CNC ROUTER (med kanten striper enhet)

IMA BIMA 310 V - 120/500

Tilstand: svært god (brukt), Plate cutting saw - Horizontal - With rear lift table Control: MCS Evolution Software Lift Table (mm) No. 1 Rear Pusher Program Controlled Pusher Divides No. 9 Clamping Grippers Ndsdop R Sdhspfx Aarod Max. Cutting Width (mm): 3300 Usable Stroke of Pusher (mm): 3300 Max. Saw Blade Projection (mm): 105 Max. Gripper Opening (mm): 105 Scoring Saw (Max. Saw Diameter): mm 200 Main Saw (Max. Saw Diameter / Power): mm 360 - kW 18 Adjustable Saw Carriage Feed (m/min): 5 - 120 No. 3 Front Air Cushion Tables Total Connected Load (kW): approx. 21

Tilstand: verkstedoverhalt (brukt), vandring X-akse: 310 mm, vandring Y-aksen: 294 mm, bevegelsesavstand Z-akse: 210 mm, totalvekt: 3 000 kg, spindelhastighet (maks.): 50 000 o/min, Used HSC Machine RXD5 -Overhauled- The machine is completely overhauled, inspected, and measured at our facility. The machine meets new machine tolerance standards again! Nodpjlzhhkefx Aaredd Working area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Linear axis drives: Linear motors on all axes. - Rotary axis drives: High-dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min on all linear axes. - Network connection - Tool measurement laser: Diameter and contour measurement, wear monitoring, and breakage control of milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction - RMS Main Jobmanager - Spindle max. 60,000 rpm HSK 25 - Tool changer with 24 positions for parallel tool change during main time - High-precision option - Remote maintenance via Teamviewer - Transport dimensions (machine): W 2,425 x L 1,925 x H 2,070 mm - Weight: approx. 3,000 kg An inspection of the machine in fully operational condition is possible at any time. You are also welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Tilstand: svært god (brukt), Ensidig kantlistemaskin (VENSTRE) Kanttykkelse på rull (min/maks) mm 0,3 - 3 Kanttykkelse i lister/strimler (min/maks) mm 3 - 12 Platetykkelse (min/maks) mm 8 - 60 Styring: ICOS open TS Materhastighet m/min (regulerbar) 4 - 20 Overtrykk: kileremdrevet Nedpfoflc Uhex Aarodd Sprayaggregat (for flytende anti-stick) Fugefresaggregat 08.376 (2 x Kw 3) Limingsenhet (Hot Melt Lim) 283.1513 Kantpresse-sone Kantmagasin for ruller (antall plasser) 1 Kappsagaggregat 08.415 (2 x Kw 0,66) Fresaggregat 08.055 (2 x Kw 1) 0°-30° Multifunksjonsaggregat (Radius-fresing og Formfresing) 08.342 (2 x Kw 0,66) Profiltrekkbladsaggregat 08.519 Flattrekkbladsaggregat 08.50 Poleringsaggregat 08.612 (2 x Kw 0,25)

Tilstand: ny, Type R-RP1300 Arbeidsbredde: 1300 mm Min. arbeidslengde: 500 mm Arbeidstykkelse: 3–200 mm Matinghastighet: 0–30 m/min Samlet motoreffekt: 30,37 kW Motor for første enhet: 15 kW Motor for andre enhet: 11 kW Børste for støvrensing: 0,37 kW Matingmotor: 4 kW Heisemotor: 0,37 kW Diameter på første valse: 240 mm Diameter på andre valse: 210 mm Slipbåndstørrelse: 1330x2200 mm Arbeidstrykk (luft): 0,6 mpa Kapasitet på støvavsug: 9600 m³/t Transportmål: 2700x2100x2400 mm Vekt: 3300 kg Ndedpfx Aaodflqajrjd

Tilstand: god (brukt), Byggeår: 2008, OMET FLEXY S330 Årsmodell: 2008 _____ Tekniske spesifikasjoner: • Antall farger: 8 • Bredde bane (web): 350 mm • Trykkbredde: 330 mm • Tørkesystem: o UV-tørking på alle trykkstasjoner o 3 ekstra varmlufttørkere Avspoling: Enkel Opprulling: Dobbel _____ Tilleggsutstyr / Ekstra funksjoner: • 3 koronautladningsenheter • 1 svingebom • Materialtykkelse: Min. 50 μm, Maks. 350 μm • 1 svingebom for kaldfolielaminering • 2 skjære-/kutteenheter • 1 lamineringsenhet for lakk- og selvklebende laminering Nsdpfou St R Ejx Aarsdd • Kaldfolie • Kamera-inspeksjon _____

Tilstand: brukt, Funksjonalitet: fullt funksjonell, Byggeår: 1999, Linde gaffeltruck H 45 D -04-600 Diesel Ndedjunztropfx Aarsd

