Maskineringssenter med 5 akser

SHW UniSpeed 3000

x-travel 3000 mm
y-travel 1300 mm
z-travel 1300 mm
control Heidenhain TNC 640
spindle turning speed range 10 bis 6000 U/min
tool taper SK 50 BIG-PLUS
max. workpiece swing diameter 2400 mm
weight of the machine ca. t
dimensions of the machine ca. 10600 x 7800 x 3880 m
Only 6555 spindle hours!

EQUIPMENT/ACCESSORIES:

DRIVE SYSTEM
- Drive of the X, Y and Z axes by means of digital feed drives for
contour-accurate work with constant torque.
- Feed rate / rapid traverse in all axes 2-30,000 mm/min
- Acceleration values in all axes 2 m/s²
- Drive of the X-axis via a ball screw Ø80 mm
- Drive of the Y-axis via a ball screw Ø63 mm in conjunction
with hydraulic weight compensation
- Drive of the Z-axis via a ball screw Ø63 m


MAIN DRIVE

- 32 kW drive power at 100% duty cycle
- 44 kW drive power at 40 % ED


MAIN DRIVE UP TO 6,000 rpm
- Speed from 10 to a maximum of 6,000 rpm
- Torque 637 Nm at 100% ED
- Torque 875 Nm at 40 % ED
- According to wiring diagram E 741.0532.186


Beixxei
AUTOMATIC UNIVERSAL MILLING HEAD
IN ORTHOGONAL DESIGN
- Liquid-cooled milling head
- Cast construction made of GGG 60
- Axes swivel automatically
- Tilting range of the milling head holder (C-axis) infinitely variable ± 180
- C-axis drive via direct drive built into the headstock
- Swivel range of the milling head (A-axis) ± 90° in degrees
- Indexing of the A-axis via face gearing with
Partial accuracy ±3 sec
- The resulting positions can be programmed via the CNC control
can be programmed
- Milling head with maintenance-friendly half-shell technology
- Small interfering contour due to compact design and completely
internal media channels
- Tool holder according to selected variant
- The milling spindle is equipped with a hydromechanical tool
tool clamping system
- Internal coolant supply
- External coolant supply via nozzle ring
- Drive via frequency-controlled, liquid-cooled main drive motor
- Speed range depending on the selected speed option
of the main drive

STEPLESS C-AXIS
The continuously swiveling C-axis is built into the headstock. The drive
is driven by a liquid-cooled direct drive.
- Speed of the axis 20 1/min
- Continuous swivel range from 0° to 360
- Clamping torque of the axis 20,000 Nm
- Nominal motor torque of the axis 1,387 Nm at 100% ED


TOOL HOLDER SK 50 BIG-PLUS
Unless expressly described with a different tool holder,
all relevant machine components (milling head, tool changer,
magazine) are adapted to the SK 50 BIG-PLUS tool holder.
The tool pull-in force on the milling head is 20 kN.


MILLING HEAD INTERFACE 3-POINT / HIRTH
The orthogonal milling head / universal milling head is equipped with a face-
toothed
nozzle ring (Hirth ring) with integrated 3-point support. This
enables the retrofitting of supported tools (e.g. angle head).
angle head).

MAGNETIC CLAMPING PLATE
- Magnetic clamping plate surface mm 1,500×320
- Height of magnetic clamping plate mm 68
- Number of magnetic chucks pcs. 2
- Dimension of the fields mm 70×70
- Number of fields 42
- Number of clamping circuits 1
- Dimensions of fixed pole extensions mm Ø 70
- Height of fixed pole extensions mm 45
- Number of fixed pole extensions pcs. 6
- Dimensions of mobile pole extensions mm Ø 76
- Height of mobile pole extensions mm 45 +/-


ROUND TABLE

- with generously dimensioned storage and integrated pallet clamping station
- Clamping...