→ Radius extension

Images show new machine.

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.