Høyhastighets 4-sidig høvelmaskin

LEDINEK SUPERLES 300 5V-S150

4-sided planer for slats 300 x 120 mm
Adjustable feed speed from 30 to 150 m/min.
Equipment: 2 horizontal cutterheads (top and bottom) Z 10
2 vertical cutterheads (right and left) Z 10
Fitted with jointers.

- Horizontal shaft rotation speed: 5,500 rpm
- Vertical spindle rotation speed: 6,000 rpm
- Vertical spindle shaft diameter: 50 mm
- Vertical spindle clamping length: max. 185 mm

Tool diameters:
- Horizontal cutterheads: 205 mm
- Vertical spindle cutterheads: 160 - 205 mm

Cutterheads:
- Planer and thicknessing shaft with cutterheads:
- 2 x Planer head 205 x 330 mm, Z=10, screw clamping
Cpedpfx Aowz Nzmod Uow
- Planer knives for slats: 3 x 35 x 330
- 2 x Hydraulic planer head 190 x 130 mm, Z=10, screw clamping
- Planer knives for slats: 3 x 35 x 130

- Weight: approx. 13,000 kg
- Machine dimensions (L x W x H): approx. 3,800 x 2,800 x 2,400 mm
- Installed power: 154 kW

Additional Units

Bottom Scoring Saw
This unit is used for balancing groove machining on the underside of processed timber with a width over 200 mm. The saw blade is mounted with a flange directly onto a flat motor. Horizontal movement via pneumatic cylinder, scoring stroke approx. 150 mm (movement between boards; activated by a movable spot sensor). Area adjustment is manual. Travel stroke is shown by counter. Vertical movement via pneumatic cylinder, scoring stroke approx. 30 mm (enabling quick change during operation between slats with or without balancing groove).
End stop for scoring depth is adjusted manually. Travel stroke is shown by counter.
Slats must be fed into the machine individually one by one (not end-to-end).

Technical Specifications:
- Scoring saw: 15 kW
- Saw blade speed: 5,000 rpm
- Shaft diameter: 40 mm
- Max. cutting depth: 50 mm
- Tool diameter: 300 x 4 mm
- Extraction port diameter: 120 mm
- Additional feed rollers: one above, diameter 240 mm; one below, diameter 240 mm, toothed, hard chromed. Saw is delivered with blade.
- Scoring saw working area: from 37.5 to 225 mm

Motorised Lateral Infeed Roller
Pneumatically suspended. Width adjustment is motorised by push buttons. (If shaft positioning control is optioned, lateral pressure roller can be adjusted from control panel.) Set width displayed via SIKO digital counter.
- Roller diameter: 190 mm
- Roller height: 40 mm

Automatic Knife Setting Device (Jointer)
Knife setting device is fixed-mounted. Actuation is manual.

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.