Arbeidsplattform semitrailerFAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
 Arbeidsplattform semitrailer
FAYMONVILLE
        MAX Trailer MAX200 Telesattel Megatrailer    
                                                     fast pris pluss MVA                                            
                                            € 49 750                                    
            Tilstand        
            Brukt                    
            Plassering        
                                                Essen                                            

 Bilder viser            
 Vis kart            
Data om maskinen
Pris og beliggenhet
                             fast pris pluss MVA                    
                            € 49 750                    
- Selgers plassering:
-     Heegstraße 6-8, 45356 Essen, Tyskland             
 Ring            
Tekniske detaljer
- Maksimal lastevekt:
- 38 390 kg
- Totalvekt:
- 48 000 kg
- Akselkonfigurasjon:
- 3 aksler
- Første registrering:
- 03/2024
- Neste kontroll (TÜV):
- 03/2026
- Total bredde:
- 2 540 mm
- Utstyr:
- ABS
Detaljer om tilbudet
- Annonse-ID:
- A20421315
- Referansenummer:
- 33271
- Oppdatering:
- sist oppdatert 31.10.2025
Beskrivelse
        You can find our complete range of vehicles, including immediately and short-term available units, on our website.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
Rodpfxsxth Ads Abrech
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Excerpt from the equipment list. Full specification available on request.
- Loading platform in extendable design with pneumatically operated locking mechanism
- 2 pairs of lashing rings (LC 5,000 daN)
- 1 pair of lashing rings (LC 10,000 daN)
- 6 pairs of outward-folding lashing rings (LC 5,000 daN)
- 2 pairs of outward-folding lashing rings (LC 10,000 daN)
- JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load)
- Tyres: 245/70 R 17.5 3PMSF
- BPW axles and suspension
Rodpfxsxth Ads Abrech
- 2 rigid axles, 1 trailing steered axle
- Air suspension with raise/lower valve
- Brake system in compliance with EU regulations, EBS-E (2S2M)
- Load gauge for axle load measurement, including load chart
- 2-inch kingpin
- One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high
- Galvanized, extendable width extensions, approx. 230 mm per side
- 6 pairs of WADER container pockets in the deck, suitable for 1x20' container, 2 x 20' containers, or 1 x 40' container flush at the rear
- 10 pairs of stake pockets (approx. 100 x 50 mm) in the outer frame of the deck
- 3 crosswise-mounted stake pocket rails (approx. 100 x 50 mm) on the deck
- One transverse INOX toolbox under the loading platform, approx. 565 x 290 x 810 mm
- Mount for ALU loading ramps, transversely under the platform behind the axles
- Adjustable hanging rails for aluminium loading ramps at the rear of the vehicle
- 2 LED reversing lights mounted on the rear panel
- HRM metallic coating (High Resistance Metallisation) of the outer frame
- Single-colour paint finish in RAL 3002 carmine red
Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.
Tilbyder
            Merk:        Registrer deg gratis eller logg inn, for å få tilgang til all informasjon.    
Registrert siden: 2003
Send forespørsel
Telefon & Faks
                            +49 201 8... annonser                
            Annonsen din har blitt slettet            
            Det har oppstått en feil            
















