Klingelnberg-komponent

Klingelnberg Tastgestänge für CS200 - ! -

Tilstand: brukt, Byggeår: 2007, Hjuldiameter – maks. 500 mm Hypoidjustering ±70 mm Akselvinkel 90° Avstand Y-akse 150 – 350 mm Avstand Z-akse 120 – 340 mm Turtallsområde – trinnløst 0 – 5000 o/min Dreiemoment ved spindelen 57 Nm Konus 99,2 mm Trekkraft – verktøyspenning 23 000 N Maks. bremsemoment 93 Nm Total tilkoblet effekt 20 kVA Totalt effektbehov 15 kW Maskinvekt ca. 6 t Plassbehov ca. 2,35 x 2,24 x 2,5 m Arbeidsområde: Kronhjulsdiameter maks. – 500 mm Hypoidjustering X (v) – ±70 mm Akselvinkel – 90° Avstand Y-(H) akse kronhjul/flens pinjongspindel – 150 ... 350 mm Avstand Z-(J) akse pinjong/flens kronhjulspindel – 120 ... 340 mm Kjdpfeukitxjx Abbond Pinjongspindel: Turtallsområde, trinnløst – 0 ... 5000 min⁻¹ Dreiemoment – 57 Nm ved n = 0 ... 1240 min⁻¹ Dreiemoment – 54 Nm ved n = 1240 ... 5000 min⁻¹ Innvendig konus (med adapter) – Ø99,2 mm (#39) Trekkraft for verktøyspenning maks. – 23 000 N Kronhjulspindel: Turtallsområde, trinnløst – 0 ... 3000 min⁻¹ Dreiemoment – 95 Nm ved n = 0 ... 750 min⁻¹ Dreiemoment – 93 ... 24 Nm ved n = 750 ... 3000 min⁻¹ Innvendig konus (med adapter) – Ø99,2 mm (#39) / (Ø35,6 mm (#14)) Trekkraft – Maks. 23 000 N Maksimalt kronhjuls-bremsemoment – 93 Nm opp til 3000 min⁻¹ pinjonghastighet ved i = 1:4 Maksimalt kronhjuls-bremsemoment – 93 Nm opp til 1200 min⁻¹ pinjonghastighet ved i = 1:1,6 Maksimalt kronhjuls-bremsemoment – 59 Nm opp til 1200 min⁻¹ pinjonghastighet ved i = 1:1 Elektrisitet: Total tilkoblet effekt – 20 kVA (effektiv maskinkapasitet) Spenning – 3 x 400V (andre alternativer på forespørsel) Spenningstoleranse – ±10% Frekvens 50 Hz (andre alternativer på forespørsel)

Tilstand: god (brukt), Byggeår: 2007, Hjuldiameter - maks. 500 mm Hjulbredde 200–400 mm Modul 12 Turtall 0–3250 o/min Bremsemoment opptil maks. 95 Nm Indre konus Konus #39 Styring Fanuc 16 Totalt effektbehov 15 kW Maskinvekt ca. 6 tonn Plassbehov ca. 2.350 x 2.240 x 2.500 mm EKSTREMT FLEKSIBEL TESTING AV HARDE, FERDIGE OG GRØNNE SPIRALKONISKE- OG Kedpfx Abevr Hf Eobend HYPOIDTANNHJULSATSER Kegelrad-testmaskinen T 60 er en CNC-testmaskin med tre lineære akser for helautomatisk hard- og myk-testing av spiralkoniske- og hypoidtannhjulsatser med 90° aksevinkel. Den tilbyr allsidige objektive og subjektive testmuligheter med turtall opptil 3.250 o/min og bremsemoment opptil maks. 95 Nm.

Byggeår: 2019, Tilstand: brukt, The EFD machine we offer has a capacity of 2000 mm, but once the MF and HF adaptation cabinets are installed, this stroke should be limited to approximately 1700 mm. It is equipped with a Siemens 840 D CNC controller, 3 digitized axes (Z, Y 200 mm, C), a double spindle with double tailstock operated by separate controls, 1 MF cabinet, and 1 HF cabinet. The machine specifications are as follows: height 4400 mm, maximum workpiece weight on the main spindle 600 kg. The maximum piece weight per spindle on the double spindle is 50 kg. The converter uses transistor technology, with a power rating of 300 kW, equipped with three frequency ranges: 100 kHz at 200 kW, 3 kHz, and 10 kHz at 300 kW. Parameter control is integrated in the 840 D CNC, monitoring: voltage, current, power, MF or HF frequency, quench shower flowrate via analog flow meter, quench water temperature with PT 100 sensor. A color printer is provided. I have also included the serial link option, which avoids the need to input the part program twice, once on the CNC and once on the RTM 100. PROPOSED EQUIPMENT: - 1 galvanically isolated mains transformer, 400 V three-phase + earth (for network disturbance reduction and operator safety). - 1 SINAC P M/H transistor-based converter: Power: 20 to 300 kW Frequency: 3 to 100 kHz - 1 medium-frequency adaptation cabinet with 55 VT 8 transformer: 1 capacitor bank for 3 kHz 1 capacitor bank for 10 kHz - 1 high-frequency adaptation cabinet without transformer: 1 capacitor bank for 100 kHz - 1 manual selector for choosing 3 and 10 kHz - 1 manual selector for choosing between 100 kHz and 3/10 kHz - 1 standard vertical continuous-feed machine type HGL 2000, 3 AXES, equipped with: • One Siemens 840 D CNC (replaced 3 months ago) • One X axis for vertical feed, approx. 1500 mm stroke depending on adaptation cabinets • One Y axis for horizontal feed, 200 mm stroke • One C axis (spindle rotation), maximum workpiece weight 600 kg, maximum workpiece diameter on spindle 500 mm (depending on inductor) • Double spindle with double tailstock • Hydraulic circuit with analog flow meter for quench water • Second hydraulic quench water circuit without flow meter, with solenoid valve actuated by part program, no flow meter provided Knedjxc Exhopfx Abbsd • Simple interface for connecting inductors in high frequency • Simple interface for connecting inductors in medium frequency • Operator access door - Process parameter control system type RTM 100 standard integrated in the 840 D CNC, with color printer - Electrical interconnections for medium, high frequency and low voltage - Complete documentation in French (operating and user manuals) The great versatility of this installation lies in the wide frequency range (low, medium, and high) provided by a single generator, which is what makes it so unique. The high 300 kW power enables the processing of large parts or two parts simultaneously.