Pallepakker Dreieskive-strekking

ATLANTA - 25mm flacher Drehteller SYNTHESI - 200% Vorreckung

Showroom machine, like new.

SYNTHESI with a flat turntable
Turntable height: 25 mm
Short ramp, 500 mm long

Manual rope forming device mounted on the frame at the pallet for reinforcement of the wrapping

TECHNICAL DETAILS:
Turntable LOW PROFILE
· Height: 25 mm
· Max. pallet dimensions: 1000 x 1200 mm
· Max. load capacity: 1200 kg
· One ramp included

Wrapping height (incl. pallet): 2,200 mm
Height detection via photoelectric sensor
Frequency-controlled turntable drive (soft start - start/stop)
Frequency-controlled carriage speed upward/downward
Acoustic signal at wrapping start and cycle end
Emergency stop switch according to CE regulations
Hodpfx Aoykucmebwonh
Turntable always stops in same home position
Crash protection for film carriage
Push buttons for machine on, start & stop functions & reset according to CE standards, Ø 22 mm

ADJUSTABLE PARAMETERS VIA CONTROL PANEL
All function parameters adjustable via display
F00 - Program change display lock
F02 - Infinitely variable turntable speed 5-12 rpm
Carriage speed upward and downward independently adjustable
F03 - Carriage upward speed from 1.3 to 5.4 m/min
F04 - Carriage downward speed from 1.3 to 5.4 m/min
F05 - Number of wraps at pallet base (1-10 wraps)
F06 - Number of wraps at pallet top (1-10 wraps)
F09 - Photoelectric sensor delay for wrap height
F13-F16 - Film tension at foot & head wrapping / ascent & descent independently adjustable
F62 - Ergonomic height for film change
Film consumption display (optional)

WRAPPING PROGRAMS ADJUSTABLE VIA CONTROL PANEL
6 programmable wrapping cycles
F01-1 - Cross wrapping (upward/downward)
F01-2 - Simple wrap (only upward or only downward)
F01-3 - Push button for manual functions
F10-F11 - Wrapping cycle with pre-set start and stop height
F12 - Wrapping to a stored height (with photo sensor deactivated)
F22/F23 - Cycle for top cover film
F29 - Soft start cycle for application of edge protectors
F30-F31 - Reinforced wrapping cycle with adjustable number of wraps
Soft start to minimize film tears on sharp pallet edges
Wrapping cycle with manual or motorized rope forming (optional)
Reinforcement cycle via push button

FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH"
Film pre-stretch ratio set to 200%
Film application tension electronically controlled via control unit
Film specification: Max. outer diameter Ø250 mm – Height = 500 mm – Core Ø76 mm
Standard connection values: 230V – 1Ph+N+PE – 50/60 Hz
Total power: 1.2 kW / 8A
Optional: Gear for OPRS pre-stretch ratios of 150% / 250% / 300%

Other machines available ex-stock Ludwigsburg.

Annonsen ble oversatt automatisk. Oversettelsesfeil kan forekomme.