Eksentrisk trykk - enkelt kolonne

SCHULER PD 63-250

Byggeår: 2002, Tilstand: brukt, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required space approx. m T I M E S A V E R S (Netherlands) Wide-belt Deburring and Finishing – Grinding Machine Type 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial no. 2313-03 _____ Grinding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed steplessly adjustable approx. 1 – 10 m/min Consists of the following assemblies: 1.) Vacuum table with flat workpiece feed belt, vacuum track 780 mm in the belt center, Belt feed motor approx. 3 kW, frequency controlled for stepless feed 1 – 10 m/min, Toggle switch for belt forward and reverse, digital display for belt speed and stepless adjustment of table height. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, Belt speed approx. 11-22 m/sec, with fine height adjustment and pneumatic oscillation in cross direction, various grinding belts included. Ksdpfx Alet Hw Shobodp 3.) Vertical grinding/deburring disc (disc brushing system) approx. Ø 1200 mm, consists of self-adhesive non-woven nylon in different qualities available, specifically for deburring and cleaning surfaces and for radiusing edges of workpieces. Also suitable for workpieces with different heights. Drive approx. 7.5 kW, disc oscillates motorically (2.2 kW) over the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, Belt speed approx. 11 m/sec, with fine height adjustment and pneumatic oscillation in cross direction, various grinding belts included. 5.) Wet execution = complete coolant system consisting of Belt filter unit with pump integrated in the machine base, rotary feedthrough at the top of the deburring disc spindle, water return via vacuum table, as well as a water mist separator installed above the machine, with blower approx. 5.3 kW. Side doors made of stainless V2A sheet metal. Oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position display and speed indicators. Joystick for feed belt and table adjustment, 3 x ammeters, etc., as well as pressure rollers for workpieces at front and rear, emergency stop Total drive approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – powered-up and ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Tilstand: ny, Byggeår: 2026, Bore- and Milling Automation Kudu with CNC Control and Tool Changer (3-Axis) Bore- and milling automation system with a movable processing unit – the work table remains fixed while the drilling head moves. The drilling automation allows both manual and fully automatic operation. After each drilling cycle, the processing unit moves automatically along the X and Y axes to the next drilling position. The operation is kept very simple. Data transfer to the machine control can be handled via DXF/DWG file formats through a programming workstation. Alternatively, programming can also be done directly on the machine control panel. The machine is extremely robust and constructed with proven machine components. Technical specifications: • Measuring length: 6,000 mm • Overall length: 8,050 mm • Sturdy machine base • Drilling head speed: up to 2,500 rpm (standard version), supplied with the appropriate speed for your application • Tool holder: SK 40 • Drive for X, Y, and Z axes by servo motors • Rapid traverse in X axis: 20 m/min Ksdpjfu Ivzjfx Albjdp • Rapid traverse in Y axis: 5 m/min • Distance from table top to tool holder underside: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on tool) • Tapping: M4 – M30 (with floating chuck) • Y-axis machining stroke: 300 mm • Tolerance in X axis: ±0.1 mm • Tolerance in Y axis: 0.06 mm • Tolerance in Z axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Front safety via light barrier • Rear access protection: safety fence • Control: 21.5'' touchscreen panel, reinforced front glass • Simple programming at the machine • Milling of slots and circles • Lubrication via minimum quantity spray system • No material clamps included • Remote maintenance possible via Teamviewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed data • Workflow simulation • Digital handwheel Your advantages: • Gentle on workpiece surfaces • Intuitive, graphical user interface • Machining directly on workpiece ends is no problem • 50% space saving compared to conventional processing methods • Chips are collected in a chip tray • Easiest programming & operation • Minimum quantity spray system (standard) • Programming errors excluded by CAD/CAM integration You are welcome to visit and inspect the desired system in our production/demonstration hall at any time. Please contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Tilstand: god (brukt), Senterboring 2–50 mm Emnediameter 8–125 mm Emnelengde 50–1000 mm Kdodsrivluopfx Albjp Slipeskivehastighet 13 000–45 000 o/min Diverse tilbehør MARCELS MASCHINEN AG

