Snekkermaskin

Krüsi CM40

Tilstand: god (brukt), Byggeår: 1996, Funksjonalitet: fullt funksjonell, KRÜSI Chaletbyggemaskin / Laftingslinje Type CM 40 POS 1: Motorisert rullebane Arbeidsbredde 400 mm, trinnløs matingshastighet 2,0 kW motor, lengde 6000 mm POS 2: Langsnittssag Sagbladdiameter 400 mm Pneumatisk dypdemating på sagen Hovedmotor 4,0 kW POS 5: KRÜSI Chaletbyggemaskin / Laftbyggingsmaskin Type CM 40 Maskinnummer: 431 Årsmodell: 1996 Sagaggregat: Manuell mating Spindeljustering med analog målevisning Pgedpfjhw N Npox Afwjw CM-freseaggregat: Hydropneumatisk mating Spindeljustering med digital målevisning Boreaggregat: Manuell mating Spindeljustering med analog målevisning Frontfreseaggregat: Hydropneumatisk mating Spindeljustering med digital målevisning POS 6: Motorisert rullebane Arbeidsbredde 400 mm, trinnløs matingshastighet 2,0 kW matingsmotor Lengde 12 000 mm 9 justerbare anslagsklaffer, pneumatisk styrt 10 sideskyvere for materialoverføring POS 7: Monteringsbord 4 400 mm x 12 000 mm Produsent: Sverige Årsmodell ca. 1985 Monteringsbord for videre bearbeiding av produserte laftekasser. 4 kjettingtaljer for tverrtransport Girmotor med 4,0 kW

Tilstand: god (brukt), Byggeår: 1994, Jeg selger et automatisk CNC-bearbeidingssenter for produksjon av laftehus, Krüsi CM-40. Årsmodell 1994. - Innsnittssag - Tappfres oppe og nede - Tappfres venstre og høyre - Dobbeltboreenhet - 4-hodet freseaggregat Pgsdpfx Aor Atcyofwsw - Automatisk mateanlegg med presisjon ±1 mm - Innmatingslengde: 12 meter Ideell for trekonstruksjoner! Tilgjengelig umiddelbart.

Tilstand: god (brukt), Byggeår: 1996, KRÜSI Chalet construction machine / log house production line type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: good, technically inspected and cleaned / ready for operation Pgsdpfx Asu Uh T Defwjw Operating principle: Processing structural timber for chalet construction / log house manufacturing. The beams can be processed in a single pass: • cutting to length • horizontal and vertical milling of tenons/grooves in one clamping • drilling • milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Robust welded construction. Machine (horizontal and vertical milling units) with 4 special milling motors, with hardened and ground guides for maximum machining precision. Carriage guided by dust-protected and preloaded ball bearing rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-side chip extraction, with 2 eccentric clamps, without milling tools (rebate cutter). With hydropneumatic horizontal and vertical feed, electrically controlled, synchronized with the start-up of the milling motors. Rapid traverse and feed speed infinitely variable. Fully wired and installed, including air maintenance unit. Planks thicker than 14 cm must be machined in two passes. Such planks must be repositioned for remachining by the excess thickness dimension. Machine protection covers over moving parts, gas spring counterbalanced. Machine description / equipped with: 1. Sawing unit: Manual feed Spindle adjustment with analog position display Max. saw blade Ø / bore Ø: 400 / 30 mm Carbide-tipped with chip depth limiter (climb cut) Adjustable riving knife Motor speed min⁻¹: 2,900 Power kW: 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter widths from 60 mm, only cutters made of aluminum alloy with indexable inserts may be used 2 motors, hydropneumatic feed, kW each: 2.2 Hydropneumatic feed Rapid traverse and working feed infinitely variable 3. Drilling unit: Manual feed Spindle adjustment with analog display Drill chuck: ER 25 collet Max. clamping Ø: 16 mm Max. drill Ø: 32 mm Motor min⁻¹: 1,450, kW: 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹ / 2,900, kW: 3.0 2 V-belts: SPZ 9.5x1000 La Pneumatics Customer-supplied operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption Nm³/h: 8 Electrical Operating voltage V/Hz: 380/50 Rated power kW: 8.8 - 15.8 depending on version Customer-provided fuse A: 3 x 25 slow-blow Max. simultaneous power usage kW: 4.4 Dimensions Machine width: 2,400 mm Machine depth: 1,600 mm Overall height, lower guard: 1,600 mm Overall height, upper guard: 2,200 mm Extraction connection Ø for underfloor extraction Weight: approx. 1,300 kg Incl. 2 x 6 m roller conveyors (2 x 4 m) Technical specifications subject to change!