Makuleringsmaskin i tre

Erjo 204MA

Tilstand: klar til bruk (brukt), Gjenvinningslinje for plank med følgende maskiner: En 2-blads kantmaskin for plank En enkeltbladet horisontal båndsag Transportsystem mellom maskinene er inkludert. Hfedpfxogwqk Sj Adkeh

Tilstand: god (brukt), Byggeår: 2006, maskin-/kjøretøynummer: 108111, Funksjonalitet: fullt funksjonell, arbeidsbredde: 240 mm, høvlingshøyde: 160 mm, arbeidshøyde: 180 mm, Fireside fire four-sided planer after service inspection, machine weight 3900 kg. Hfedevrq U Dspfx Adksh

Tilstand: svært god (brukt), Byggeår: 2005, Funksjonalitet: fullt funksjonell, Brukt Andritz Paladin 600B Inkludert kombinert rustfri innmatingsskrue og mikser, 2 x 55kW motorer, andre motorer etter avtale Hjdpfox N T Uaox Adksfh Innvendig inspisert for 2 år siden Inkluderer ramme for valse- og matriseskift

Tilstand: god (brukt), Byggeår: 2000, Funksjonalitet: fullt funksjonell, Cambio 500 avbarkingsanlegg bestående av: Innløpssentralisering. Cambio 500: Rotoråpning 495 mm. Minste stokkdiameter 90 mm. Hfjdpfxswxdimo Adksh Driftsmotor 55 kW. Matingmotor 11 kW. 80 m/min. Hydraulisk rotor og matevalser. Uttaksstyringsenhet. Tipptrau for langved. Reservedeler.

Tilstand: brukt, Byggeår: 2006, Funksjonalitet: fullt funksjonell, Komplett briketteringslinje 2 x RUF 330. Fyrrom, trommeltørker, transportører. Hfedpfoxazhtex Adkeh

Tilstand: brukt, Byggeår: 1995, Brukt van Aarsen C750 pelleteringspresse Inkluderer mate-skrue, mikser, Hjdpfev Skriex Adkjfh 160 kW IE3 WEG-motor, annen motor mulig etter avtale Automatisk rulljustering Innmat ble overhalt for 2-3 år siden Inkluderer valser og understell Inkluderer verktøy for valse- og matrisebytte

Byggeår: 2000, Tilstand: svært god (brukt), Ta kontakt for ytterligere informasjon. Hfedpfx Adjk Nn Ilokeh

Tilstand: ny, Byggeår: 2008, Funksjonalitet: fullt funksjonell, maskin-/kjøretøynummer: 2008-176, Cambio 500 (Söderhamn Eriksson) er en avbarker for små stokker opptil 495 mm (20 tommer) i diameter. Den opererer med matehastigheter opptil 120 m/min (393 ft/min). Takket være sin pålitelighet, minimale vedlikeholdsbehov og svært lave driftskostnader, er Cambio 500 førstevalget for ledende treforedlingsbedrifter over hele verden. Triangulært matesystem og barkeverktøy med hardmetallspisser drevet av trykkluft er blant nøkkelfunksjonene som sikrer suverent avbarkingsresultat. Hfodpfx Ajyl Aqhedkjh Leveres komplett med matebånd. Maskinen har ikke vært i drift og har vært lagret.

Tilstand: brukt, Nr. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, year of manufacture 2017 Thermal treatment plant / thermal chamber for modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient processing of 2 to 3 batches per day, depending on wood thickness and species. The system features a high-performance energy and heat transfer system and operates with a gas- or oil-fired boiler, using thermal oil as the heat transfer medium. Technical data: Capacity: 5,950 - 9,900 m³ of wood per year (with 330 working days) Usable volume: 9 m³ (at 50 mm wood thickness) Stack dimensions: 10,500 x 1,300 x 1,100 mm (L x W x H) Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating capacity: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm duplex stainless steel EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized steel sheet Main components: 1. Autoclave where thermal treatment takes place 2. Vacuum system to evacuate the autoclave before heat is introduced 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and cooling system: Heat exchangers: 8 units (4 per side) Material: stainless steel tubes (seawater-resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) Display: 22" color monitor with IBM computer and printer Sensors: 4 x PT100 temperature sensors 2 x mechanical thermometers 1 x vacuum/pressure transmitter 1 x mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transport of wood trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heater module Stainless steel safety chimney (300 mm diameter, 6,000 mm length) Function description: 1. Loading the autoclave with wood 2. Creating a preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Creating a final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Designed according to EN 13445 Sale on behalf of customer, ex works near 5020 Salzburg (Austria), without disassembly, transport, or installation Disassembly, loading, and transport by us possible on request Errors in description and pricing excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Hfsdjv Si Szopfx Adksh Sale takes place as is Technical details, condition description, year of manufacture, and scope of delivery as per manufacturer's brochure or prior owner, without guarantee Subject to prior sale For used machinery, all warranties are excluded; sold as seen Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or dispatch Delivery terms: ex works

Tilstand: brukt, Valon Kone VK26M Hfsdpfx Adovgtz Nskeh Med mate- og utmatingsbånd.