Kjedelig og dowel sette maskinen

GÖTZINGER PowerDrill m. Duebeleintreiben

Bore diameter variable, mm
Number of horizontal drilling heads: 3 pcs.
Number of vertical drilling heads: 4 pcs.

Götzinger Power Drill in special design with dowel glue and press-in station

With the Götzinger PowerDrill, depending on the type and configuration, you can:

- Drill on end grain and longitudinal sides
- Dowel assembly for front doors, supports, transoms
- Drilling patterns are freely programmable
- You can drill: handle olives and corner bearings with quick-change multi-spindle drilling heads
- You can mill and drill: lock cases, handle holes, PZ, and 3D-hinges
- The machine is equipped with horizontal and vertical milling units
- A simple control system allows you to create, store, and recall drilling and milling programs

POWER DRILL – Drilling and Milling Machine

Universal drilling machine for drilling handles, corner bearings, dowel work
along and across the grain, milling, lock cases, hinges, etc.

Base frame of robust design, sheet-metal covered
Table surface: 1800 x 200 mm

Processing unit:

X-axis – 500 mm usable travel
Y-axis – 100 mm
Z-axis – 105 mm

1 horizontal drilling unit (dowel drilling unit, left)
Iijdpfx Agjd Ih Hyegei
Drilling motor 380 V, 1,100 W
Collet chuck d=8/10
Speed adjustable 4,000 – 11,000 rpm

1 vertical drilling unit from above – fixed mount
Drilling motor 1.1 kW, 3,000 rpm
Quick-change drill head system

1 drill head BKF 2/3, quick-change, (corner bearing)
On separated single part, fittings as per customer specification, incl. drill set

Control: electro-pneumatic with three axes
NC-positioning controller and integrated machine functions
Input via 10” TFT color display

Complete machine, CE-compliant, with 1 set of drilling tools
Dowel drills d=6, 8, 10, 14 mm each, 2 roughing cutters d=16 mm,
1 cutter d=20 mm, ready for connection

1 drill head BKF 3, quick-change for olives, incl. drill set
Fittings as per customer specification

2 drilling units
1x horizontal for drilling from above (for hinges)
1x vertical for dowel work, right-hand side
Drilling motor 1,100 W, infinitely variable
4,000 – 11,000 rpm with collet chuck ER 20

2 milling units for lock case
1x horizontal for hinges, lock cases
1x vertical from above for PZ, handle holes, hinges
Milling motor 2.2 kW
Speed adjustable 3,000 – 16,000 rpm
Collet chuck ER 25

1 length stop right and left, usable length 2.8 m, NC-controlled
When using length stop, the fixed stops are omitted.

Dimensions:
LxWxH = 2.50 x 1.50 x 2.20 m – Machine weight 850 kg PowerDrill
LxWxH = 0.30 x 0.30 x 6.00 m – Length stop weight 100 kg

1 dowel glue and press-in station consisting of:

- Vibratory feeder drive for dowel supply
- Dowel press-in station
- High-pressure glue pump in stainless steel with glue container
- Full jet valve for precise, clean glue application
- Blow-out nozzle

Surcharge for 1 dowel diameter
The base machine becomes approx. 300 mm longer as a result

(Technical data as per manufacturer – no guarantee!)

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.