Tilstand: nesten som ny (brukt), Tosidig kappsag A. COSTA PUMA 2/50 350/160 – Italiensk produksjon TEKNISKE SPESIFIKASJONER: - Maks. skjærebredde: 350 mm - Maks. skjærehøyde: 160 mm - Motorer: 37 og 45 kW - Fremmatingsmotor: 3 kW - Justering av bredde på nedre aksel - Maks. sagbladdiameter: 280 mm - Spindeldiameter: 2 x 60 mm - Hulldiameter: 2 x 80 mm - Beltebredde: 350 mm Ndjdpjqy E Rlsfx Aarod - Total effekt: 85 kW - To fremmatingshastigheter: 15 og 22 m/min - Sentral smøring - Minste emnelengde: 600 mm - Elektrisk høydejustering - Justering av akselhøyde - Seks øvre trykkvalser - Mekanisk trykk for valser - Fire tilbakeslagsstoppere - Støpejernskonstruksjon - Avsugsstuss diameter: 2 x 220 mm - Spindelrotasjon: 4500 o/min - Maskindimensjoner (L/B/H): 250 / 235 / 210 cm - Vekt: ca. 5000 kg

Tilstand: god (brukt), Byggeår: 1996, KRÜSI Chalet construction machine / log house production line type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: good, technically inspected and cleaned / ready for operation Operating principle: Ndedpfou Uh T Dsx Aarod Processing structural timber for chalet construction / log house manufacturing. The beams can be processed in a single pass: • cutting to length • horizontal and vertical milling of tenons/grooves in one clamping • drilling • milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Robust welded construction. Machine (horizontal and vertical milling units) with 4 special milling motors, with hardened and ground guides for maximum machining precision. Carriage guided by dust-protected and preloaded ball bearing rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-side chip extraction, with 2 eccentric clamps, without milling tools (rebate cutter). With hydropneumatic horizontal and vertical feed, electrically controlled, synchronized with the start-up of the milling motors. Rapid traverse and feed speed infinitely variable. Fully wired and installed, including air maintenance unit. Planks thicker than 14 cm must be machined in two passes. Such planks must be repositioned for remachining by the excess thickness dimension. Machine protection covers over moving parts, gas spring counterbalanced. Machine description / equipped with: 1. Sawing unit: Manual feed Spindle adjustment with analog position display Max. saw blade Ø / bore Ø: 400 / 30 mm Carbide-tipped with chip depth limiter (climb cut) Adjustable riving knife Motor speed min⁻¹: 2,900 Power kW: 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter widths from 60 mm, only cutters made of aluminum alloy with indexable inserts may be used 2 motors, hydropneumatic feed, kW each: 2.2 Hydropneumatic feed Rapid traverse and working feed infinitely variable 3. Drilling unit: Manual feed Spindle adjustment with analog display Drill chuck: ER 25 collet Max. clamping Ø: 16 mm Max. drill Ø: 32 mm Motor min⁻¹: 1,450, kW: 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹ / 2,900, kW: 3.0 2 V-belts: SPZ 9.5x1000 La Pneumatics Customer-supplied operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption Nm³/h: 8 Electrical Operating voltage V/Hz: 380/50 Rated power kW: 8.8 - 15.8 depending on version Customer-provided fuse A: 3 x 25 slow-blow Max. simultaneous power usage kW: 4.4 Dimensions Machine width: 2,400 mm Machine depth: 1,600 mm Overall height, lower guard: 1,600 mm Overall height, upper guard: 2,200 mm Extraction connection Ø for underfloor extraction Weight: approx. 1,300 kg Incl. 2 x 6 m roller conveyors (2 x 4 m) Technical specifications subject to change!

Tilstand: ny, Byggeår: 2025, Arbeidsbredde: 400 mm Arbeidshøyde: 300 mm Minste emnelengde: 250 mm Nsdei Hpk Uspfx Aarsdd Aggregater: 2 børsteenheter, individuelt justerbare 1. børste: Scotch Brite Medium / diameter 220 mm, variabel drift 2. børste: Scotch Brite Hard / diameter 220 mm, variabel drift Høydejustering: Håndhjul Høydevisning: Mekanisk tellerverk Matehastighet: 4 - 12 m/min Motoreffekt børster: 2 x 3 kW, begge med trinnløs variabel drift Motoreffekt mateverk: 0,37 kW Maskinlengde: 1400 mm Maskinbredde: 900 mm Vekt: 500 kg

Byggeår: 1998, Tilstand: god (brukt), Jeg selger en dybbelboremaskin med dybbelinnsats KOCH Sprint-PTP Årsmodell: 1998 Antall dybbelspindler: 1 Antall innsatshetter: 1 Ndjdpod Exwgefx Aared Programmerbar CNC-motorisert Z-akse Arbeidsbredde: 1200 mm Maks. arbeidshøyde: 36 mm Umiddelbart tilgjengelig for salg