Mobil palleomvikler

ATLANTA - mobiler StretchWickler SFERA Easy PowerStretch 120-400%

Stretchwrapper ATLANTA SFERA Easy
6 individually programmable wrapping cycles
Wrapping height: 2150 mm
Mast height: 2050 mm (fits through almost any door)
Film Powerstretch: 120-400%
Motorised pre-stretch system with infinitely variable adjustment
Pre-stretch ratio adjustable via control panel from 120% to 400%
Film application tension electronically controlled via control unit
Quick-change system (IEF) for easy film roll replacement
Film specification: Max. outer diameter Ø300 mm – height = 500 mm – core Ø76 mm
Film tension can be stored in 4 steps
Geomagnetic compass (GMK), always stops at the start position
Manual roping function at the film carriage for reinforcement wrapping

TECHNICAL DETAILS:
Two maintenance-free AGM batteries 12 V – 100 Ah, connected in series
160 pallets per charge – Charging time: 8 - 10 hours
High-frequency battery charger with LED indicator
Wrapping height 'machine with mast (pallet included)': 2,150 mm
Height detection via photoelectric sensor or manual entry via display
Safety bar for emergency stop of drive unit
Emergency stop switch according to CE regulations
Acoustic warning signal and warning light when machine starts
Fall protection for the film carriage
Start & stop pushbutton
Machine operation in accordance with CE standards Ø 22 mm

ADJUSTABLE PARAMETERS VIA CONTROL PANEL:
All function parameters adjustable via display
F00 - Display lock for program modification
F02 - Adjustable machine travel speed around the pallet up to 80 m/min
Carriage speed upward and downward individually adjustable
F03 - Carriage ascent speed from 1.3 to 5.4 m/min
F04 - Carriage descent speed from 1.3 to 5.4 m/min
F05 - Number of wraps at pallet base (1 - 10 wraps)
F06 - Number of wraps at pallet top (1 - 10 wraps)
Fodpjrqgivjfx Abhoft
F09 - Setting of pallet wrapping height
F13 - F16 - Film tension base & top wrap / ascent & descent individually adjustable
F17 - F20 - Film pre-stretch base & top wrap / ascent & descent individually adjustable
F62 - Ergonomic height for film change
Display of film consumption (option for PRS – PS)

ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL:
6 storable wrapping programs for SFERA EASY
F01-1 - Cross-wrap (up/down)
F01-2 - Single wrap (up only or down only)
F10 - F11 - Wrapping cycle with preset start and stop height
F12 - Wrapping to a fixed height (disabling the photoelectric sensor)
F21 - Wrapping cycle for large-dimension pallets
F22 / F23 - Wrapping cycle for top sheet application
F29 - Soft start cycle for corner protection application
F30 - F31 - Wrapping cycle with reinforcement and adjustable wrap count
Soft start to reduce film tears on sharp pallet edges
Wrapping cycle with manual or motor-driven roping (optional)

Additional units available from Ludwigsburg stock.
Was a customer replacement unit.
Excellent condition.
Immediately available.
Inspection in Ludwigsburg possible by appointment.

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.