Strømforsyning til laboratoriet

EA Elektro-Automatik EA-EL 9080-170 B

EA Elektro Automatik
Type: EA-EL 9080-170 B

Electronic DC Load, USB / Analog / Master-Slave, Programmable, 80V, 170A, 2.4kW
Technical Data:
Mains voltage: 90...264 V AC
Mains connection type: Socket
Mains frequency: 45...65 Hz
Mains fuse: T 6.3
Power consumption: Max. 90 W
Leakage current: < 3.5 mA
DC Input
Input voltage: 80 V
Input power: 2400 W
Input current: 170 A
Overvoltage protection range: 0...1.03 * UNom
Overcurrent protection range: 0...1.1 * INom
Overload protection range: 0...1.1 * PMax
Max. permissible input voltage: 88 V
Min. input voltage for IMax: Approx. 2.2 V
Temperature coefficient of set values Δ / K Current / Voltage: 30 ppm
Voltage control
Adjustment range: 0...81.6 V
Stability at ΔI < 0.05%
Accuracy (at 23 ± 5°C): ≤ 0.1% UNom
Display: Accuracy ≤ 0.1% UNom
Remote sensing compensation: Max. 5% UNom
Current control
Adjustment range: 0...173.4 A
Stability at ΔU < 0.1% INom
Accuracy (at 23 ± 5°C): ≤ 0.2% INom
Display: Accuracy ≤ 0.1% INom
Rise time 10...90% INom < 23 μs
Nedpfx Ajuv Eudodpodd
Fall time 90...10% INom < 46 μs
Power control
Adjustment range: 0…2428 W
Accuracy (at 23 ± 5°C): < 0.5% PMax
Display: Accuracy ≤ 0.2% PMax
Resistance control
Adjustment range: 0.04…15.3 Ω
Accuracy (at 23 ± 5°C): ≤1% of resistance end value + 0.3% of INom
Display: Accuracy Included in set value accuracy
EL 9080-170 B:
Analog Interface:
Setpoint inputs: U, I, P, R
Actual value outputs: U, I
Control signals: DC on/off, remote control on/off, R-mode on/off
Status signals: CV, OVP, OCP, OPP, OT, PF, DC on/off
Galvanic isolation to device: Max. 400 V DC
Sampling rate setpoint inputs: 500 Hz
Isolation:
Input (DC) to chassis
DC minus: continuous max. ±400 V
DC plus: continuous max. ±400 V + max. input voltage
Input (AC) to input (DC): Max. 2500 V, short-term
Climatic Conditions:
Cooling type: Temperature-controlled fans
Ambient temperature: 0...50 °C
Storage temperature: -20...70 °C
Digital Interfaces:
Built-in: 1x USB-B for communication, 1x USB-A for functions, 1x Master-Slave bus
Slot for digital modules (optional): CAN, CANopen, Profibus, Profinet, RS232, Ethernet, ModBus TCP, EtherCAT
Galvanic isolation to device: Max. 400 V DC
Connections:
Rear: Share bus, DC input, AC input, sense, analog interface, USB-B, master-slave bus, interface module slot
Front: USB-A
Dimensions:
Case (WxHxD): 19" x 2U x 464 mm
Total (WxHxD): 483 mm x 88 mm x 538 mm
Standards: EN 61010-1:2007-11, EN 61000-6-2:2005, EN 61000-6-3:2006 Class B
Weight: approx. 11 kg
Condition: used
Scope of delivery: (See photo)
(Subject to changes and errors in the technical data, specifications may vary!)
We are happy to answer further questions by phone.

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.