SCHLATTER NETTSVEISELINJE MG 24.1/8C

SCHLATTER MESH WELDING LINE MG 24.1/8C

SCHLATTER MG24 Welded Mesh Production Line

Completely refurbished

WORKING RANGE

Panel width: max. 2500 mm
Cross wire length: min. 900 mm
Nsdpfswu Tu Dsx Aqtowh
Cross wire length with QF5 distributor: min. 300 – 1600 mm
Distance between outer longitudinal wires: max. 2400 mm
Mesh length (longitudinal wire length): max. 2500 – 6000 mm
Longitudinal wire spacing: min. 100 mm
Cross wire spacing: 25–250 mm
Adjustable via cutting device (0–1)
Longitudinal wire diameter: 4.0 – 12.0 mm
Cross wire diameter: 4.0 – 12.0 mm
Number of longitudinal wires: max. 24

MG 24.1/8C MESH WELDING MACHINE, Basic equipment includes:

- 1 machine frame
- 1 upper support for press holding, continuously adjustable via hand crank
- 1 magnet support with retention magnets and cross wire monitoring
- 1 row of pneumatic solenoid valves for press actuation
- 1 installation for air and water supply
- 2 pneumatic rotary drives with oil damping
- Static torque with 5 bar compressed air: 480 Nm
- Front side continuously adjustable from 25 – 250 mm, adjustable via cutting device (0–1)
- 1 feed carriage with panel lifting device
- 1 set of tools for machine adjustment

WELDING SECTION includes:

8 C-type transformers
Rated power of each transformer: 100 kVA
Secondary open circuit voltage: 7.1 V
Secondary rated current: 14 kA
8 ES 130 thyristor contactors
12 welding presses: 5.0 kN
12 longitudinal current bridges for wire spacing: 50–100 mm
12 longitudinal current bridges for wire spacing (for staggered wires): 100 mm
10 longitudinal current bridges for wire spacing: 100–150 mm
8 longitudinal current bridges for wire spacing (for staggered wires): 150 mm
6 longitudinal current bridges for wire spacing: 150–200 mm
6 longitudinal current bridges for wire spacing (for staggered wires): 200 mm
24 lower copper electrode holders with standard angled electrodes and water-cooled current cable each, width: 58 mm
24 wire clamping holders
Panel width: max. 2500 mm
Cross wire length: min. 900 mm
Cross wire length with QF5 dispenser: min. 300 – 1600 mm
Outer longitudinal wire spacing: max. 2400 mm
Mesh length (longitudinal wire length): max. 2500 – 6000 mm
Longitudinal wire spacing: min. 100 mm
Cross wire spacing: 25–250 mm
Longitudinal wire diameter: 4.0 – 12.0 mm
Cross wire diameter: 4.0 – 12.0 mm
Number of longitudinal wires: max. 24

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.