Maskin for resonanstesting

SincoTec Power Swingly 20 kN EXCITING MOT

SincoTec
Type: Exciting Mot
POWER SWINGLY 20 kN Resonance Test Stand
The POWER SWINGLY BigTable resonance test stand is designed as a two-mass oscillator.
It consists of a vibration head, excited by an imbalance motor driven by a frequency-controlled asynchronous motor. The vibration head is located at the top of the machine and generates the dynamic amplitude.
The vibration head is supported against the upper crossbar via preloaded compression springs and is centrally guided.
The mid-load drive is located in the lower part of the machine and applies the static preload by means of a geared motor via a spindle drive.
The specimen chamber is positioned above the clamping table and is limited at the top by the adjustable crossbar.
The test stand is controlled by the EXCITING MOT control system.
All control electronics for the system are housed in an industrial PC cabinet.
The control cabinet is made of powder-coated sheet steel and meets protection class IP 50 according to EN 60529.
Technical Data:
General Data Test Stand:
Nwodpfx Agevx Su Ss Dop
- Total height: 1840 to 2240 mm
- Height of machine table: 1030 mm
- Width: 800 mm
- Depth: 1500 mm
- Maximum specimen chamber height: 600 mm (without load cell)
- Free column passage: 550 mm
- Maximum force amplitude: 10,000 N
- Maximum total force: ±20,000 N
- Maximum oscillation stroke: ±5 mm
- Test frequency: 30 to 110 Hz
- Sensor accuracy: at least Class 1 (DIN EN 10002-3)
- Weight of test stand: approx. 1,880 kg
- Max. weight of clamping device: 150 kg
General Data Control Cabinet:
- Total height: 1900 mm
- Height of desktop: 1080 mm
- Width: 650 mm
- Depth: 700 mm
- Weight: 152 kg
- Colour: RAI 9006 (White Aluminium), desktop Midnight
Site Requirements:
- Required space: 2.5 x 2.5 m
- Required ceiling height: 2.8 m
- Floor load capacity: 170 N/cm²
- Power supply: 400 V / 50 Hz (right-hand phase sequence)
- Connection plug: CEE socket, 5-pin, 16 A
- Fuse: 16 A
Connection and Environmental Conditions
Network Requirements:
- Voltage: 400 V three-phase with neutral conductor and protective earth, right-hand phase sequence
- Voltage fluctuation: < ±10%
- Short-term dips:

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.