Automatisk kantlimemaskin

SCM STEFANI kd

TOP maintained edge banding machine from carpentry workshop, very good condition, very little used, fully controllable from the control panel, gluing with EVA and PUR glue possible, complete equipment in a very small space.

Feed speed 10 - 20 m/min.
Working height 8 - 60 mm
Thickness of strip edge 0.4 - 12 mm
Thickness of roll edge 0.4 - 3 mm
Max. dimension edge cross-section 135 mm²

Support roller track extendable 600 mm

Workpiece feed via panel transport chain. Chain slides on 2 guides made of hardened, ground steel.

Unit equipment:

"EASY SIZE PLUS" device:
Enables adjustment via the joint milling unit

RT-E jointing unit with 2 motors incl. diamond milling tools
- Motors 4 KW
- Diamond tools

Infrared heating zone for preheating the edge of the workpiece

Gluing unit "VC-S4.1"
Automatic gluing of rolls and strips with hot melt adhesive on straight panels
Glue container type "SGP" with automatic dosing via NC
Automatic emptying cycle with collected residual glue
on exchangeable container

edge magazine:
driven main pressure roller and the 1st holding pressure roller
cross-cut knife for automatic cutting of roll goods
Automatic feeding for strip goods
3 additional pressure rollers not driven
Adjustment of the pressure zone via NC

K/SEL" snipping unit
Flush trimming of the protruding edge at the front and rear
2 high-frequency motors
Automatic tilting of the saw blades
Double working position for snipping with or without overhang

Flush trimming unit "R-HP MULTIEDGE 2R"
flush trimming of the edge overhang at the top and bottom
Double pneumatic remote adjustment (top/bottom)
incl. multifunction cutter
Automatic adjustment of the unit for the following processing operations:
- Chamfering thin edges
- Flush trimming of thick edges with 2 different radii
- Flush trimming of solid wood edges max. 12 mm
- Different processing of top and bottom edges

ROUND MULTIEDGE" copy trimming unit
Rounding of straight or shaped corners and flush milling of the top and bottom
upper and lower panel side
- 2 high-frequency motors
- Vertical and frontal tracing rollers for maximum processing
accuracy
- max. feed rate 18 m/min. for corner rounding and max. 20 m/min.
For flush routing
Automatic adjustment of the aggrate for
- various thin edges
- Thick edges with radius
- Correction via machine control thanks to 2 controlled axes

Profile scraper unit "RAS-HP MULTIEDGE 2R
C93Cxcm
- Double pneumatic remote adjustment
- Tools with 2 different radii
Automatic adjustment of the unit for:
- processing of 2 different radii

Flat scraper unit "RCA/2C"
Removal of glue residue at the glue joint


"SPN" buffing unit
2 independent motors for cleaning and buffing the edge

Connected loads:
400 V, 50 Hz, 3 Ph

Control system:
"MAESTRO ACTIVE EDGE"
Touch screen with graphics & icons for easier operation
of the machine
Interface for the control of SCM edge banding machines

"eye-M" operating console with integrated PC

Further equipment:
- NESTING sensing rollers for panel processing with "nesting" work cycle
work cycle
- Feeding aid for narrow workpieces
- Release agent feed before joint milling
- Cleaning agent for edge finishing
- Spraying device for sensitive edges

Total machine length: 5,655 mm

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.