Tilstand: god (brukt), Hydraulikkaggregat, hydraulikkpumpe, universell enhet, hydraulikkstasjon - Produsent: Rexroth/Hydraudyne, hydraulikkstasjon med oljekjøler / akkumulatortank / filter ... - Type: 03 HDJ - Motoreffekt: 22 kW/1460 o/min Kdodpfx Aljgz Irvobjp - Tankkapasitet: ca. 240 liter - Trykkindikator: opptil 250 bar - Enkeltkomponenter: Akkumulatortank/hydraulikktank/filter/ventiler – se bilder - Antall: 2 enheter tilgjengelig - Pris: per stykk - Mål: 1060/820/H1530 mm - Vekt: 738 kg

Byggeår: 2015, Tilstand: klar til bruk (brukt), En Nabertherm resirkulasjonskammerovn er tilgjengelig. Tilkoblet effekt: 30 kW, maks. temperatur: 650°C, volum: 500 l, oppvarmingstid: ca. 60 min, innvendige mål X/Y/Z: 750 mm/1000 mm/750 mm. Maskindimensjoner: ca. 1300 mm/1900 mm/1850 mm, vekt: ca. 750 kg. Dokumentasjon foreligger. Besiktigelse på stedet er mulig. Ksdoxrf Iujpfx Albodp

Tilstand: god (brukt), Byggeår: 2000, Funksjonalitet: fullt funksjonell, vandring X-akse: 2 050 mm, vandring Y-aksen: 520 mm, bevegelsesavstand Z-akse: 520 mm, rotasjonshastighet (maks.): 12 000 o/min, CNC-styring Heidenhain TNC 430 32-posisjons verktøyveksler Kjølemiddelutstyr 2x spontransportører Måleprobe Hele X-akse vandringen er 2050 mm, det betyr at du kan frese 2 meter i ett stykke. En skillevegg følger også med. Ved installasjon av skilleveggen deles X-aksens vandring opp. Tekniske data / technical details: X-akse vandring / X-travel 2050 mm Y-akse vandring / Y-travel 520 mm Z-akse vandring / Z-travel 520 mm Spindeltaper / spindle taper SK40 Turtallsområde / spindle speed 12000 omdr/min (rpm) Antall verktøyplasser i magasin / number of tool places in changer 2x 32 Spindel motoreffekt / drive capacity spindle 36 kW Vekt ca. / weight 12800 kg Kedpou Hf Ryjfx Albsdp Tekniske data, tilbehør og maskinbeskrivelse er uten forpliktelse - Technical data, accessories and description of the machine are not binding.

Tilstand: svært god (brukt), Byggeår: 2004, Engel Victory 80/45 Tech Kdjdpjh Rawbjfx Albjp Lukkekraft 45 tonn, søylefri Skrue 22 mm Årsmodell 2004 Styreenhet CC 200

Byggeår: 2017, Tilstand: klar til bruk (brukt), Et spinn-, strekk- og oppviklingsanlegg for produksjon av monofile garn, multifilament FDY og POY er tilgjengelig. Antall spinnplasser: 24, trådtellinger: 192, strekkprosess: kalde og varme galetter, spolebytte: uten trådbrudd, antall galetter oppvarmet/kald: 50/50, antall viklere: 24 (+2 reserveviklere). Inkludert diverse reservedeler for maskinen og elektronikk. Dokumentasjon tilgjengelig. Besiktigelse på stedet er mulig. Kdsdpfxeuanq Ts Albjp

Byggeår: 1990, Tilstand: brukt, maskin-/kjøretøynummer: 9072492, Nominell effekt: 100 kVA Utrigging: 500 mm Elektrodearmavstand: 330 - 500 mm Kdodpfx Asz H Dyslbep Elektrisk tilkobling: 400 V kW Plassbehov: 700 x 1420 x 2000 mm Vekt: 750 kg

Tilstand: brukt, Byggeår: 2004, Slipediameter: 250 mm Slipelengde: 650 mm Spisshøyde: 125 mm Maskinen selges med vedlikehold og ny geometri Driftstimer hittil: 12 260 Bakdokk med finjustering Slipespindelhode svingbart med 5° Hirt-forskjæring Kdjdpjywntyofx Albjp Papirbåndfilter Marposs målesystem Innvendig slipesystem